diff --git a/ChangeLog b/ChangeLog index 06efddbbd..21a575d9d 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,507 +1 @@ -****** Release of sane-backends 1.0.25. End of code freeze ****** - -2015-09-30 Rolf Bensch - * doc/descriptions/pixma.desc, doc/sane-pixma.man: - Canon PIXMA MG5600 Series is working, reported by Gavin Falconer. - -2015-09-26 Rolf Bensch - * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.23 - -2015-06-22 Louis Lagendijk - * doc/saned.man: updated to clarify systemd integration and - configuration for thecase where saned is compiled with systemd - glue. - -2015-09-18 Rolf Bensch - * backend/pixma_imageclass.c: for all adf scanners restrict maximum page - height at flatbed scans - -2015-09-16 Stéphane Voltz - * backend/niash.c: merged pu/protect-niash-option-access-315132 and - ifdef'ed unused code - -2015-09-16 Stéphane Voltz - * backend/pieusb.c: include sane/config.h first - -2015-09-14 Stéphane Voltz - * backend/bh.c: replace mktemp by mkstemp #300134 - -2015-09-13 Paul Newall

- * backend/kodakaio.c: - redundant variable bitposn and redundant function kodakaio_rxflush - commented out. - -2015-09-09 Stéphane Voltz - * doc/sane-genesys.man, doc/descriptions/genesys.desc: No LiDE 120 - support. - -2015-09-08 m. allan noah - * backend/artec_eplus48u.c: fix HOME env bug #315071 (from Jörg Frings-Fürst) - -2015-09-03 Rolf Bensch - * backend/pixma_mp810.c: Canon Pixma MP990 needs specific reordering pixels - for 4800 dpi, patch from Guillaume Courtois. - * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.22 - -2015-08-20 Rolf Bensch - * README.linux: add mandatory and optional development environment to - install description - * frontend/scanimage.c: remove atexit() function. In some cases atexit() - doesn't work with libusb-compat. - -2015-08-10 Rolf Bensch - * backend/pixma_io_sanei.c: EOF is a bjnp timeout error. - * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.21 - -2015-08-10 Stéphane Voltz - * backend/abaton.c, backend/agfafocus.c, backend/apple.c, - backend/bh.c, backend/coolscan.c, backend/dmc.c, backend/ricoh.c, - backend/s9036.c, backend/sp15c.[ch], backend/tamarack.c: - fix for memleak in sane_get_devices (bugs #300132 #300131 #300130 #300129 - #300127 #300126 #300124 #300122 #300121 #300120) - -2015-08-10 Klaus Kämpf - * backend/pieusb.c, doc/descriptions/pieusb.desc, doc/sane-pieusb.man, - backend/pieusb_buffer.c, backend/pieusb_scancmd.c, backend/pieusb_specific.c, - backend/pieusb_usb.c: - New scanners PIE PowerSlide 3600,3650,4000,5000 / Reflecta DigitDia 3600, - 4000, 5000, 6000; ProScan 7200; CrystalScan 7200. These scanners need - further testing. - -2015-08-08 Stéphane Voltz - * backend/test.c: fix memleaks (#313553) - * configure.in, configure: don not harcode -I/usr/local/include - (#315060) - - open/close tests. -2015-08-07 Rolf Bensch - * README.linux: update development packages list. OpenSuse needs - libusb-compat-devel. Sane doesn't support libusb 1.0. - * backend/pixma_io_sanei.c: EOF isn't an usb timeout error; this fixes usb - communication problems, e.g. with OpenSuse. - * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.20 - -2015-08-06 Stéphane Voltz - * backend/genesys_devices.c, backend/genesys_gl841.c, backend/genesys_low.c: - fix GPIO setup for LiDE 33/40/50, add more usleep() for GL847 - scanning issues. Some GL841 LEDADD improvements. - -2015-07-31 Stéphane Voltz - * frontend/tstbackend.c: add an option to do tests scans during - open/close tests. - * backend/genesys.c, backend/genesys_low.c: fixes for - - #315104 - - #315105 - And a timing issue on USB3 hardware debugged and tracked by John S. - Weber - -2015-07-29 Rolf Bensch - * backend/pixma_mp150.c, doc/descriptions/pixma.desc, doc/sane-pixma.man: - New scanner Canon PIXMA MG3600 Series. This scanner needs further testing. - * backend/pixma_mp150.c: Canon PIXMA MG7500 Series doesn't need special - image format post processing. - * doc/descriptions/pixma.desc, doc/sane-pixma.man: - Canon PIXMA MG7500 Series is working, reported by Jonathan Anderson. - * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.19 - -2015-07-24 Rolf Bensch - * doc/descriptions/pixma.desc, doc/sane-pixma.man: - Canon PIXMA MX470 Series is working, bug #314894. - -2015-06-27 Louis Lagendijk - * backend/pixma_bjnp.c: added missing return in case of no error - -2015-06-27 Louis Lagendijk - * backend/pixma_bjnp.c Added backend version in bjnp debug output - -2015-06-11 Stéphane Voltz - * backend/genesys.c backend/genesys_gl124.h: LiDE 120 support - improvement. - -2015-05-18 Rolf Bensch - * backend/pixma_imageclass.c, doc/descriptions/pixma.desc, doc/sane-pixma.man: - New scanner Canon i-SENSYS MF8300 Series, reported by Florian Nierhaus. - * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.18 - -2015-04-12 Stéphane Voltz - * doc/sane-genesys.man backend/genesys.[ch] backend/genesys_low.c: - fix calibration cleared when calibration file loaded, - add expiration time option for cache. - -2015-04-07 Rolf Bensch - * backend/pixma_mp810.c: Canon Pixma MP990 TPU scan patch from Guillaume - Courtois. - * doc/descriptions/pixma.desc: remove unmaintained websites - * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.17 - -2015-04-03 Rolf Bensch - * backend/pixma_imageclass.c, doc/descriptions/pixma.desc, - doc/sane-pixma.man: New Canon scanners i-SENSYS MF210 Series, MF220 Series, - MF5900 Series, MF6100 Series and imageCLASS MF810/820. All scanners need - further testing. - * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.16 - * backend/pixma.[ch], backend/pixma_common.