IRremoteESP8266 v2.6.5

v2.6.5 (20190828)

[Bug Fixes]

• IRMQTTServer: Remove duplicate MQTT_CLIMATE from HA discovery (#869)
• Fujitsu: Ensure on() is called in common a/c framework. (#862)
• Update strToModel() (#861)
• IRMQTTServer: Add missing header file. (#858)
• IRMQTTServer: Fix a compile error when HTML_PASSWORD_ENABLE is enabled. (#856)

[Features]

• IRrecv: Allow tolerance percentage to be set at run-time. (#865)
• Basic support for Daikin152 A/C protocol. (#874)
• Teco: Add light, humid, & save support. (#871)
• Detailed support for Amcor A/C protocol. (#836, #854)
• IRMQTTServer: Add ability to report Vcc at the ESP chip. (#845)
• Gree: Add timer support. (#849)
• IRac/Mitsubishi A/C: Support wide swingh_t mode (#844)
• IRMQTTServer: Generate protocol and bit size html selects (#838)

[Misc]

• New example code to show how to use the IRac class to control A/Cs (#839)
• Improve/fix swingh_t::kWide support (#846)
• Kelvinator: Optimise code a little to save space. (#843)

IRremoteESP8266 v2.6.4

v2.6.4 (20190726)

[Bug Fixes]

• Fix some swing problems with the Mitsubishi HAVC protocol (#831)
• Fix parameter ordering for Gree in common a/c code. (#815)
• Fix parameters for Coolix in IRac::sendAc() (#829)
• IRMQTTServer: Fix sending >64 bit codes. (#811)

[Features]

• Daikin128: Full detailed support & common a/c support. (#832)
• Midea: Support native temp units of Celsius & SwingV. (#823)
• Gree: Support YBOFB models and bug fix. (#815)
• Pioneer: Fix sendPioneer with Pioneer specific timings (#830)
• Daikin128: Initial support for Daikin 17 Series/BRC52B63 (#828)
• Coolix: Better toCommon() support. (#825)
• Experimental detailed support for Daikin 176 bits (#816)
• Add setting of output options to A/C classes. (#808)
• Add invert flag support to Samsung AC (#807)

[Misc]

• Daikin176: making some change on Daikin176 to work with IRMQTTServer (#826)
• Reduce duplicate code to save (3K+) space. (#813)
• Daikin176: Experiment Daikin176bits with IRMQTTServer (#824)
• Update platformio.ini files for PlatformIO v4.0.0 (#812)
• Change repo URLs to new location. (#806)
• Move htmlEscape() to the IRutils namespace (#801)

IRremoteESP8266 v2.6.3

v2.6.3 (20190704)

[Bug Fixes]

• IRMQTTServer: REPLAY_DECODED_AC_MESSAGE not working. (#784, #797)
• ESP32: Ensure IRrecv's GPIO is set to input mode. (#774)

[Features]

• IRMQTTServer: Show available sketch space for OTA uploads. (#795)
• Experimental detailed support for Electra/AUX protocol (#788)
• IRMQTTServer: Ability to resend existing climate state via MQTT & HTTP (#784)
• Daikin160: Add detailed & common a/c support. (#777)
• Experimental detailed support for Neoclima protocol. (#767)
• Gree: add WiFi and IFeel bits (#770)
• Handle A/Cs with toggles better. (#758)
• IRMQTTServer: Allow sending/receiving climate via JSON over MQTT. (#763)

[Misc]

• Move converting of IR A/C messages out of example code. (#798)
• Reduce example code size and complexity (#790)
• Change ControlSamsungAC example to not use sendExtended() (#792)
• IRMQTTServer: Add MQTT_CLIMATE_IR_SEND_ON_RESTART compile-time flag. (#784)
• Refactor A/C's toString()'s to reduce code size. Saves ~3.5k (#782)
• Add sanity tests for unexpected conditions in IRrecv. (#773)
• IRMQTTServer: Fixed the HA config documentation (missing '-') (#776)
• Improve mkkeywords tool. (#766)
• Refactor with generic decode routines in IRrecv class. Saves ~7k. (#765)

IRremoteESP8266 v2.6.2

v2.6.2 (20190616)

[Features]

• Initial support for the ESP32 architecture & boards. (#742)
• Add changable GPIO settings to IRMQTTServer. (#730)
• IRMQTTServer: Enforce a repeat for all Coolix calls (#752)
• Basic DAIKIN 160bit send and decode. (#754)
• Add example code for a Smart(er) IR Repeater. (#740)
• Enforce Samsung A/C Quiet & Powerful mutual exclusivity.

[Misc]

• IRMQTTServer: Add some memory alloc safety checks. (#749)
• Move some ToString() functions to IRac.cpp (#748)
• Increase tolerance value for TCL112AC protocol. (#745)
• Fix compiler warning in IRutils_test.cpp (#756)
• Scrape Supported Protocols and generate SupportedProtocols.md (#755)
• Make supported device info more organised. (#753)

IRremoteESP8266 v2.6.1

v2.6.1 (20190609)

[Breaking Changes]

• Major rework/breaking changes to Argo A/C support. (#705)

[Bug Fixes]

• Correct set/getQuiet for Samsung A/C (#736)
• Add missing on/off() to IRCoolixAC class. (#725)
• Daikin set/getEye() uses wrong bit. (#711)
• IRMQTTServer: Continue to use same Temperature units. (#710)
• Fixed a bug with setMode()/getMode() for HAIER_AC. (#705)

[Features]

