ESP_MQTT_Secure

⚠️ ⚠️ ⚠️ Will not be maintained/updated ⚠️ ⚠️ ⚠️

Demonstration on ESP8266 & ESP32 using SSL/TLSv1.2 two-way handshake with secured mosquitto broker.

Dependencies

Listed below are the dpendencies used by Arduino IDE, but use PlatformioIO instead!

Library	Link	Use
PubSubClient	https://github.com/knolleary/pubsubclient	mqtt comm impl
MQTT	https://github.com/256dpi/arduino-mqtt	mqtt comm impl

Installing mosquitto on RPi (Stretch) as of Nov 16th 2018

See video to find out the steps to obtain ca.crt, raspberrypi.crt, raspberry.key

$ sudo apt-get update
$ sudo apt-get install -y mosquitto mosquitto-clients
$ sudo systemctl enable mosquitto.service 

$ sudo cp ca.crt /etc/mosquitto/certs
$ sudo cp raspberrypi.crt /etc/mosquitto/certs
$ sudo cp raspberrypi.key /etc/mosquitto/certs

$ sudo chown mosquito: /etc/mosquitto/certs 

$ sudo mosquitto_passwd -c /etc/mosquitto/passwd miot

Add following lines to bottom of /etc/mosquitto/mosquitto.conf

allow_anonymous false
password_file /etc/mosquitto/passwd

listener 1883 127.0.0.1

listener 8883
cafile /etc/mosquitto/certs/ca.crt
certfile /etc/mosquitto/certs/raspberrypi.crt
keyfile /etc/mosquitto/certs/raspberrypi.key
require_certificate false

listener 9883
protocol websockets
cafile /etc/mosquitto/certs/ca.crt
certfile /etc/mosquitto/certs/raspberrypi.crt
keyfile /etc/mosquitto/certs/raspberrypi.key
require_certificate false

After updating mosquitto.conf, start the mosquitto server

$ sudo systemctl start mosquitto.service 

Remember to forward ports 8883 and 9883 to the internet!