[ch], backend/pixma_imageclass.c, - backend/pixma_io_sanei.c, backend/pixma_mp150.c, backend/pixma_mp7[35]0.c, - backend/pixma_mp810.c: update copyright. - -2015-03-17 Stéphane Voltz - * backend/genesys.c, backend/genesys.conf.in, - backend/genesys_devices.c, backend/genesys_gl124.c, - backend/genesys_gl124.h, backend/genesys_low.h, - doc/descriptions/genesys.desc, doc/sane-genesys.man: add support for - Canon LiDE 120 - -2015-03-14 René Rebe - * backend/avision.h backend/avision.c: - fixed 32-bit build regression due new feature_type and - reverted 4d38523bdacd18186857ee8a93daaa0f8721c89b - -2015-03-13 René Rebe - * doc/sane-avision.man, backend/avision.h, backend/avision.c: - fixed newer avision scanner duplex scanning, and removed unnecessary - feature_type2 clutter by using a uint64_t to share all bits - -2015-03-12 René Rebe - * doc/descriptions/avision.desc, backend/avision.c: - fixed multiple regressions (range initilaizer, clobbering - paper-length window bits, ...) introduced over the past years, added - support for newer ASIC gamma table size, added AV220D2+ ID -2015-03-04 Stéphane Voltz - * doc/descriptions/genesys.desc: mark LiDE 120 as unsupported. - -2015-03-02 Stéphane Voltz - * backend/genesys_low.c, backend/genesys_gl124.[ch]: - improve parking reliability for LiDE 210 - -2015-03-01 Stéphane Voltz - * backend/genesys_devices.c, backend/genesys_gl124.c: - final tuning for Canon LiDE 220 - -2015-02-26 Stéphane Voltz - * backend/genesys.c, backend/genesys.conf.in, - backend/genesys_devices.c, backend/genesys_gl124.c, - backend/genesys_gl124.h, backend/genesys_low.h, - doc/descriptions/genesys.desc, doc/sane-genesys.man: add support for - Canon LiDE 220 - -2015-02-21 Rolf Bensch - * backend/pixma_mp150.c: Canon PIXMA MG6400 Series doesn't need special - image format post processing. - * doc/descriptions/pixma.desc, doc/sane-pixma.man: - Canon PIXMA MG6400 Series is working, reported by Christian Spielberger. - * backend/pixma_mp150.c, doc/descriptions/pixma.desc, doc/sane-pixma.man: - New scanners Canon PIXMA MX490 Series and E480 Series. All scanners need - further testing. - * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.15 - -2015-02-09 Rolf Bensch - * doc/descriptions/pixma.desc: Canon PIXMA MX920 Series supports Ethernet - and WiFi interfaces. - -2015-02-06 Rolf Bensch - * doc/descriptions/pixma.desc, doc/sane-pixma.man: - Canon PIXMA MG2500 Series is working, reported by Brenda Ruch. - -2015-01-20 Ilia Sotnikov - * backend/hp5590.c: - Invert pixels in case of TMA Negatives source has been selected. - Thanks for Will Kranz who reported this. - -2015-01-17 Rolf Bensch - * doc/descriptions/pixma.desc, doc/sane-pixma.man: - Canon PIXMA MG2200 Series is working (bug #314944). - -2014-12-31 Paul Newall

- * backend/kodakaio.c: - connection to device moved from sane_open to sane_start - disconnection move from sane_close to sane_cancel - in order to fix bug where scanner disconnected after 30s idle. - -2014-12-19 Paul Newall

- * backend/kodakaio.c: - param.depth corrected for lineart mode, was 8 now 1 - sequence of modes changed to make the color mode the default. - -2014-12-16 m. allan noah - * sanei/sanei_usb.c: add calls to sanei_usb_set_altinterface in - sanei_usb_close and sanei_usb_clear_halt- hopefully work around - USB3/xhci problems in Linux. - -2014-11-18 Rolf Bensch - * backend/pixma_imageclass.c: - - Canon i-SENSYS MF8200C and MF8500C use generation 2 protocols. - - Also use has_paper() for generation 2 scanners. - * backend/pixma_imageclass.c, doc/descriptions/pixma.desc: Canon i-SENSYS - MF8200C: ADF supports max. 300DPI. - * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.14 - -2014-11-15 Rolf Bensch - * backend/avision.c: - - Remove firmware checking for HP5370c scanners. Launchpad bug #1080787, - reported by Night Train. - - Build version 297. - -2014-10-29 Rolf Bensch - * backend/pixma_mp150.c, doc/descriptions/pixma.desc, doc/sane-pixma.man: - New Canon scanners MAXIFY MB5000, MB5300, MB2000 and MB2300; - PIXMA MG7500, MG6600, MG5600, MG2900 and E460. All scanners need further - testing. - * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.13 - * doc/descriptions/pixma.desc, doc/sane-pixma.man: - Canon PIXMA MG2900 Series is working, reported by Yannick Dirou. - -2014-10-27 Rolf Bensch - * backend/pixma_mp150.c: Canon PIXMA MG3500 Series doesn't need special - image post processing. - * doc/descriptions/pixma.desc, doc/sane-pixma.man: - Canon PIXMA MG3500 Series is working. - * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.12 - -2014-10-20 Rolf Bensch - * backend/pixma_imageclass.c, doc/descriptions/pixma.desc, - doc/sane-pixma.man: New Scanner Canon imageCLASS D530. - * backend/pixma_mp150.c: - - increase calibration timeout - - calibration can finish with 0x01 or 0x02 - -2014-09-18 Rolf Bensch - * backend/pixma_mp150.c, doc/descriptions/pixma.desc, doc/sane-pixma.man: - Canon Pixma MG5500 Series is working, bug #314819. - -2014-09-16 Rolf Bensch - * doc/descriptions/pixma.desc, doc/sane-pixma.man: Canon Pixma MG2400 Series - is working, reported by Marcus Wellnitz. - * backend/pixma_mp150.c, doc/descriptions/pixma.desc, doc/sane-pixma.man: - Canon Pixma MX530 Series is working, reported by Stephen Weston. - * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.11 - -2014-09-13 Paul Newall

- * backend/kodakaio.c, backend/kodakaio.h: - * Added lineart mode with threshold option. - -2014-09-07 Paul Newall

