diff --git a/src/main/target/FREEAXISF4/target.c b/src/main/target/FREEAXISF4/target.c
new file mode 100644
index 0000000000..125a3032c2
--- /dev/null
+++ b/src/main/target/FREEAXISF4/target.c
@@ -0,0 +1,45 @@
+/*
+ * This file is part of EmuFlight. It is derived from Betaflight.
+ *
+ * This is free software. You can redistribute this software
+ * and/or modify this software under the terms of the GNU General
+ * Public License as published by the Free Software Foundation,
+ * either version 3 of the License, or (at your option) any later
+ * version.
+ *
+ * This software is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this software.
+ *
+ * If not, see .
+ */
+
+// This resource file generated using https://github.com/nerdCopter/target-convert
+// Commit: 3f33ae6 + 1 file changed, 24 deletions(-)
+
+#include
+#include "platform.h"
+#include "drivers/io.h"
+#include "drivers/dma.h"
+#include "drivers/timer.h"
+#include "drivers/timer_def.h"
+
+const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = {
+ DEF_TIM(TIM3, CH1, PB4, TIM_USE_MOTOR, 0, 0), // motor 1
+ DEF_TIM(TIM3, CH2, PB5, TIM_USE_MOTOR, 0, 0), // motor 2
+ DEF_TIM(TIM4, CH1, PB6, TIM_USE_MOTOR, 0, 0), // motor 3
+ DEF_TIM(TIM4, CH2, PB7, TIM_USE_MOTOR, 0, 0), // motor 4
+ DEF_TIM(TIM2, CH2, PB3, TIM_USE_MOTOR, 0, 0), // motor 5
+ DEF_TIM(TIM2, CH3, PB10, TIM_USE_MOTOR, 0, 0), // motor 6
+ DEF_TIM(TIM9, CH2, PA3, TIM_USE_PPM, 0, 0), // ppm ; dma 0 assumed, please verify
+ DEF_TIM(TIM5, CH1, PA0, TIM_USE_ANY, 0, 0), // could not determine TIM_USE_xxxxx - please check
+ DEF_TIM(TIM5, CH3, PA2, TIM_USE_ANY, 0, 0), // could not determine TIM_USE_xxxxx - please check
+ DEF_TIM(TIM1, CH1, PA8, TIM_USE_LED, 0, 0), // led
+};
+
+// notice - this file was programmatically generated and may be incomplete.
diff --git a/src/main/target/FREEAXISF4/target.h b/src/main/target/FREEAXISF4/target.h
new file mode 100644
index 0000000000..2819bd27ee
--- /dev/null
+++ b/src/main/target/FREEAXISF4/target.h
@@ -0,0 +1,115 @@
+/*
+ * This file is part of EmuFlight. It is derived from Betaflight.
+ *
+ * This is free software. You can redistribute this software
+ * and/or modify this software under the terms of the GNU General
+ * Public License as published by the Free Software Foundation,
+ * either version 3 of the License, or (at your option) any later
+ * version.
+ * This software is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ * You should have received a copy of the GNU General Public
+ * License along with this software.
+ * If not, see .
