Update Character set
To upload you need a FTDI cable like this: Link (Also make sure that you have the FTDI driver installed)
Important: If you have video and digital side of the osd separated you also have to power the video side to be able to upload the new character file!
1./ Preparing:
After you have MinimOSD connected, open the Config Tool, and select the right port.
Impoertant: If you are using plane FW you have to upload the character uploading FW (The firmware file is located at Config_Tool_directory\FW & Char\Character_Updater_FW.hex) to be able to upload character file. (The latest plane fw does not suports this function.) After characres are uploaded you can upload the Plane FW again.
2./ Uploading:
Click on "Options" menu and choose "Update charset".
The charset file is located in Config_Tool_directory\FW & Char\ (.mcm)