- * backend/kodakaio.c: - * Fixed error where the colour compensation curves did not have enough - elements and this caused speckles in areas of very low or high colour. - -2014-08-23 Louis Lagendijk - * backend/pixma_bjnp.c: - * Keep TCP-connection closed untill we really need it. This avoids - the scanner closing the TCP-connection when idle - * Add an explicit error message when we detect that the scanner - closed the TCP-connection - -2014-08-16 Rolf Bensch - * backend/pixma_imageclass.c, doc/descriptions/pixma.desc, doc/sane-pixma.man: - New scanners Canon i-SENSYS MF8200C Series and MF8500C Series. MF8500C - Series need further testing. - * doc/sane-pixma.man: add up to now undocumented verbose debug-level - * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.10 - * backend/pixma_mp150.c, doc/descriptions/pixma.desc, doc/sane-pixma.man: - Canon PIXMA MX720 Series scanner is working (bug #314787). - -2014-07-25 Rolf Bensch - * backend/pixma_mp150.c, doc/descriptions/pixma.desc, doc/sane-pixma.man: - New scanners Canon Pixma E400, E560, MX470 and MX530. All scanners need - further testing. - -2014-07-14 m. allan noah - * frontend/scanimage.c: batch-print option and exit value changes - from Jeff Breidenbach jeff@jab.org - -2014-07-01 Stéphane Voltz - * testsuite/sanei/sanei_config_test.c: fix #314694 by exporting a - specific SANE_CONFIG_DIR env dir for tests - -2014-06-29 Stéphane Voltz - * backend/genesys_gl646.c: fix regression in coarse gain calibration - -2014-06-05 Tom Callaway - * lib/snprintf.c: update to newer version from LPRng. The old version is - licensed under the Artistic License 1.0 which isn't compatible with the - GPL and arguably non-free. - -2014-06-02 Stéphane Voltz - * backend/genesys_*.[ch]: add internal ini_scan_regs_api. Add proper - target speed for LiDE 110/210 grey mode motor tables. - -2014-05-29 Paul Newall - * backend/kodakaio.c: change to comment on ./configure parameters - -2014-05-26 Rolf Bensch - * backend/pixma_mp150.c: fix ADF paper empty @ start scanning for Canon - Pixma MP150 based ADF scanners - * backend/pixma_common.c: remove unused variable - * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.9 - -2014-05-08 Rolf Bensch - * backend/pixma_mp150.c: fix MG7100 image data post processing @ high - resolutions > 600dpi. - * doc/descriptions/pixma.desc, doc/sane-pixma.man: Canon Pixma MG7100 - Series scanner is working, reported by Gert Cauwenberg. - * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.8 - -2014-05-13 Stéphane Voltz - * backend/genesys_gl646.[ch] backend/genesys.c backend/genesys_low.c: - fix bug #314663. Set gamma for gl646 devices only at scan time. Reset - endpoint each time before leaving. - -2014-05-08 Rolf Bensch - * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.7 - * backend/pixma_mp150.c: - - all Canon Pixma MP150 based ADF scanners support 14" legal paper size - - fix ADF paper empty bug for Canon Pixma MP150 based ADF scanners - * doc/descriptions/pixma.desc: remove comments for Canon Pixma MP150 based - ADF scanners: adf empty buggy - * doc/sane-pixma.man: Canon Pixma MX360 shouldn't hang anymore (@ ADF paper - empty) - -2014-04-07 Rolf Bensch - * doc/descriptions/pixma.desc, doc/sane-pixma.man: Canon Pixma MX410 - is working, reported from Javier Gorostiza. - -2014-03-21 Rolf Bensch - * doc/descriptions/pixma.desc, doc/sane-pixma.man: Canon Pixma MG3200 - is working, reported in ubuntuforums.org/showthread.php?t=2072162. - * doc/descriptions/pixma.desc: rename WLAN to WiFi - * backend/pixma_mp150.c: - - Canon Pixma MX520 Series supports 14" legal paper size in ADF mode. - - MX520 has button support. - * backend/pixma_common.c: Clamp minimum image size to 16 px x 16 px. Some - new scanners need minimum 16 px height. - * doc/descriptions/pixma.desc, doc/sane-pixma.man: Canon Pixma MX520 Series - is working, reported by Trygve Flathen. - -2014-02-28 Rolf Bensch - * backend/pixma_imageclass.c, doc/descriptions/pixma.desc, - doc/sane-pixma.man: Rename Canon i-SENSYS MF4550d to Canon i-SENSYS MF4500 - Series. This fixes ethernet problems. Patch from chrysn. - -2014-02-24 Stéphane Voltz - * doc/sane-genesys.man backend/genesys.[ch]: - avoid calibration file name collision in case of several identical - scanners - -2014-02-10 Louis Lagendijk - * backend/pixma_bjnp.c backend/pixma_bjnp.h backend/pixma_bjnp_private.h: - - Added support for Canon laser multi-functionals using the MFNP protocol over port 8610 - - Improved debug-logging to be more readable - -2014-02-08 Rolf Bensch - * backend/pixma_mp150.c: - - Canon Pixma MX510 Series supports 14" legal paper size in ADF mode. - * doc/descriptions/pixma.desc, doc/sane-pixma.man: - - Canon Pixma MX510 Series is working, reported by sebastien_gd. - -2014-01-29 m. allan noah - * backend/umax-uc630.c: updates from Ondrej Zary - -2014-01-21 Stéphane Voltz - * doc/descriptions/unsupported.desc doc/descriptions/genesys.desc: - update status of the HP Scanjet 4850C - -2014-01-17 Rolf Bensch - * doc/descriptions/pixma.desc: Update specification file for - Canon i-SENSYS MF4800 Series: - - Ethernet is buggy. - - ADF is working. - -2014-01-09 Gerhard Jaeger - * tools/sane-find-scanner.c tools/check-usb-chip.c: Add LM983x usb - chip detection when compiled for libusb-1.0. - -2014-01-02 Rolf Bensch - * doc/descriptions/pixma.desc: ADF is working for Canon i-SENSYS MF4800 - Series, reported by Yvan L. Gélinas. - -2014-01-02 Rolf Bensch - * backend/pixma.[ch], backend/pixma_common.[ch], backend/pixma_imageclass.c, - backend/pixma_io_sanei.c, backend/pixma_mp150.c, backend/pixma_mp7[35]0.c, - backend/pixma_mp810.c: update copyright. - * backend/pixma_imageclass.c, doc/descriptions/pixma.desc, - doc/sane-pixma.man: bug #314411, Canon imageCLASS MF4570dw is working. - -2013-12-27 Rolf Bensch - * backend/pixma_imageclass.c, doc/descriptions/pixma.desc, - doc/sane-pixma.man: - - Canon i-SENSYS MF4800 Series has ADF and supports 14" legal paper size - in ADF mode. - - Canon i-SENSYS MF4800 Series is working, reported by Yvan L. Gélinas. - -2013-12-23 Rolf Bensch - * backend/pixma_common.c: fix usb cmd transaction timeout - -2013-12-23 Stéphane Voltz - * backend/genesys_devices.c backend/genesys.c backend/genesys_low.h - backend/genesys_gl841.