Skip to content

Latest commit

 

History

History
205 lines (141 loc) · 10.9 KB

devnet.md

File metadata and controls

205 lines (141 loc) · 10.9 KB
Raw
title
Experiment with Sui DevNet

Welcome to the beginnings of the Sui DevNet. It exists now to gain operational experience with the Sui software in a public setting. The Sui DevNet currently consists of:

Many improvements to the Sui DevNet are underway, such as the ability to run full nodes and use a browser-based wallet. See the Sui DevNet blog post announcement for full details on upcoming features. All DevNet usage is subject to our terms of service.

Tools

We provide the following tools for users to interact with the Sui Devnet:

Prerequisites

Set up environment

You may simply install Sui and then request test tokens as described below. To use the Sui DevNet, you will need:

  1. Sui test coins (tokens) requested through Discord.
  2. the git command line interface.
  3. Sui binaries in your PATH environment variable, particularly wallet.

Remember, you can confirm the existence of a command in your PATH by running which followed by the command, for example:

$ which wallet

You should see the path to the command. Otherwise, reinstall.

Tip: To reliably test DevNet with the latest Sui binaries, re-install them at least weekly.

In addition, to conduct advanced work such as publishing a Move module or making a Move call, also obtain the Sui source code; for simplicity, we recommend installing in ~/sui or using an environment variable.

Set up wallet, connect to gateway

Now set up your wallet and connect to DevNet in a single step. Note you can manually change the Gateway URL if you have already configured a Sui wallet.

Tip: If you run into issues, reset the Sui configuration by removing its directory, by default located at ~/.sui/sui_config. Then reinstall Sui binaries.

Basic testing

Request gas tokens

Request gas tokens by posting your wallet address in the #devnet-faucet Discord channel if you haven't already and wait for them to be issued.

You can find your wallet address by running:

$ wallet active-address

Mint an example NFT

To create a Non-Fungible Token (NFT), run:

$ wallet create-example-nft

You will see output resembling:

Successfully created an ExampleNFT:

ID: ED883F6812AF447B9B0CE220DA5EA9E0F58012FE
Version: 1
Owner: Account Address ( 9E9A9D406961E478AA80F4A6B2B167673F3DF8BA )
Type: 0x2::devnet_nft::DevNetNFT

The above command created an object with ID ED883F6812AF447B9B0CE220DA5EA9E0F58012FE. Note you may use wallet to view objects owned by the account.

Now you can view the created object in the Sui Explorer at: https://explorer.devnet.sui.io/objects/ED883F6812AF447B9B0CE220DA5EA9E0F58012FE

Replace the object ID in the link above with the object ID of the Example NFT you observed in your own command output to see it in Sui Explorer:

Example NFT

Note you may easily customize the name, description, or image of the NFT upon creation, like so:

$ wallet create-example-nft --url=https://user-images.githubusercontent.com/76067158/166136286-c60fe70e-b982-4813-932a-0414d0f55cfb.png --description="The greatest chef in the world" --name="Greatest Chef"

Which results in a new object ID:

Successfully created an ExampleNFT:

ID: EC97467A40A1305FFDEF7019C3045FBC7AA31E29
Version: 1
Owner: Account Address ( 9E9A9D406961E478AA80F4A6B2B167673F3DF8BA )
Type: 0x2::devnet_nft::DevNetNFT

That you can similarly view at: https://explorer.devnet.sui.io/objects/EC97467A40A1305FFDEF7019C3045FBC7AA31E29

Custom NFT

See all transactions on the home page and find the transaction hash under Latest Transactions:

Explorer home

To get to the Transaction Details view in Sui Explorer after minting an NFT, click on the Last Transaction ID field in the Object View.

Transaction details

Click on any address to see the objects it owns:

Owned objects

See the Sui Explorer README for more details.

Advanced testing

Publish a Move module

Publish a sample Move package containing code developed in the Sui Move tutorial as follows (assuming you installed the source code in ~sui as advised in set up):

$ wallet publish --path <your-sui-repo>/sui_programmability/examples/move_tutorial --gas-budget 30000

You will see this output:

----- Certificate ----
Signed Authorities : [k#2266186afd9da10a43dd3ed73d1039c6793d2d8514db6a2407fcf835132e863b, k#1d47ad34e2bc5589882c500345c953b5837e30d6649d315c61690ba7a1e28d23, k#e9599283c0da1ac2eedeb89a56fc49cd8f3c0d8d4ddba9b0a0a5054fe7df3ffd]
Transaction Kind : Publish

----- Publish Results ----
The newly published package object ID: 0689E58788C875E9C354F359792CEC016DA0A1B0
List of objects created by running module initializers:

ID: 898922A9CABE93C6C38C55BBE047BFB0A8C864BF
Version: 1
Owner: Account Address ( F16A5AEDCDF9F2A9C2BD0F077279EC3D5FF0DFEE )
Type: 0x689e58788c875e9c354f359792cec016da0a1b0::M1::Forge

Updated Gas : Coin { id: 58C4DAA98694266F4DF47BA436CD99659B6A5342, value: 49552 }

Two important things happened as a result of publishing this package:

  • a package object (with ID 0689E58788C875E9C354F359792CEC016DA0A1B0) has been created
  • a Forge object (with ID 898922A9CABE93C6C38C55BBE047BFB0A8C864BF) has been created as a result of running a module initializer for one (and the only one) module of this package

Specific object IDs displayed above may differ from one Sui installation to the other, so we will use the following placeholders for them (respectively): <PACKAGE_ID> and <FORGE_ID>. Whenever you see these used in the command line, for example when calling Move functions in the next section, replace them with actual object IDs.

Make a Move call

In the previous section, we learned how to publish a Move package; and in this section, we will learn how to call into functions defined in this package. As a result of publishing a package, we obtained the new package object ID (<PACKAGE_ID>) and ID of the Forge object (<FORGE_ID>) that can be used to create swords and transfer them to other players.

Let’s assume that the placeholder for the address of the player to receive a sword is <PLAYER_ADDRESS>. If you don’t know any address other than your own, you can create one using the following wallet command and use it whenever you see the <PLAYER_ADDRESS> placeholder:

$ wallet new-address

Which yields output resembling:

Created new keypair for address : 2D32ED71381BEF7F3D8C57B48DF82123593672AA

In order to create a sword and transfer it to another player, we use the following command to call the sword_create function in the M1 module of the package we previously published.

Important: Note placeholders on the command line and formatting of function parameters as it is important to follow the same pattern.

Now run:

$ wallet call --function sword_create --module M1 --package 0x<PACKAGE_ID> --args \"0x<FORGE_ID>\" 42 7 \"0x<PLAYER_ADDRESS>\" --gas-budget 30000

And receive output like:

----- Certificate ----
Signed Authorities : [k#2266186afd9da10a43dd3ed73d1039c6793d2d8514db6a2407fcf835132e863b, k#1d47ad34e2bc5589882c500345c953b5837e30d6649d315c61690ba7a1e28d23, k#e9599283c0da1ac2eedeb89a56fc49cd8f3c0d8d4ddba9b0a0a5054fe7df3ffd]
Transaction Kind : Call
Package ID : 0x689e58788c875e9c354f359792cec016da0a1b0
Module : M1
Function : sword_create
Arguments : [ImmOrOwnedObject((898922A9CABE93C6C38C55BBE047BFB0A8C864BF, SequenceNumber(1), o#9f12d4390e4fc8de3834c4960c6f265a78eca7c2b916ac1be66c1f00e1b47c68)), Pure([42, 0, 0, 0, 0, 0, 0, 0]), Pure([7, 0, 0, 0, 0, 0, 0, 0]), Pure([45, 50, 237, 113, 56, 27, 239, 127, 61, 140, 87, 180, 141, 248, 33, 35, 89, 54, 114, 170])]
Type Arguments : []

----- Transaction Effects ----
Status : Success { gas_cost: GasCostSummary { computation_cost: 69, storage_cost: 40, storage_rebate: 27 } }
Created Objects:
  - ID: 2E34983D59E9FC5310CFBAA953D2188E6A84FD21 , Owner: Account Address ( 2D32ED71381BEF7F3D8C57B48DF82123593672AA )
Mutated Objects:
  - ID: 58C4DAA98694266F4DF47BA436CD99659B6A5342 , Owner: Account Address ( ADE6EAD34629411F730416D6AD48F6B382BBC6FD )
  - ID: 898922A9CABE93C6C38C55BBE047BFB0A8C864BF , Owner: Account Address ( ADE6EAD34629411F730416D6AD48F6B382BBC6FD )

Go to the Sui Explorer to observe a newly created object (ID 2E34983D59E9FC5310CFBAA953D2188E6A84FD21, in this example). You should see a sword object created with Magic property of 42 and Strength property of 7 and transferred to the new owner.

As above, replace object ID in the Explorer link with the object ID of the created object you observed in your own command output: https://explorer.devnet.sui.io/objects/OBJECT-ID

Magic sword

This concludes the Sui DevNet setup and testing instructions. Revisit this page and re-install the binaries regularly to witness and help Sui grow!