Code4i
Failing to connect #2176
-
|
I have codefori installed on my system and it was working. I have not used this system for months and now need to use it again. When I try to log on, it fails with "check your credentials (All configured authentication methods failed. I do not remember how I configured the connection. Am I using a password or a private key? I changed the password and tried that, but it failed. I don't know if I used a private key. Anyway, how can I reset it and get it working again? Thank you, |
Beta Was this translation helpful? Give feedback.
Replies: 2 comments
-
|
@a4ginatl You can remove all stored credentials (password + path of private key) on the connection by right-click and choose
Another troubleshooting step is to use another SSH client, e.g. PuTTY, to try the login with manually entered credentials... |
Beta Was this translation helpful? Give feedback.
-
|
Thank you. I connected.
Darryl Freinkel
A4G
Telephone: 770.321.8562
From: Christian Jorgensen ***@***.***>
Sent: Thursday, July 18, 2024 2:51 AM
To: codefori/vscode-ibmi ***@***.***>
Cc: a4ginatl ***@***.***>; Mention ***@***.***>
Subject: Re: [codefori/vscode-ibmi] Failing to connect (Discussion #2176)
@a4ginatl <https://github.com/a4ginatl> You can remove all stored credentials (password + path of private key) on the connection by right-click and choose Login Settings and click the button Remove auth methods at the bottom of the panel:
billede.png (view on web) <https://github.com/user-attachments/assets/7ad716fc-bf8a-4158-a5ec-ccb4c5308931>
Another troubleshooting step is to use another SSH client, e.g. PuTTY <https://www.chiark.greenend.org.uk/~sgtatham/putty/> , to try the login with manually entered credentials...
—
Reply to this email directly, view it on GitHub <#2176 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/A4EMVLZYN4HAJ4L3Y7JBVA3ZM5QV7AVCNFSM6AAAAABLBO7QAWVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAMBYGA3TQMY> .
You are receiving this because you were mentioned. <https://github.com/notifications/beacon/A4EMVL46GQPU7H4NRN2CWRLZM5QV7A5CNFSM6AAAAABLBO7QAWWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQATHJA6.gif> Message ID: ***@***.*** ***@***.***> >
|
Beta Was this translation helpful? Give feedback.
@a4ginatl You can remove all stored credentials (password + path of private key) on the connection by right-click and choose
Login Settingsand click the buttonRemove auth methodsat the bottom of the panel:Another troubleshooting step is to use another SSH client, e.g. PuTTY, to try the login with manually entered credentials...