[ch]: color calibration improvement for LiDE80, - working LEDADD for gl841 CIS scanners - -2013-12-16 Rolf Bensch - * backend/pixma_imageclass.c, doc/descriptions/pixma.desc, - doc/sane-pixma.man: - - rename Canon imageCLASS MF4770n to i-SENSYS MF4700 Series - - rename Canon i-SENSYS MF4890dw to MF4800 Series - * backend/pixma_mp150.c, doc/descriptions/pixma.desc, doc/sane-pixma.man: - - Canon MX920 reported as working; ADF is still buggy - - MX920 has 14" ADF paper length - - MX920 has button support - - fix vertical stripe shifting for MX920 - - tidy function calc_shifting() - * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.6 - -2013-12-16 Stéphane Voltz - * doc/descriptions/genesys.desc: update LiDE 80 - * backend/genesys_devices.c backend/genesys.c backend/genesys_low.h - backend/genesys_gl841.[ch]: basic support for LiDE 80 - -2013-12-10 m. allan noah - * backend/fujitsu*: fujitsu backend v118 - - support fi-7160, fi-7260, fi-7180 and fi-7280 - - remove unused var from do_scsi_cmd() - - added more request_sense options - - add adv_paper_protect option - - enable paper protection by default - - increase max_x_fb for fi-6240 and fi-6230 - -2013-12-09 m. allan noah - * backend/canon_dr*: canon_dr backend v42 - - initial DR-G1100 support - - add support for paper sensors (P-215 & P-208) - - add initial support for card reader (P-215) - - removed unused var from do_scsi_cmd() - -2013-11-21 Stéphane Voltz - * testsuite/tools/Makefile.*: handle sane git version change in tests. - -2013-10-19 Stéphane Voltz - * doc/descriptions/genesys.desc doc/Descriptions/unsupported.desc: - update LiDE 80 and HP2400 information - * backend/genesys_devices.c backend/genesys.conf.in backend/genesys.c - backend/genesys_low.h backend/genesys_gl841.[ch]: add first element of - LiDE 80 support. - -2013-10-15 Paul Newall - * configure.in: detection of cups was commented out. Avahi is now used - for autodetection in kodakaio so the detection of cups is no longer required. - -2013-10-14 Paul Newall - * backend/kodakaio.c: fix bug #314301, - Segfault when unexpected data returned by avahi auto discovery. - -2013-10-11 Rolf Bensch - * backend/pixma_imageclass.c: Use generation variable instead of single - defines of scanner pid's. Now new scanners should work without extensive - code editing. - * backend/pixma_imageclass.c, doc/descriptions/pixma.desc, - doc/sane-pixma.man: New scanner Canon i-SENSYS MF4890dw. This scanner needs - further testing. - * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.5 - -2013-10-02 Rolf Bensch - * README.linux: Update Installation description for 1.0.25git. - -2013-09-30 m. allan noah - * ChangeLog*, configure*, doc/releases.txt: - Various updates related to starting 1.0.25git - -Older entries can be found in ChangeLog-1.0.24. +Older entries can be found in ChangeLog-1.0.25. diff --git a/ChangeLog-1.0.25 b/ChangeLog-1.0.25 new file mode 100644 index 000000000..06efddbbd --- /dev/null +++ b/ChangeLog-1.0.25 @@ -0,0 +1,507 @@ +****** Release of sane-backends 1.0.25. End of code freeze ****** + +2015-09-30 Rolf Bensch + * doc/descriptions/pixma.desc, doc/sane-pixma.man: + Canon PIXMA MG5600 Series is working, reported by Gavin Falconer. + +2015-09-26 Rolf Bensch + * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.23 + +2015-06-22 Louis Lagendijk + * doc/saned.man: updated to clarify systemd integration and + configuration for thecase where saned is compiled with systemd + glue. + +2015-09-18 Rolf Bensch + * backend/pixma_imageclass.c: for all adf scanners restrict maximum page + height at flatbed scans + +2015-09-16 Stéphane Voltz + * backend/niash.c: merged pu/protect-niash-option-access-315132 and + ifdef'ed unused code + +2015-09-16 Stéphane Voltz + * backend/pieusb.c: include sane/config.h first + +2015-09-14 Stéphane Voltz + * backend/bh.c: replace mktemp by mkstemp #300134 + +2015-09-13 Paul Newall

+ * backend/kodakaio.c: + redundant variable bitposn and redundant function kodakaio_rxflush + commented out. + +2015-09-09 Stéphane Voltz + * doc/sane-genesys.man, doc/descriptions/genesys.desc: No LiDE 120 + support. + +2015-09-08 m. allan noah + * backend/artec_eplus48u.c: fix HOME env bug #315071 (from Jörg Frings-Fürst) + +2015-09-03 Rolf Bensch + * backend/pixma_mp810.c: Canon Pixma MP990 needs specific reordering pixels + for 4800 dpi, patch from Guillaume Courtois. + * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.22 + +2015-08-20 Rolf Bensch + * README.linux: add mandatory and optional development environment to + install description + * frontend/scanimage.c: remove atexit() function. In some cases atexit() + doesn't work with libusb-compat. + +2015-08-10 Rolf Bensch + * backend/pixma_io_sanei.c: EOF is a bjnp timeout error. + * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.21 + +2015-08-10 Stéphane Voltz + * backend/abaton.c, backend/agfafocus.c, backend/apple.c, + backend/bh.c, backend/coolscan.c, backend/dmc.c, backend/ricoh.c, + backend/s9036.c, backend/sp15c.