A simple sketch to test all fuctions of a FYSETC Mini 128x64 RGB display.
This also demonstrates how to use this display outside of a reprap/3d printer firmware
Designed for a ramps 1.4 board on a mega2560
It's all rather self explanatory
Flash this to the board and verify you get a display. On power on the RGB leds will show Red,Green,Blue then White (all on) The Title moves to show you its doing something. Try all the buttons and knobs, verify the display says they are working. If you insert the SD card it will try to read it and display the results. Remove the SD card to return to the main testing screen. Hold down both the STOP and Encoder button to activate the buzzer.