sram_ctrl.hjson

// Copyright lowRISC contributors (OpenTitan project).
// Licensed under the Apache License, Version 2.0, see LICENSE for details.
// SPDX-License-Identifier: Apache-2.0
{
  name:               "sram_ctrl",
  human_name:         "SRAM Controller",
  one_line_desc:      "Interfacing on-chip SRAM blocks with system bus, supports lightweight scrambling, integrity and secure wipe",
  one_paragraph_desc: '''
  SRAM Controller instantiates on-chip SRAM and makes it accessible through the TileLink on-chip interconnect.
  SRAM Controller includes a lightweight scrambling mechanism based on the PRINCE cipher to reduce the attack surface on the confidentiality and integrity of data stored in the SRAM.
  For end-to-end data integrity protection, SRAM Controller stores the integrity bits alongside data words in memory and raises an alert if it detects an integrity fault.
  SRAM Controller contains an LFSR-based initialization mechanism that overwrites the entire SRAM with pseudorandom data.
  '''
  // Unique comportable IP identifier defined under KNOWN_CIP_IDS in the regtool.
  cip_id:             "28",
  design_spec:        "../doc",
  dv_doc:             "../doc/dv",
  hw_checklist:       "../doc/checklist",
  sw_checklist:       "/sw/device/lib/dif/dif_sram_ctrl",
  version:            "1.1.0",
  life_stage:         "L1",
  design_stage:       "D3",
  verification_stage: "V2S",
  dif_stage:          "S2",
  clocking: [
    {clock: "clk_i", reset: "rst_ni", primary: true},
    {clock: "clk_otp_i", reset: "rst_otp_ni"}
  ]

  bus_interfaces: [
    { protocol: "tlul", direction: "device", name: "regs" }
    { protocol: "tlul", direction: "device", name: "ram" },
  ],

  ///////////////////////////
  // Interrupts and Alerts //
  ///////////////////////////

  alert_list: [
    { name: "fatal_error",
      desc: '''
            This fatal alert is triggered when a fatal TL-UL bus integrity fault is detected,
            or if the initialization mechanism has reached an invalid state.
            '''
    }
  ],

  ////////////////
  // Parameters //
  ////////////////
  param_list: [
    { name:      "RndCnstSramKey",
      desc:      "Compile-time random reset value for SRAM scrambling key.",
      type:      "otp_ctrl_pkg::sram_key_t"
      randcount: "128",
      randtype:  "data", // randomize randcount databits
    }
    { name:      "RndCnstSramNonce",
      desc:      "Compile-time random reset value for SRAM scrambling nonce.",
      type:      "otp_ctrl_pkg::sram_nonce_t"
      randcount: "128",
      randtype:  "data", // randomize randcount databits
    },
    { name:      "RndCnstLfsrSeed",
      desc:      "Compile-time random bits for initial LFSR seed",
      type:      "sram_ctrl_pkg::lfsr_seed_t"
      randcount: "32",
      randtype:  "data", // randomize randcount databits
    }
    { name:      "RndCnstLfsrPerm",
      desc:      "Compile-time random permutation for LFSR output",
      type:      "sram_ctrl_pkg::lfsr_perm_t"
      randcount: "32",
      randtype:  "perm", // random permutation for randcount elements
    }
    // This parameter is overridden by topgen to set the actual RAM size.
    { name:      "MemSizeRam",
      desc:      "Memory size of the RAM (in bytes).",
      type:      "int",
      default:   "0x1000"
    },
    { name:      "InstrExec",
      desc:      "Support execution from SRAM",
      type:      "bit",
      local:     "false",
      expose:    "true",
      default:   "1"
    },
    { name:      "NumPrinceRoundsHalf",
      desc:      "Number of PRINCE half rounds for the SRAM scrambling feature",
      type:      "int",
      local:     "false",
      expose:    "true",
      default:   "3"
    },
  ]