[ch], backend/tamarack.c: + fix for memleak in sane_get_devices (bugs #300132 #300131 #300130 #300129 + #300127 #300126 #300124 #300122 #300121 #300120) + +2015-08-10 Klaus Kämpf + * backend/pieusb.c, doc/descriptions/pieusb.desc, doc/sane-pieusb.man, + backend/pieusb_buffer.c, backend/pieusb_scancmd.c, backend/pieusb_specific.c, + backend/pieusb_usb.c: + New scanners PIE PowerSlide 3600,3650,4000,5000 / Reflecta DigitDia 3600, + 4000, 5000, 6000; ProScan 7200; CrystalScan 7200. These scanners need + further testing. + +2015-08-08 Stéphane Voltz + * backend/test.c: fix memleaks (#313553) + * configure.in, configure: don not harcode -I/usr/local/include + (#315060) + + open/close tests. +2015-08-07 Rolf Bensch + * README.linux: update development packages list. OpenSuse needs + libusb-compat-devel. Sane doesn't support libusb 1.0. + * backend/pixma_io_sanei.c: EOF isn't an usb timeout error; this fixes usb + communication problems, e.g. with OpenSuse. + * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.20 + +2015-08-06 Stéphane Voltz + * backend/genesys_devices.c, backend/genesys_gl841.c, backend/genesys_low.c: + fix GPIO setup for LiDE 33/40/50, add more usleep() for GL847 + scanning issues. Some GL841 LEDADD improvements. + +2015-07-31 Stéphane Voltz + * frontend/tstbackend.c: add an option to do tests scans during + open/close tests. + * backend/genesys.c, backend/genesys_low.c: fixes for + - #315104 + - #315105 + And a timing issue on USB3 hardware debugged and tracked by John S. + Weber + +2015-07-29 Rolf Bensch + * backend/pixma_mp150.c, doc/descriptions/pixma.desc, doc/sane-pixma.man: + New scanner Canon PIXMA MG3600 Series. This scanner needs further testing. + * backend/pixma_mp150.c: Canon PIXMA MG7500 Series doesn't need special + image format post processing. + * doc/descriptions/pixma.desc, doc/sane-pixma.man: + Canon PIXMA MG7500 Series is working, reported by Jonathan Anderson. + * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.19 + +2015-07-24 Rolf Bensch + * doc/descriptions/pixma.desc, doc/sane-pixma.man: + Canon PIXMA MX470 Series is working, bug #314894. + +2015-06-27 Louis Lagendijk + * backend/pixma_bjnp.c: added missing return in case of no error + +2015-06-27 Louis Lagendijk + * backend/pixma_bjnp.c Added backend version in bjnp debug output + +2015-06-11 Stéphane Voltz + * backend/genesys.c backend/genesys_gl124.h: LiDE 120 support + improvement. + +2015-05-18 Rolf Bensch + * backend/pixma_imageclass.c, doc/descriptions/pixma.desc, doc/sane-pixma.man: + New scanner Canon i-SENSYS MF8300 Series, reported by Florian Nierhaus. + * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.18 + +2015-04-12 Stéphane Voltz + * doc/sane-genesys.man backend/genesys.[ch] backend/genesys_low.c: + fix calibration cleared when calibration file loaded, + add expiration time option for cache. + +2015-04-07 Rolf Bensch + * backend/pixma_mp810.c: Canon Pixma MP990 TPU scan patch from Guillaume + Courtois. + * doc/descriptions/pixma.desc: remove unmaintained websites + * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.17 + +2015-04-03 Rolf Bensch + * backend/pixma_imageclass.c, doc/descriptions/pixma.desc, + doc/sane-pixma.man: New Canon scanners i-SENSYS MF210 Series, MF220 Series, + MF5900 Series, MF6100 Series and imageCLASS MF810/820. All scanners need + further testing. + * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.16 + * backend/pixma.[ch], backend/pixma_common.[ch], backend/pixma_imageclass.c, + backend/pixma_io_sanei.c, backend/pixma_mp150.c, backend/pixma_mp7[35]0.c, + backend/pixma_mp810.c: update copyright. + +2015-03-17 Stéphane Voltz + * backend/genesys.c, backend/genesys.conf.in, + backend/genesys_devices.c, backend/genesys_gl124.c, + backend/genesys_gl124.h, backend/genesys_low.h, + doc/descriptions/genesys.desc, doc/sane-genesys.man: add support for + Canon LiDE 120 + +2015-03-14 René Rebe + * backend/avision.h backend/avision.c: + fixed 32-bit build regression due new feature_type and + reverted 4d38523bdacd18186857ee8a93daaa0f8721c89b + +2015-03-13 René Rebe + * doc/sane-avision.man, backend/avision.h, backend/avision.c: + fixed newer avision scanner duplex scanning, and removed unnecessary + feature_type2 clutter by using a uint64_t to share all bits + +2015-03-12 René Rebe + * doc/descriptions/avision.desc, backend/avision.c: + fixed multiple regressions (range initilaizer, clobbering + paper-length window bits, ...) introduced over the past years, added + support for newer ASIC gamma table size, added AV220D2+ ID +2015-03-04 Stéphane Voltz + * doc/descriptions/genesys.desc: mark LiDE 120 as unsupported. + +2015-03-02 Stéphane Voltz + * backend/genesys_low.c, backend/genesys_gl124.[ch]: + improve parking reliability for LiDE 210 + +2015-03-01 Stéphane Voltz + * backend/genesys_devices.c, backend/genesys_gl124.c: + final tuning for Canon LiDE 220 + +2015-02-26 Stéphane Voltz + * backend/genesys.c, backend/genesys.conf.in, + backend/genesys_devices.c, backend/genesys_gl124.c, + backend/genesys_gl124.h, backend/genesys_low.h, + doc/descriptions/genesys.desc, doc/sane-genesys.man: add support for + Canon LiDE 220 + +2015-02-21 Rolf Bensch + * backend/pixma_mp150.c: Canon PIXMA MG6400 Series doesn't need special + image format post processing. + * doc/descriptions/pixma.desc, doc/sane-pixma.man: + Canon PIXMA MG6400 Series is working, reported by Christian Spielberger. + * backend/pixma_mp150.c, doc/descriptions/pixma.desc, doc/sane-pixma.man: + New scanners Canon PIXMA MX490 Series and E480 Series. All scanners need + further testing. + * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.15 + +2015-02-09 Rolf Bensch + * doc/descriptions/pixma.desc: Canon PIXMA MX920 Series supports Ethernet + and WiFi interfaces. + +2015-02-06 Rolf Bensch + * doc/descriptions/pixma.desc, doc/sane-pixma.man: + Canon PIXMA MG2500 Series is working, reported by Brenda Ruch. + +2015-01-20 Ilia Sotnikov + * backend/hp5590.c: + Invert pixels in case of TMA Negatives source has been selected. + Thanks for Will Kranz who reported this. + +2015-01-17 Rolf Bensch + * doc/descriptions/pixma.desc, doc/sane-pixma.man: + Canon PIXMA MG2200 Series is working (bug #314944). + +2014-12-31 Paul Newall

