From 00c1909b7ff014e4142f83e28800d0fcf161f2e1 Mon Sep 17 00:00:00 2001 From: Jiande Lu Date: Mon, 4 Nov 2024 22:59:31 +0800 Subject: [PATCH] Bluetooth: btusb: Add 3 HWIDs for MT7925 Add below HWIDs for MediaTek MT7925 USB Bluetooth chip. VID 0x0489, PID 0xe14f VID 0x0489, PID 0xe150 VID 0x0489, PID 0xe151 Patch has been tested successfully and controller is recognized device pair successfully. MT7925 module bring up message as below. Bluetooth: Core ver 2.22 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized Bluetooth: hci0: HW/SW Version: 0x00000000, Build Time: 20240816133202 Bluetooth: hci0: Device setup in 286558 usecs Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. Bluetooth: hci0: AOSP extensions version v1.00 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized Bluetooth: MGMT ver 1.22 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Signed-off-by: Jiande Lu Signed-off-by: Luiz Augusto von Dentz (cherry picked from commit de7dcf9d1df4b0009735756d0a2adff09c3f21d4) --- drivers/bluetooth/btusb.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index a29982381c27..f66a8d38e3ce 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -657,6 +657,12 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe139), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0489, 0xe14f), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0489, 0xe150), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0489, 0xe151), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3602), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3603), .driver_info = BTUSB_MEDIATEK |