v2.6.1 release (#741)

_v2.6.1 (20190609)_

**[Breaking Changes]**
- Major rework/breaking changes to Argo A/C support. (#705)

**[Bug Fixes]**
- Correct `set/getQuiet` for Samsung A/C (#736)
- Add missing `on/off()` to IRCoolixAC class. (#725)
- Daikin `set/getEye()` uses wrong bit. (#711)
- IRMQTTServer: Continue to use same Temperature units. (#710)
- Fixed a bug with `setMode()`/`getMode()` for HAIER_AC. (#705)

**[Features]**
- Add set/getPowerful for Samsung A/C (#736)
- Add `calibrate()` to all the A/C classes. (#735)
- IRMQTTServer: Add sequencing for sending MQTT IR commands. (#723)
- Add support for Fujitsu AR-REB1E & AR-JW2 remotes. (#718)
- Add Beta `decodeTrotec()` support. (#719)
- Add experimental `decodeArgo()` support. (#717)
- Support for Goodweather A/Cs. (#715)
- Add `DISABLE_CAPTURE_WHILE_TRANSMITTING` feature to IRMQTTServer. (#713)
- Support for Lixil Inax Toilet protocol. (#712)
- Add `set/getWeeklyTimerEnable()` to Daikin (#711)
- IRMQTTServer: Update Common A/C settings based on received IR messages. (#705)
- Add day of week to DAIKIN protocol (#699)
- Add limited support for Sharp A/C (#696)
- SAMSUNG_AC: Make sure special power mode messages are sent. (#695)
- Add `set/getPowerful()` (turbo) to DAIKIN216 (#693)

**[Misc]**
- Add kPeriodOffset for CPU Freq of 160MHz. (#729)
- Example code for a Dumb IR repeater. (#737)
- Update swing handling for Fujitsu A/Cs. (#724)
- Add function to convert decode_results to sendRaw() array. (#721)
- Attempt to reduce heap fragmentation from strings. (#707)
- Update Fujitsu A/C example code to safer settings (#716)
- Enforce better `const` usage in IRUtils. (#708)
- Attempt to reduce heap fragmentation by A/C `toString()`s. (#694)
- Minor changes to DAIKIN216 timings and features. (#693)

README.md

@@ -8,8 +8,8 @@
 
 This library enables you to **send _and_ receive** infra-red signals on an [ESP8266 using the Arduino framework](https://github.com/esp8266/Arduino) using common 940nm IR LEDs and common IR receiver modules. e.g. TSOP{17,22,24,36,38,44,48}* etc.
 
-## v2.6.0 Now Available
-Version 2.6.0 of the library is now [available](https://github.com/markszabo/IRremoteESP8266/releases/latest). You can view the [Release Notes](ReleaseNotes.md) for all the significant changes.
+## v2.6.1 Now Available
+Version 2.6.1 of the library is now [available](https://github.com/markszabo/IRremoteESP8266/releases/latest). You can view the [Release Notes](ReleaseNotes.md) for all the significant changes.
 
 #### Upgrading from pre-v2.0
 Usage of the library has been slightly changed in v2.0. You will need to change your usage to work with v2.0 and beyond. You can read more about the changes required on our [Upgrade to v2.0](https://github.com/markszabo/IRremoteESP8266/wiki/Upgrading-to-v2.0) page.

ReleaseNotes.md

@@ -1,5 +1,46 @@
 # Release Notes
 
+## _v2.6.1 (20190609)_
+
+**[Breaking Changes]**
+- Major rework/breaking changes to Argo A/C support. (#705)
+
+**[Bug Fixes]**
+- Correct `set/getQuiet` for Samsung A/C (#736)
+- Add missing `on/off()` to IRCoolixAC class. (#725)
+- Daikin `set/getEye()` uses wrong bit. (#711)
+- IRMQTTServer: Continue to use same Temperature units. (#710)
+- Fixed a bug with `setMode()`/`getMode()` for HAIER_AC. (#705)
+
+**[Features]**
+- Add set/getPowerful for Samsung A/C (#736)
+- Add `calibrate()` to all the A/C classes. (#735)
+- IRMQTTServer: Add sequencing for sending MQTT IR commands. (#723)
+- Add support for Fujitsu AR-REB1E & AR-JW2 remotes. (#718)
+- Add Beta `decodeTrotec()` support. (#719)
+- Add experimental `decodeArgo()` support. (#717)
+- Support for Goodweather A/Cs. (#715)
+- Add `DISABLE_CAPTURE_WHILE_TRANSMITTING` feature to IRMQTTServer. (#713)
+- Support for Lixil Inax Toilet protocol. (#712)
+- Add `set/getWeeklyTimerEnable()` to Daikin (#711)
+- IRMQTTServer: Update Common A/C settings based on received IR messages. (#705)
+- Add day of week to DAIKIN protocol (#699)
+- Add limited support for Sharp A/C (#696)
+- SAMSUNG_AC: Make sure special power mode messages are sent. (#695)
+- Add `set/getPowerful()` (turbo) to DAIKIN216 (#693)
+
+**[Misc]**
+- Add kPeriodOffset for CPU Freq of 160MHz. (#729)
+- Example code for a Dumb IR repeater. (#737)
+- Update swing handling for Fujitsu A/Cs. (#724)
+- Add function to convert `decode_results` to `sendRaw()` array. (#721)
+- Attempt to reduce heap fragmentation from strings. (#707)
+- Update Fujitsu A/C example code to safer settings (#716)
+- Enforce better `const` usage in IRUtils. (#708)
+- Attempt to reduce heap fragmentation by A/C `toString()`s. (#694)
+- Minor changes to DAIKIN216 timings and features. (#693)
+
+
 ## _v2.6.0 (20190430)_
 
 **[Bug Fixes]**

examples/IRMQTTServer/IRMQTTServer.h

@@ -181,7 +181,7 @@ const uint8_t kPasswordLength = 20;
 // ----------------- End of User Configuration Section -------------------------
 
 // Constants
-#define _MY_VERSION_ "v1.1.1-beta"
+#define _MY_VERSION_ "v1.1.1"
 
 const uint8_t kSendTableSize = sizeof(gpioTable);
 // JSON stuff