[Request]: Only FIRMWARE INFO in the left column

[rashn]

What do you need help with?

What wrong? Only FIRMWARE INFO in the left column.

M503 Response

No response

[cp2004]

And what happens when you press 'Load'?

[rashn]

Reloaded main frame
https://youtube.com/shorts/Mqtg_7G5_uw?feature=share

[cp2004]

In that case, please provide the M503 response (as in the issue form) and also the octoprint.log file.

[rashn]

Send: M503
Recv:   G21    ; Units in mm (mm)
Recv:   M149 C ; Units in Celsius
Recv: 
Recv:   M92 X200.00 Y200.00 Z800.00 E190.00
Recv:   M203 X400.00 Y400.00 Z3.00 E25.00
Recv:   M201 X500.00 Y500.00 Z10.00 E7000.00
Recv:   M204 P600.00 R3000.00 T3000.00
Recv:   M205 B20000.00 S0.00 T0.00 X20.00 Y20.00 Z0.40 E5.00
Recv:   M206 X0.00 Y0.00 Z0.00
Recv:   M420 S1 Z10.00
Recv:   M145 S0 H220 B60 F0
Recv:   M145 S1 H240 B110 F0
Recv:   M301 P22.90 I1.48 D88.50
Recv:   M304 P270.13 I43.25 D421.81
Recv:   M851 Z-1.90
Recv:   M906 X1000 Y1000 Z1050
Recv:   M906 T0 E1000
Recv: 
Recv:   M913 X100 Y100 Z10
Recv:   M913 T0 E30
Recv: 
Recv:   M569 S1 X Y Z
Recv:   M569 S1 T0 E
Recv: ok

[rashn]

octoprint.log

[rashn]

One more things

:

[cp2004]

I will try and test your M503 response at some point and have a proper look in the next week, but everything looks OK to me, the plugin is picking something up but it seems to miss the data presented.

[rashn]

Hello dear friend! Any news about my problem solving?

[cp2004]

I am sorry for the long delay here. I have been busy and forgot about this issue.

The M503 response you have provided tells the story - I have looked again at the required format. There is a missing echo: at the start of the line which is present in mainline Marlin firmware (not forks). I am hesitant to add support for other forks because it will get messy if different people keep changing the format slightly.

Although the firmware info section says 'Source code URL https://github.com/MarlinFirmware/Marlin' I cannot find any evidence of this behaviour in the code there, so this must be a fork of the firmware. Where did you get the firmware on your printer from?

[rashn]

This is clean Marlin-bugfix-2.0.0 version of firmware https://github.com/MarlinFirmware/Marlin

[cp2004]

This is the response I get from the current bugfix-2.1.0 version:

Send: M503
Recv: echo:; Linear Units:
Recv: echo:  G21 ; (mm)
Recv: echo:; Temperature Units:
Recv: echo:  M149 C ; Units in Celsius
Recv: echo:; Filament settings (Disabled):
Recv: echo:  M200 S0 D1.75
Recv: echo:; Steps per unit:
Recv: echo:  M92 X80.00 Y80.00 Z400.00 E500.00
Recv: echo:; Max feedrates (units/s):
Recv: echo:  M203 X300.00 Y300.00 Z5.00 E25.00
Recv: echo:; Max Acceleration (units/s2):
Recv: echo:  M201 X3000.00 Y3000.00 Z100.00 E10000.00
Recv: echo:; Acceleration (units/s2) (P<print-accel> R<retract-accel> T<travel-accel>):
Recv: echo:  M204 P3000.00 R3000.00 T3000.00
Recv: echo:; Advanced (B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> J<junc_dev>):
Recv: echo:  M205 B20000.00 S0.00 T0.00 J0.01
Recv: echo:; Home offset:
Recv: echo:  M206 X0.00 Y0.00 Z0.00
Recv: echo:; Material heatup parameters:
Recv: echo:  M145 S0 H180.00 F0
Recv: echo:  M145 S1 H240.00 F0
Recv: echo:; Hotend PID:
Recv: echo:  M301 P22.20 I1.08 D114.00
Recv: echo:; Retract (S<length> F<feedrate> Z<lift>):
Recv: echo:  M207 S3.00 W13.00 F2700.00 Z0.00
Recv: echo:; Recover (S<length> F<feedrate>):
Recv: echo:  M208 S0.00 W0.00 F480.00
Recv: echo:; Auto-Retract (S<enable>):
Recv: echo:  M209 S0
Recv: echo:; Linear Advance:
Recv: echo:  M900 K0.00
Recv: echo:; Filament load/unload:
Recv: echo:  M603 L0.00 U100.00 ; (mm)
Recv: ok

It is different from yours, with the echo and extra comments. I've never seen a Marlin build that, and when looking at the code I can't see a way that the echo and all of the comments are missed out.

Can you share the source of the build somehow? Did you compile it yourself? Maybe just the Configuration.h and Configuration_adv.h files in a zip will work.