+ * backend/kodakaio.c: + connection to device moved from sane_open to sane_start + disconnection move from sane_close to sane_cancel + in order to fix bug where scanner disconnected after 30s idle. + +2014-12-19 Paul Newall

+ * backend/kodakaio.c: + param.depth corrected for lineart mode, was 8 now 1 + sequence of modes changed to make the color mode the default. + +2014-12-16 m. allan noah + * sanei/sanei_usb.c: add calls to sanei_usb_set_altinterface in + sanei_usb_close and sanei_usb_clear_halt- hopefully work around + USB3/xhci problems in Linux. + +2014-11-18 Rolf Bensch + * backend/pixma_imageclass.c: + - Canon i-SENSYS MF8200C and MF8500C use generation 2 protocols. + - Also use has_paper() for generation 2 scanners. + * backend/pixma_imageclass.c, doc/descriptions/pixma.desc: Canon i-SENSYS + MF8200C: ADF supports max. 300DPI. + * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.14 + +2014-11-15 Rolf Bensch + * backend/avision.c: + - Remove firmware checking for HP5370c scanners. Launchpad bug #1080787, + reported by Night Train. + - Build version 297. + +2014-10-29 Rolf Bensch + * backend/pixma_mp150.c, doc/descriptions/pixma.desc, doc/sane-pixma.man: + New Canon scanners MAXIFY MB5000, MB5300, MB2000 and MB2300; + PIXMA MG7500, MG6600, MG5600, MG2900 and E460. All scanners need further + testing. + * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.13 + * doc/descriptions/pixma.desc, doc/sane-pixma.man: + Canon PIXMA MG2900 Series is working, reported by Yannick Dirou. + +2014-10-27 Rolf Bensch + * backend/pixma_mp150.c: Canon PIXMA MG3500 Series doesn't need special + image post processing. + * doc/descriptions/pixma.desc, doc/sane-pixma.man: + Canon PIXMA MG3500 Series is working. + * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.12 + +2014-10-20 Rolf Bensch + * backend/pixma_imageclass.c, doc/descriptions/pixma.desc, + doc/sane-pixma.man: New Scanner Canon imageCLASS D530. + * backend/pixma_mp150.c: + - increase calibration timeout + - calibration can finish with 0x01 or 0x02 + +2014-09-18 Rolf Bensch + * backend/pixma_mp150.c, doc/descriptions/pixma.desc, doc/sane-pixma.man: + Canon Pixma MG5500 Series is working, bug #314819. + +2014-09-16 Rolf Bensch + * doc/descriptions/pixma.desc, doc/sane-pixma.man: Canon Pixma MG2400 Series + is working, reported by Marcus Wellnitz. + * backend/pixma_mp150.c, doc/descriptions/pixma.desc, doc/sane-pixma.man: + Canon Pixma MX530 Series is working, reported by Stephen Weston. + * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.11 + +2014-09-13 Paul Newall

+ * backend/kodakaio.c, backend/kodakaio.h: + * Added lineart mode with threshold option. + +2014-09-07 Paul Newall

+ * backend/kodakaio.c: + * Fixed error where the colour compensation curves did not have enough + elements and this caused speckles in areas of very low or high colour. + +2014-08-23 Louis Lagendijk + * backend/pixma_bjnp.c: + * Keep TCP-connection closed untill we really need it. This avoids + the scanner closing the TCP-connection when idle + * Add an explicit error message when we detect that the scanner + closed the TCP-connection + +2014-08-16 Rolf Bensch + * backend/pixma_imageclass.c, doc/descriptions/pixma.desc, doc/sane-pixma.man: + New scanners Canon i-SENSYS MF8200C Series and MF8500C Series. MF8500C + Series need further testing. + * doc/sane-pixma.man: add up to now undocumented verbose debug-level + * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.10 + * backend/pixma_mp150.c, doc/descriptions/pixma.desc, doc/sane-pixma.man: + Canon PIXMA MX720 Series scanner is working (bug #314787). + +2014-07-25 Rolf Bensch + * backend/pixma_mp150.c, doc/descriptions/pixma.desc, doc/sane-pixma.man: + New scanners Canon Pixma E400, E560, MX470 and MX530. All scanners need + further testing. + +2014-07-14 m. allan noah + * frontend/scanimage.c: batch-print option and exit value changes + from Jeff Breidenbach jeff@jab.org + +2014-07-01 Stéphane Voltz + * testsuite/sanei/sanei_config_test.c: fix #314694 by exporting a + specific SANE_CONFIG_DIR env dir for tests + +2014-06-29 Stéphane Voltz + * backend/genesys_gl646.c: fix regression in coarse gain calibration + +2014-06-05 Tom Callaway + * lib/snprintf.c: update to newer version from LPRng. The old version is + licensed under the Artistic License 1.0 which isn't compatible with the + GPL and arguably non-free. + +2014-06-02 Stéphane Voltz + * backend/genesys_*.[ch]: add internal ini_scan_regs_api. Add proper + target speed for LiDE 110/210 grey mode motor tables. + +2014-05-29 Paul Newall + * backend/kodakaio.c: change to comment on ./configure parameters + +2014-05-26 Rolf Bensch + * backend/pixma_mp150.c: fix ADF paper empty @ start scanning for Canon + Pixma MP150 based ADF scanners + * backend/pixma_common.c: remove unused variable + * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.9 + +2014-05-08 Rolf Bensch + * backend/pixma_mp150.c: fix MG7100 image data post processing @ high + resolutions > 600dpi. + * doc/descriptions/pixma.desc, doc/sane-pixma.man: Canon Pixma MG7100 + Series scanner is working, reported by Gert Cauwenberg. + * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.8 + +2014-05-13 Stéphane Voltz + * backend/genesys_gl646.