  features: [
    { name: "SRAM_CTRL.INTEGRITY",
      desc: '''
        Words are stored with integrity bits (7 integrity bits for each 32 data bits).
      '''
    },
    { name: "SRAM_CTRL.SCRAMBLED",
      desc: '''
        Backing memory is scrambled.
        The scrambling depends on keys configurable by a CSR.
      '''
    },
    { name: "SRAM_CTRL.LOCK_ON_ERROR",
      desc: '''
        The block disallows transactions and sends out an alert if it detects an error.
        This can come from a bus integrity failure or from a message from the lifecycle controller.
      '''
    },
    { name: "SRAM_CTRL.MEMSET",
      desc: '''
        The block can initialise the contents of memory with a pseudo-random stream.
        This avoids leaking the cipher key (which would be possible with a CTR-based cipher).
      '''
    },
    { name: "SRAM_CTRL.FETCH_ALLOW",
      desc: '''
        Access for instruction fetches can be allowed or disallowed.
        Instruction fetches can be completely disallowed for an instance by a parameter.
        If possible in this instance, the choice depends on either life-cycle state or a CSR.
      '''
    },
    { name: "SRAM_CTRL.SUBWORD_ACCESS",
      desc: '''
        Sub-word reads and writes are supported.
      '''
    },
    { name: "SRAM_CTRL.REGWEN",
      desc: '''
        Configuration can be locked, using a REGWEN CSR.
      '''
    },
  ]

  /////////////////////////////
  // Intermodule Connections //
  /////////////////////////////

  inter_signal_list: [
    // Key request to OTP
    { struct:  "sram_otp_key"
      type:    "req_rsp"
      name:    "sram_otp_key"
      act:     "req"
      package: "otp_ctrl_pkg"
    },
    // SRAM attribute input
    { struct:  "ram_1p_cfg"
      type:    "uni"
      name:    "cfg"
      act:     "rcv"
      default: "'0"
      package: "prim_ram_1p_pkg"
    },
    // Broadcast from LC
    { struct:  "lc_tx"
      type:    "uni"
      name:    "lc_escalate_en"
      act:     "rcv"
      default: "lc_ctrl_pkg::Off"
      package: "lc_ctrl_pkg"
    },
    { struct:  "lc_tx"
      type:    "uni"
      name:    "lc_hw_debug_en"
      act:     "rcv"
      default: "lc_ctrl_pkg::Off"
      package: "lc_ctrl_pkg"
    },
    { struct:  "mubi8",
      type:    "uni",
      name:    "otp_en_sram_ifetch",
      act:     "rcv",
      package: "prim_mubi_pkg",
      default: "prim_mubi_pkg::MuBi8False"
    },
  ]

  /////////////////////
  // Countermeasures //
  /////////////////////

  countermeasures: [
    { name: "BUS.INTEGRITY",
      desc: "End-to-end bus integrity scheme."
    }
    { name: "CTRL.CONFIG.REGWEN",
      desc: "The SRAM control register is protected by a REGWEN."
    }
    { name: "EXEC.CONFIG.REGWEN",
      desc: "The SRAM execution enable register is protected by a REGWEN."
    }
    { name: "READBACK.CONFIG.REGWEN",
      desc: "The SRAM readback enable register is protected by a REGWEN."
    }
    { name: "EXEC.CONFIG.MUBI",
      desc: "The SRAM execution enable register is multibit encoded."
    }
    { name: "EXEC.INTERSIG.MUBI",
      desc: "The SRAM execution enable signal coming from OTP is multibit encoded."
    }
    { name: "LC_ESCALATE_EN.INTERSIG.MUBI",
      desc: "The life cycle escalation enable signal is multibit encoded."
    }
    { name: "LC_HW_DEBUG_EN.INTERSIG.MUBI",
      desc: "The life cycle hardware debug enable signal is multibit encoded."
    }
    { name: "MEM.INTEGRITY",
      desc: "End-to-end data/memory integrity scheme."
    }
    { name: "MEM.READBACK",
      desc: "Each read and write is checked with a readback."
    }
    { name: "MEM.SCRAMBLE",
      desc: "Data is scrambled with a keyed reduced-round PRINCE cipher in CTR mode."
    }
    { name: "ADDR.SCRAMBLE",
      desc: "Address is scrambled with a keyed lightweight permutation/diffusion function."
    }
    { name: "INSTR.BUS.LC_GATED",
      desc: "Prevent code execution from SRAM in non-test lifecycle states."
    }
    { name: "RAM_TL_LC_GATE.FSM.SPARSE",
      desc: "The control FSM inside the TL-UL gating primitive is sparsely encoded."
    }
    { name: "KEY.GLOBAL_ESC",
      desc: "Scrambling key and nonce are reset to a fixed value upon escalation, and bus transactions going to the memory will be blocked."
    }
    { name: "KEY.LOCAL_ESC",
      desc: "Scrambling key and nonce are reset to a fixed value upon local escalation due to bus integrity or counter errors, and bus transactions going to the memory will be blocked."
    }
    { name: "INIT.CTR.REDUN",
      desc: "The initialization counter is duplicated."
    }
    { name: "SCRAMBLE.KEY.SIDELOAD",
      desc: "The scrambling key is sideloaded from OTP and thus unreadable by SW."
    }
    { name: "TLUL_FIFO.CTR.REDUN",
      desc: "The TL-UL response FIFO pointers are implemented with duplicate counters."
    }
  ]