[cp2004]

@rashn do you still need help with this?

[rashn]

marlin.zip
Yes! Still need help. Thank you!

[rubienr]

I observe the same issue with the bugfix-2.1.x branch + EEPRPOM Editor Version 3.3.0. Here an example for echo with extra comment: in M412.cpp in method void GcodeSuite::M412_report(const bool forReplay=true) which results in Recv: echo:; Filament runout sensor:.

The whole output from OctoPrint terminal:

Send: M503
Recv: echo:; Linear Units:
Recv: echo:  G21 ; (mm)
Recv: echo:; Temperature Units:
Recv: echo:  M149 C ; Units in Celsius
Recv: echo:; Filament settings (Disabled):
Recv: echo:  M200 S0
Recv: echo:  M200 T0 D1.75
Recv: echo:  M200 T1 D1.75
Recv: echo:; Steps per unit:
Recv: echo:  M92 X80.00 Y80.00 Z1600.00 E282.16
Recv: echo:; Max feedrates (units/s):
Recv: echo:  M203 X1000.00 Y1000.00 Z8.00 E150.00
Recv: echo:; Max Acceleration (units/s2):
Recv: echo:  M201 X1000.00 Y1000.00 Z15.00 E35000.00
Recv: echo:; Acceleration (units/s2) (P<print-accel> R<retract-accel> T<travel-accel>):
Recv: echo:  M204 P600.00 R1000.00 T1000.00
Recv: echo:; Advanced (B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> J<junc_dev>):
Recv: echo:  M205 B20000.00 S0.00 T0.00 J0.01
Recv: echo:; Home offset:
Recv: echo:  M206 X0.00 Y0.00 Z0.00
Recv: echo:; Hotend offsets:
Recv: echo:echo:  M218 T1 X-41.00 Y0.00 Z0.000
Recv: echo:; Unified Bed Leveling:
Recv: echo:  M420 S1 Z10.00 ; Leveling ON
Recv: 
Recv: Unified Bed Leveling System v1.01 active
Recv: echo:Active Mesh Slot 0
Recv: echo:EEPROM can hold 15 meshes.
Recv: 
Recv: echo:; Servo Angles:
Recv: echo:echo:  M281 P1 L140 U55
Recv: echo:; Z Auto-Align:
Recv: echo:  M422 S1 X8.00 Y185.00
Recv: echo:  M422 S2 X369.00 Y185.00
Recv: echo:; Material heatup parameters:
Recv: echo:  M145 S0 H180.00 B70.00 F0
Recv: echo:  M145 S1 H240.00 B110.00 F0
Recv: echo:; Bed PID:
Recv: echo:  M304 P200.62 I34.83 D770.37
Recv: echo:; Controller Fan:
Recv: echo:  M710 S191 I0 A1 D30 ; (74% 0%)
Recv: echo:; Retract (S<length> F<feedrate> Z<lift>):
Recv: echo:  M207 S1.00 W20.00 F1200.00 Z0.00
Recv: echo:; Recover (S<length> F<feedrate>):
Recv: echo:  M208 S0.00 W0.13 F9000.00
Recv: echo:; Auto-Retract (S<enable>):
Recv: echo:  M209 S0
Recv: echo:; Z-Probe Offset:
Recv: echo:  M851 X-20.50 Y55.50 Z-2.50 ; (mm)
Recv: echo:; Stepper driver current:
Recv: echo:  M906 X1500 Y2000 Z800
Recv: echo:  M906 I1 Z800
Recv: echo:  M906 T0 E1200
Recv: echo:  M906 T1 E1200
Recv: echo:; Hybrid Threshold:
Recv: echo:  M913 X2470 Y1098 Z494
Recv: echo:  M913 I2 Z494
Recv: echo:  M913 T0 E90
Recv: echo:  M913 T1 E90
Recv: 
Recv: echo:; Driver stepping mode:
Recv: echo:  M569 S1 X Y Z
Recv: echo:  M569 S1 I1 Z
Recv: echo:  M569 S1 T0 E
Recv: echo:  M569 S1 T1 E
Recv: echo:; Linear Advance:
Recv: echo:  M900 K0.10
Recv: echo:; Filament load/unload:
Recv: echo:  M603 T0 L2.00 U0.00 ; (mm)
Recv: echo:  M603 T1 L2.00 U0.00 ; (mm)
Recv: echo:; Tool-changing:
Recv: echo:  M217 Z2.00
Recv: echo:; Filament runout sensor:
Recv: echo:  M412 S1 ; Sensor ON
Recv: echo:; Model predictive control:
Recv: echo:  M306 E0 P40.00 C16.43 R0.1404 A0.0752 F0.1210 H0.0056
Recv: echo:  M306 E1 P40.00 C16.51 R0.2082 A0.0805 F0.0823 H0.0056
Recv: ok P15 B7