[ch] backend/genesys.c backend/genesys_low.c: + fix bug #314663. Set gamma for gl646 devices only at scan time. Reset + endpoint each time before leaving. + +2014-05-08 Rolf Bensch + * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.7 + * backend/pixma_mp150.c: + - all Canon Pixma MP150 based ADF scanners support 14" legal paper size + - fix ADF paper empty bug for Canon Pixma MP150 based ADF scanners + * doc/descriptions/pixma.desc: remove comments for Canon Pixma MP150 based + ADF scanners: adf empty buggy + * doc/sane-pixma.man: Canon Pixma MX360 shouldn't hang anymore (@ ADF paper + empty) + +2014-04-07 Rolf Bensch + * doc/descriptions/pixma.desc, doc/sane-pixma.man: Canon Pixma MX410 + is working, reported from Javier Gorostiza. + +2014-03-21 Rolf Bensch + * doc/descriptions/pixma.desc, doc/sane-pixma.man: Canon Pixma MG3200 + is working, reported in ubuntuforums.org/showthread.php?t=2072162. + * doc/descriptions/pixma.desc: rename WLAN to WiFi + * backend/pixma_mp150.c: + - Canon Pixma MX520 Series supports 14" legal paper size in ADF mode. + - MX520 has button support. + * backend/pixma_common.c: Clamp minimum image size to 16 px x 16 px. Some + new scanners need minimum 16 px height. + * doc/descriptions/pixma.desc, doc/sane-pixma.man: Canon Pixma MX520 Series + is working, reported by Trygve Flathen. + +2014-02-28 Rolf Bensch + * backend/pixma_imageclass.c, doc/descriptions/pixma.desc, + doc/sane-pixma.man: Rename Canon i-SENSYS MF4550d to Canon i-SENSYS MF4500 + Series. This fixes ethernet problems. Patch from chrysn. + +2014-02-24 Stéphane Voltz + * doc/sane-genesys.man backend/genesys.[ch]: + avoid calibration file name collision in case of several identical + scanners + +2014-02-10 Louis Lagendijk + * backend/pixma_bjnp.c backend/pixma_bjnp.h backend/pixma_bjnp_private.h: + - Added support for Canon laser multi-functionals using the MFNP protocol over port 8610 + - Improved debug-logging to be more readable + +2014-02-08 Rolf Bensch + * backend/pixma_mp150.c: + - Canon Pixma MX510 Series supports 14" legal paper size in ADF mode. + * doc/descriptions/pixma.desc, doc/sane-pixma.man: + - Canon Pixma MX510 Series is working, reported by sebastien_gd. + +2014-01-29 m. allan noah + * backend/umax-uc630.c: updates from Ondrej Zary + +2014-01-21 Stéphane Voltz + * doc/descriptions/unsupported.desc doc/descriptions/genesys.desc: + update status of the HP Scanjet 4850C + +2014-01-17 Rolf Bensch + * doc/descriptions/pixma.desc: Update specification file for + Canon i-SENSYS MF4800 Series: + - Ethernet is buggy. + - ADF is working. + +2014-01-09 Gerhard Jaeger + * tools/sane-find-scanner.c tools/check-usb-chip.c: Add LM983x usb + chip detection when compiled for libusb-1.0. + +2014-01-02 Rolf Bensch + * doc/descriptions/pixma.desc: ADF is working for Canon i-SENSYS MF4800 + Series, reported by Yvan L. Gélinas. + +2014-01-02 Rolf Bensch + * backend/pixma.[ch], backend/pixma_common.[ch], backend/pixma_imageclass.c, + backend/pixma_io_sanei.c, backend/pixma_mp150.c, backend/pixma_mp7[35]0.c, + backend/pixma_mp810.c: update copyright. + * backend/pixma_imageclass.c, doc/descriptions/pixma.desc, + doc/sane-pixma.man: bug #314411, Canon imageCLASS MF4570dw is working. + +2013-12-27 Rolf Bensch + * backend/pixma_imageclass.c, doc/descriptions/pixma.desc, + doc/sane-pixma.man: + - Canon i-SENSYS MF4800 Series has ADF and supports 14" legal paper size + in ADF mode. + - Canon i-SENSYS MF4800 Series is working, reported by Yvan L. Gélinas. + +2013-12-23 Rolf Bensch + * backend/pixma_common.c: fix usb cmd transaction timeout + +2013-12-23 Stéphane Voltz + * backend/genesys_devices.c backend/genesys.c backend/genesys_low.h + backend/genesys_gl841.[ch]: color calibration improvement for LiDE80, + working LEDADD for gl841 CIS scanners + +2013-12-16 Rolf Bensch + * backend/pixma_imageclass.c, doc/descriptions/pixma.desc, + doc/sane-pixma.man: + - rename Canon imageCLASS MF4770n to i-SENSYS MF4700 Series + - rename Canon i-SENSYS MF4890dw to MF4800 Series + * backend/pixma_mp150.c, doc/descriptions/pixma.desc, doc/sane-pixma.man: + - Canon MX920 reported as working; ADF is still buggy + - MX920 has 14" ADF paper length + - MX920 has button support + - fix vertical stripe shifting for MX920 + - tidy function calc_shifting() + * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.6 + +2013-12-16 Stéphane Voltz + * doc/descriptions/genesys.desc: update LiDE 80 + * backend/genesys_devices.c backend/genesys.c backend/genesys_low.h + backend/genesys_gl841.[ch]: basic support for LiDE 80 + +2013-12-10 m. allan noah + * backend/fujitsu*: fujitsu backend v118 + - support fi-7160, fi-7260, fi-7180 and fi-7280 + - remove unused var from do_scsi_cmd() + - added more request_sense options + - add adv_paper_protect option + - enable paper protection by default + - increase max_x_fb for fi-6240 and fi-6230 + +2013-12-09 m. allan noah + * backend/canon_dr*: canon_dr backend v42 + - initial DR-G1100 support + - add support for paper sensors (P-215 & P-208) + - add initial support for card reader (P-215) + - removed unused var from do_scsi_cmd() + +2013-11-21 Stéphane Voltz + * testsuite/tools/Makefile.*: handle sane git version change in tests. + +2013-10-19 Stéphane Voltz + * doc/descriptions/genesys.desc doc/Descriptions/unsupported.desc: + update LiDE 80 and HP2400 information + * backend/genesys_devices.c backend/genesys.conf.in backend/genesys.c + backend/genesys_low.h backend/genesys_gl841.