+ */
+
+// This resource file generated using https://github.com/nerdCopter/target-convert
+// Commit: 3f33ae6 + 1 file changed, 24 deletions(-)
+
+#pragma once
+
+#define BOARD_NAME FREEAXISF4
+#define MANUFACTURER_ID CLNE
+#define TARGET_BOARD_IDENTIFIER "S411" // generic ID
+#define FC_TARGET_MCU STM32F411 // not used in EmuF
+
+#define USE_ACC
+#define USE_GYRO
+#define USE_ACCGYRO_BMI270
+#define USE_FLASH
+#define USE_FLASH_W25N01G
+#define USE_MAX7456
+
+#define USE_VCP
+#define USE_FLASHFS
+#define USE_FLASH_M25P16 // 16MB Micron M25P16 driver; drives all unless QSPI
+#define USE_OSD
+
+#define USE_LED
+#define LED0_PIN PC13
+#define LED1_PIN PC14
+#define LED_STRIP_PIN PA8
+#define USE_BEEPER
+#define BEEPER_PIN PB2
+#define BEEPER_INVERTED
+#define USE_USB_DETECT
+
+#define USE_SPI
+#define USE_SPI_DEVICE_1
+#define SPI1_SCK_PIN PA5
+#define SPI1_MISO_PIN PA6
+#define SPI1_MOSI_PIN PA7
+#define USE_SPI_DEVICE_2
+#define SPI2_SCK_PIN PB13
+#define SPI2_MISO_PIN PB14
+#define SPI2_MOSI_PIN PB15
+
+#define USE_EXTI
+#define USE_GYRO_EXTI
+
+#define GYRO_1_EXTI_PIN PA1
+#define ACC_BMI270_ALIGN CW180_DEG
+#define GYRO_BMI270_ALIGN CW180_DEG
+#define BMI270_CS_PIN PA4
+#define BMI270_SPI_INSTANCE SPI1
+
+#define USE_UART1
+#define UART1_TX_PIN PA9
+#define UART1_RX_PIN PA10
+#define USE_UART2
+#define UART2_TX_PIN PA2
+#define UART2_RX_PIN PA3
+#define USE_SOFTSERIAL1
+#define SOFTSERIAL1_TX_PIN PA0
+#define SOFTSERIAL1_RX_PIN PA0
+#define SERIAL_PORT_COUNT 4
+
+#define USE_I2C
+#define USE_I2C_DEVICE_1
+#define I2C_DEVICE_1 (I2CDEV_1)
+#define MAG_I2C_INSTANCE (I2CDEV_1)
+#define I2C1_SCL PB8
+#define I2C1_SDA PB9
+
+#define FLASH_CS_PIN PA15
+#define FLASH_SPI_INSTANCE SPI2
+#define ENABLE_BLACKBOX_LOGGING_ON_SPIFLASH_BY_DEFAULT
+
+#define MAX7456_SPI_CS_PIN PB12
+#define MAX7456_SPI_INSTANCE SPI2
+
+#define USE_ADC
+#define VBAT_ADC_PIN PB0
+#define CURRENT_METER_ADC_PIN PB1
+#define ADC1_DMA_OPT 1
+#define ADC1_DMA_STREAM DMA2_Stream4 //# ADC 1: DMA2 Stream 4 Channel 0
+#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC
+#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC
+
+#define ENABLE_DSHOT_DMAR false
+
+
+#define TARGET_IO_PORTA 0xffff
+#define TARGET_IO_PORTB 0xffff
+#define TARGET_IO_PORTC 0xffff
+// notice - masks were programmatically generated - please verify last port group for 0xffff or (BIT(2))
+
+#define DEFAULT_FEATURES (FEATURE_OSD | FEATURE_TELEMETRY | FEATURE_AIRMODE | FEATURE_RX_SERIAL)
+#define DEFAULT_RX_FEATURE FEATURE_RX_SERIAL
+
+#define USABLE_TIMER_CHANNEL_COUNT 10
+#define USED_TIMERS ( TIM_N(1) | TIM_N(2) | TIM_N(3) | TIM_N(4) | TIM_N(5) | TIM_N(9) )
+
+// notice - this file was programmatically generated and may be incomplete.
diff --git a/src/main/target/FREEAXISF4/target.mk b/src/main/target/FREEAXISF4/target.mk
new file mode 100644
index 0000000000..b74036ecde
--- /dev/null
+++ b/src/main/target/FREEAXISF4/target.mk
@@ -0,0 +1,14 @@
+F411_TARGETS += $(TARGET)
+FEATURES += VCP ONBOARDFLASH
+
+TARGET_SRC = \
+drivers/accgyro/accgyro_spi_bmi270.c \
+$(addprefix drivers/compass/,$(notdir $(wildcard $(SRC_DIR)/drivers/compass/*.c))) \
+drivers/light_led.h \
+drivers/light_ws2811strip.c \
+drivers/max7456.c \
+
+# notice - this file was programmatically generated and may be incomplete.
+
+# This resource file generated using https://github.com/nerdCopter/target-convert
+# Commit: 3f33ae6 + 1 file changed, 24 deletions(-)