  regwidth: "32",
  registers: {
    regs: [
      ////////////////////////
      // Ctrl / Status CSRs //
      ////////////////////////

      { name: "STATUS",
        desc: "SRAM status register.",
        swaccess: "ro",
        hwaccess: "hrw",
        hwqe:     "false",
        fields: [
          { bits: "0"
            name: "BUS_INTEG_ERROR"
            desc: '''
                  This bit is set to 1 if a fatal bus integrity fault is detected.
                  This error triggers a fatal_error alert.
                  This condition is terminal.
                  ''',
            resval: 0,
          }
          { bits: "1"
            name: "INIT_ERROR"
            desc: '''
                  This bit is set to 1 if a the initialization counter has reached an invalid state.
                  This error triggers a fatal_error alert.
                  This condition is terminal.
                  ''',
            resval: 0,
          }
          { bits: "2"
            name: "ESCALATED"
            desc: '''
                  Set to 1 if the sram controller has received an escalate request.
                  If this is set to 1, the scrambling keys have been reset to the default values
                  and all subsequent memory requests will be blocked.
                  This condition is terminal.
                  ''',
            resval: 0,
          }
          { bits: "3"
            hwaccess: "hwo",
            name: "SCR_KEY_VALID"
            desc: '''
                  Set to 1 if a new scrambling key has been successfully obtained from OTP.
                  Note that if this is set to 0, the SRAM contents are still scrambled, but a
                  default all-zero key and nonce are used to do so.
                  ''',
            resval: 0,
          }
          { bits: "4"
            name: "SCR_KEY_SEED_VALID"
            desc: '''
                  Set to 1 if the scrambling key has been derived from a valid key seed in OTP.
                  If !!STATUS.SCR_KEY_VALID is set to 1, !!STATUS.SCR_KEY_SEED_VALID should be 1
                  except for cases where the scrambling key seeds have not yet been provisioned to
                  OTP. In such a case, the scrambling key is still ephemeral (i.e., it is derived
                  using entropy from CSRNG), but a default all-zero value is used as the key seed.
                  ''',
            resval: 0,
          }
          { bits: "5"
            name: "INIT_DONE"
            desc: '''
                  Set to 1 if the hardware initialization triggered via !!CTRL.INIT has completed.
                  ''',
            resval: 0,
          }
          { bits: "6"
            name: "READBACK_ERROR"
            desc: '''
                  This bit is set to 1 if a SRAM readback check failed.
                  This error triggers a fatal_error alert.
                  This condition is terminal.
                  ''',
            resval: 0,
          }
          { bits: "7"
            name: "SRAM_ALERT"
            desc: '''
                  This bit is set to 1 if a multi bit encoding error has been detected inside the RAM modules.
                  This error triggers a fatal_error alert.
                  This condition is terminal.
                  ''',
            resval: 0,
          }
        ]
      }
      { name: "EXEC_REGWEN",
        desc: "Lock register for execution enable register.",
        swaccess: "rw0c",
        hwaccess: "none",
        fields: [
          { bits: "0"
            desc: '''
                  When cleared to zero, !!EXEC can not be written anymore.
                  ''',
            resval: 1
          }
        ]
      }
      { name: "EXEC",
        desc: "Sram execution enable.",
        swaccess: "rw",
        hwaccess: "hro",
        regwen:   "EXEC_REGWEN"
        fields: [
          { bits: "3:0",
            name: "EN",
            mubi: true,
            desc: '''
                  Write kMultiBitBool4True to this field to enable execution from SRAM.
                  Note that this register only takes effect if the EN_SRAM_IFETCH switch
                  in the OTP HW_CFG1 partition is set to kMultiBitBool8True. Otherwise execution
                  from SRAM cannot be enabled via this register.
                  ''',
            resval: false
          },
        ]
      },
      { name: "CTRL_REGWEN",
        desc: "Lock register for control register.",
        swaccess: "rw0c",
        hwaccess: "none",
        fields: [
          { bits: "0"
            desc: '''
                  When cleared to zero, !!CTRL can not be written anymore.
                  ''',
            resval: 1
          }
        ]
      }
      { name: "CTRL",
        desc: "SRAM ctrl register.",
        swaccess: "wo",
        hwaccess: "hro",
        hwqe:     "true",
        regwen:   "CTRL_REGWEN"
        tags: [// avoid writing to CTRL, as this will cause STATUS to be modified
               "excl:CsrNonInitTests:CsrExclWrite"]
        fields: [
          { bits: "0",
            name: "RENEW_SCR_KEY",
            desc: '''
                  Write 1 to request a new scrambling key from OTP. After writing to this register, SRAM transactions will
                  be blocked until !!STATUS.SCR_KEY_VALID has been set to 1. If !!STATUS.SCR_KEY_VALID was already 1
                  before triggering a key renewal, hardware will automatically clear that status bit such that software
                  can poll its status. Note that requesting a new scrambling key takes ~200 OTP cycles, which translates
                  to ~800 CPU cycles (OTP runs at 24MHz, CPU runs at 100MHz). Note that writing 1 to this register while
                  a key request or a memory initialization request is already pending has no effect.
                  '''
          },
          { bits: "1",
            name: "INIT",
            desc: '''
                  Write 1 to request memory init.
                  The init mechanism uses an LFSR that is seeded with a part of the nonce supplied when requesting a scrambling key.
                  Once seeded, the memory is initialized with pseudo-random data pulled from the LFSR.
                  Note that !!CTRL.RENEW_SCR_KEY takes priority when writing 1 to both !!CTRL.RENEW_SCR_KEY and !!CTRL.INIT with the same write transaction.
                  This means that the key request will complete first, followed by SRAM initialization. Note that writing 1 to this register while
                  an init request is already pending has no effect.
                  '''
          },
        ]
      },
      { name: "SCR_KEY_ROTATED",
        desc: "Clearable SRAM key request status.",
        swaccess: "rw1c",
        hwaccess: "hwo",
        fields: [
          { bits: "3:0",
            name: "SUCCESS",
            mubi: true,
            desc: '''
                  This status register is similar to !!SCR_KEY_VALID with the difference that the status is multibit encoded,
                  SW clearable and sticky (i.e., HW does not auto-clear the register except during escalation). That way,
                  SW can use this for a hardened acknowledgement mechanism where it clears the register before requesting a key.