[ch]: add first element of + LiDE 80 support. + +2013-10-15 Paul Newall + * configure.in: detection of cups was commented out. Avahi is now used + for autodetection in kodakaio so the detection of cups is no longer required. + +2013-10-14 Paul Newall + * backend/kodakaio.c: fix bug #314301, + Segfault when unexpected data returned by avahi auto discovery. + +2013-10-11 Rolf Bensch + * backend/pixma_imageclass.c: Use generation variable instead of single + defines of scanner pid's. Now new scanners should work without extensive + code editing. + * backend/pixma_imageclass.c, doc/descriptions/pixma.desc, + doc/sane-pixma.man: New scanner Canon i-SENSYS MF4890dw. This scanner needs + further testing. + * backend/pixma.h, doc/descriptions/pixma.desc: Pixma backend version 0.17.5 + +2013-10-02 Rolf Bensch + * README.linux: Update Installation description for 1.0.25git. + +2013-09-30 m. allan noah + * ChangeLog*, configure*, doc/releases.txt: + Various updates related to starting 1.0.25git + +Older entries can be found in ChangeLog-1.0.24. diff --git a/Makefile.am b/Makefile.am index a638eec55..3546ae7d6 100644 --- a/Makefile.am +++ b/Makefile.am @@ -18,6 +18,7 @@ EXTRA_DIST = ChangeLog-1.0.0 ChangeLog-1.0.1 ChangeLog-1.0.2 \ ChangeLog-1.0.12 ChangeLog-1.0.13 ChangeLog-1.0.14 ChangeLog-1.0.15 \ ChangeLog-1.0.16 ChangeLog-1.0.17 ChangeLog-1.0.18 ChangeLog-1.0.19 \ ChangeLog-1.0.20 ChangeLog-1.0.21 ChangeLog-1.0.22 ChangeLog-1.0.23 \ + ChangeLog-1.0.24 ChangeLog-1.0.25 \ $(PACKAGE).lsm # diff --git a/Makefile.in b/Makefile.in index 141a15fe3..4cf680a63 100644 --- a/Makefile.in +++ b/Makefile.in @@ -414,6 +414,7 @@ EXTRA_DIST = ChangeLog-1.0.0 ChangeLog-1.0.1 ChangeLog-1.0.2 \ ChangeLog-1.0.12 ChangeLog-1.0.13 ChangeLog-1.0.14 ChangeLog-1.0.15 \ ChangeLog-1.0.16 ChangeLog-1.0.17 ChangeLog-1.0.18 ChangeLog-1.0.19 \ ChangeLog-1.0.20 ChangeLog-1.0.21 ChangeLog-1.0.22 ChangeLog-1.0.23 \ + ChangeLog-1.0.24 ChangeLog-1.0.25 \ $(PACKAGE).lsm diff --git a/configure b/configure index 5f58b620c..ee6c661d5 100755 --- a/configure +++ b/configure @@ -1,6 +1,6 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.69 for sane-backends 1.0.25. +# Generated by GNU Autoconf 2.69 for sane-backends 1.0.26git. # # Report bugs to . # @@ -590,8 +590,8 @@ MAKEFLAGS= # Identity of this package. PACKAGE_NAME='sane-backends' PACKAGE_TARNAME='sane-backends' -PACKAGE_VERSION='1.0.25' -PACKAGE_STRING='sane-backends 1.0.25' +PACKAGE_VERSION='1.0.26git' +PACKAGE_STRING='sane-backends 1.0.26git' PACKAGE_BUGREPORT='sane-devel@lists.alioth.debian.org' PACKAGE_URL='' @@ -1423,7 +1423,7 @@ if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures sane-backends 1.0.25 to adapt to many kinds of systems. +\`configure' configures sane-backends 1.0.26git to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1493,7 +1493,7 @@ fi if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of sane-backends 1.0.25:";; + short | recursive ) echo "Configuration of sane-backends 1.0.26git:";; esac cat <<\_ACEOF @@ -1657,7 +1657,7 @@ fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -sane-backends configure 1.0.25 +sane-backends configure 1.0.26git generated by GNU Autoconf 2.69 Copyright (C) 2012 Free Software Foundation, Inc. @@ -2263,7 +2263,7 @@ cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by sane-backends $as_me 1.0.25, which was +It was created by sane-backends $as_me 1.0.26git, which was generated by GNU Autoconf 2.69. Invocation command line was $ $0 $@ @@ -2616,8 +2616,8 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu V_MAJOR=1 V_MINOR=0 -V_REV=25 -is_release=yes +V_REV=26 +is_release=no @@ -3136,7 +3136,7 @@ fi # Define the identity of the package. PACKAGE='sane-backends' - VERSION='1.0.25' + VERSION='1.0.26git' cat >>confdefs.h <<_ACEOF @@ -3256,7 +3256,7 @@ ac_config_headers="$ac_config_headers include/sane/config.h" PACKAGE=sane-backends -VERSION=1.0.25 +VERSION=1.0.26git NUMBER_VERSION=${V_MAJOR}.${V_MINOR}.${V_REV} cat >>confdefs.h <<_ACEOF @@ -19062,7 +19062,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by sane-backends $as_me 1.0.25, which was +This file was extended by sane-backends $as_me 1.0.26git, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES @@ -19128,7 +19128,7 @@ _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ -sane-backends config.status 1.0.25 +sane-backends config.status 1.0.26git configured by $0, generated by GNU Autoconf 2.69, with options \\"\$ac_cs_config\\" diff --git a/configure.in b/configure.in index 96a52e5cb..6dcc00b91 100644 --- a/configure.in +++ b/configure.in @@ -3,11 +3,11 @@ dnl Process this file with autoconf to produce a configure script. -*-m4-*- dnl *********************************************************************** dnl When preparing a release, increase the numeric and string version numbers, dnl remove the "cvs" suffix, and set is_release=yes -AC_INIT([sane-backends],[1.0.25],[sane-devel@lists.alioth.debian.org]) +AC_INIT([sane-backends],[1.0.26git],[sane-devel@lists.alioth.debian.org]) V_MAJOR=1 V_MINOR=0 -V_REV=25 -is_release=yes +V_REV=26 +is_release=no dnl *********************************************************************** m4_ifdef([AC_CONFIG_MACRO_DIR], [AC_CONFIG_MACRO_DIR([m4])]) diff --git a/doc/descriptions/epsonds.desc b/doc/descriptions/epsonds.desc index 0b7c6c643..7da54e127 100644 --- a/doc/descriptions/epsonds.desc +++ b/doc/descriptions/epsonds.desc @@ -7,7 +7,7 @@ :backend "epsonds" :version "1.0.18" -:new :yes +:new :no :manpage "sane-epsonds" :devicetype :scanner diff --git a/doc/descriptions/pieusb.desc b/doc/descriptions/pieusb.desc index 102cd4518..1b6d19cf3 100644 --- a/doc/descriptions/pieusb.desc +++ b/doc/descriptions/pieusb.desc @@ -11,7 +11,7 @@ :backend "pieusb" ; name of backend :version "1.0" ; version of backend -:new :yes +:new :no :manpage "sane-pieusb" ; name of manpage (if it exists) :url "https://github.com/kkaempf/sane-backends" ; backend's web page