• Add set/getPowerful for Samsung A/C (#736)
• Add calibrate() to all the A/C classes. (#735)
• IRMQTTServer: Add sequencing for sending MQTT IR commands. (#723)
• Add support for Fujitsu AR-REB1E & AR-JW2 remotes. (#718)
• Add Beta decodeTrotec() support. (#719)
• Add experimental decodeArgo() support. (#717)
• Support for Goodweather A/Cs. (#715)
• Add DISABLE_CAPTURE_WHILE_TRANSMITTING feature to IRMQTTServer. (#713)
• Support for Lixil Inax Toilet protocol. (#712)
• Add set/getWeeklyTimerEnable() to Daikin (#711)
• IRMQTTServer: Update Common A/C settings based on received IR messages. (#705)
• Add day of week to DAIKIN protocol (#699)
• Add limited support for Sharp A/C (#696)
• SAMSUNG_AC: Make sure special power mode messages are sent. (#695)
• Add set/getPowerful() (turbo) to DAIKIN216 (#693)

[Misc]

• Add kPeriodOffset for CPU Freq of 160MHz. (#729)
• Example code for a Dumb IR repeater. (#737)
• Update swing handling for Fujitsu A/Cs. (#724)
• Add function to convert decode_results to sendRaw() array. (#721)
• Attempt to reduce heap fragmentation from strings. (#707)
• Update Fujitsu A/C example code to safer settings (#716)
• Enforce better const usage in IRUtils. (#708)
• Attempt to reduce heap fragmentation by A/C toString()s. (#694)
• Minor changes to DAIKIN216 timings and features. (#693)

IRremoteESP8266 v2.6.0

v2.6.0 (20190430)

[Bug Fixes]

• Fixed problem where LG protocol used wrong duty cycle for repeat. (#687)
• Fix checksum calculation for Daikin protocols. (#678)
• Fix the byte array version of sendGree() (#684, #685)
• Fix artificial vs. real state creation on HaierAC. (#668, #671)
• Fix issues caused by having MQTT_ENABLE set to false. (#677)
• Fix compile problem when DEBUG is defined. (#673, #674)
• Fix Minor bug with MQTT_ENABLE False condition (#654)

[Features]

• Experimental support for DAIKIN216 (ARC433B69) (#690)
• Experimental support for Mitsubishi Heavy Industries A/Cs. (#660, #665, #667)
• Support more features of TCL A/C (#656)
• Add LEGO(TM) Power Functions IR protocol. (#655)
• Add Panasonic AC RKR model & Example (#649)
• DAIKIN/IRDaikinESP overhaul and add Comfort mode support. (#678)
  WARNING: Previous sendDaikin() calls may not work.
  Please recapture codes or use kDaikinStateLengthShort for
  nbytes in those calls.
• IRMQTTServer: Move MQTT server and other parameters to WifiManager. (#680)
  WARNING: Previous users may need to fully wipe/reset the
  SPIFFS/WifiManager settings by visiting
  http://<your_esp8266's_ip_address>/reset prior to or
  after update.
• Add Wifi filtering options to IRMQTTServer. (#679)
• Add advanced aircon/climate functionality to IRMQTTServer (#677)
• Initial prototype of a common interface for all A/Cs. (#664)
• Improve MQTT topic usage for feedback messages. (#663)
• Add multiple independent GPIO sending support via MQTT. (#661)

[Misc]

• Adjust kGreeHdrSpace to 4500 (#684, #686)
• Add Home Assistant mqtt climate instructions. (#682)
• Implement htmlEscape() to prevent XSS etc. (#681)
• Add F() Macros (#670)
• Update Daikin2's Cool mode min temp to 18C (#658)
• Change per byte bit-order in Electra protocol. (#648)
• Improve Daikin2 power on/off. (#647)

IRremoteESP8266 v2.5.6

v2.5.6 (20190316)

[Bug Fixes]

• Fix Coolix A/C Class to handle special states better. (#633, #624)

[Features]

• Fix case style for recent A/C protocols. (#631)
• Update IRsend::send() to include all simple protocols. (#629, #628)
• Experimental basic support for 112 bit TCL AC messages (#627, #619)
• Add support for TECO AC (#622)
• Experimental support for Samsung 36 bit protocol (#625, #621)

[Misc]

• Set Coolix to default to 1 repeat. (#637, #636, #624, #439)
• Set Daikin2 modulation to 36.7kHz. (#635)
• Refactor IRVestelAC class to use portable code. (#617)
• Adjust Daikin2 timings and tolerance. (#616, #582)

IRremoteESP8266 v2.5.4

v2.5.5 (20190207)

[Bug Fixes]

• Fix decoding of Samsung A/C Extended messages. (#610)
• Fix IRMQTTServer example to work with GPIO0 as IR_RX (#608)
• Fix incorrect #define usage. (#597, #596)

[Features]

• Add deep decoding/construction of Daikin2 messages (#600)
• Added Old Vestel A/C support (56 Bits) with full functions. (#607)

[Misc]

• Add ControlSamsungAC example code. (#599)
• Add how to send a state/air-con to IRsendDemo.ino (#594)

IRremoteESP8266 v2.5.4

v2.5.4 (20190102)

[Features]

• Experimental basic support for 39 Byte Daikin A/C (#583)
• Handle send() repeats in A/C classes. Improve Coolix support. (#580)
• Add optional RX pin pullup and dump raw messages in IRMQTTServer.ino (#589)

[Misc]

• Make auto_analyse_raw_data.py work with Python3 (#581)
• Update CI/travis config due to esp8266 core 2.5.0 changes (#591)

IRremoteESP8266 v2.5.3

v2.5.3 (20181123)

[Features]

• Add deep support for the Hitachi 28-Byte A/C Protocol (#563)
• Deep decoding for Whirlpool A/C (#572)
• Improve security options for IRMQTTServer example. (#575)
• Require a changed firmware password before upload. (#576)

[Misc]

• Add missing } in output of Auto analyse. (#562)
• Make A/C example code a bit more simple. (#571)