                  kMultiBitBool4True indicates that a valid scrambling key has been obtained from OTP.
                  Write kMultiBitBool4True to clear.
                  ''',
            resval: false
          },
        ]
      }
      { name: "READBACK_REGWEN",
        desc: "Lock register for readback enable register.",
        swaccess: "rw0c",
        hwaccess: "none",
        tags: [// Exclude from writes to these field because they cause side affects.
             "excl:CsrAllTests:CsrExclAll"]
        fields: [
          { bits: "0"
            desc: '''
                  When cleared to zero, !!READBACK can not be written anymore.
                  ''',
            resval: 1
          }
        ]
      }
      { name: "READBACK",
        desc: "readback enable.",
        swaccess: "rw",
        hwaccess: "hro",
        regwen:   "READBACK_REGWEN"
        tags: [// Exclude from writes to these field because they cause side affects.
             "excl:CsrAllTests:CsrExclAll"]
        fields: [
          { bits: "3:0",
            name: "EN",
            mubi: true,
            desc: '''
                  Write kMultiBitBool4True to this field to enable the readback security feature for the SRAM.
                  A readback of each memory write or read request will be performed and a comparison happens.
                  Any other value than kMultiBitBool4False written to this field is interpreted as kMultiBitBool4True.
                  ''',
            resval: false
          },
        ]
      },
    ],

    ram: [
      // no CSRs defined here.
    ]
  }
}