gps.xml

<?xml version="1.0" encoding="utf-8"?>
<glgps xmlns="http://www.glpals.com/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.glpals.com/ glconfig.xsd" >
  <!--HAL Confguration  -->
  <hal 
	   acPortName="/dev/ttyHS0" lBaudRate="115200" cLogEnableInitState="false" cLogEnabled="true" acLogDirectory="/data/gps/log/" ltoFileName="lto2.dat" 
       enhanced-assisted="false" cp-enhanced-assisted="true" TISEnabled="false" RILEnabled="false" LPmode="false" cp-cold-start="false" cp-guard-time-sec="1"
       arp-supl-enable="true" arp-supl-cap-msb="true" arp-supl-cap-msa="true" arp-supl-cap-ecid="false"
	   acSuplServer="supl.google.com" SuplPort="7276" arp-supl-use-apn="false"
       LbsEnable="true" LbsLocal="false" LbsServer="bcmls2.glpals.com" LbsPort="7275" LbsSyncLto="true" LbsSyncCells="true" LbsWlanEnable="false"       
       LbsSyncLtoThresholdDays="3"
       gpioNStdbyPath="/sys/class/sec/gps/pwr_en"
       gpioNResetPath="/sys/class/sec/gps/nrst"
       gpioDelayMs="250"
       lcsApiSockName="/dev/socket/gps"
       acNvStoDir="/data/gps/"
       arp-supl-ssl-method="SSLv3"
       />

  <!-- Parameters passed to GlEngine   -->
  <!--gll
         LogPriMask="LOG_DEBUG"
         LogFacMask="LOG_GLLAPI | LOG_DEVIA | LOG_NMEA | LOG_RAWDATA | LOG_DEVMS | LOG_ASIC_IO | LOG_BBTEST | LOG_DEVET | LOG_MESM | LOG_DEVKF | LOG_DEVJG | LOG_DEVMR" 
         FrqPlan="FRQ_PLAN_10MHZ_2PPM_10MHZ_100PPB" FrqPlan="FRQ_PLAN_10MHZ_2PPM" "FRQ_PLAN_16_8MHZ_2PPM"
         RfType="GL_RF_PALS7" "GL_RF_BARRACUDA" "GL_RF_2075_LN22" "GL_RF_2075_BRCM" "GL_RF_PALS7_BRCM" "GL_RF_BARRACUDA_BRCM" "GL_RF_BARRACUDA_EXT_LNA"
         NOTE: "GL_RF_BARRACUDA_EXT_LNA" should be used for BAS
         LbsEnable="true" LbsLocal="true" LbsServer="bcmlbsqa1.glpals.com" LbsPort="7275" LbsSyncTimeSec = "60" LbsSyncLto="true" LbsSyncCells="true"
  /-->

  <!-- NOTE: BrcmRFwildBase, BrcmRFclkDiv, anBrcmRFclkRefHz only needed for Broadcom RF front end test chips
            ( i.e. GL_RF_2075_BRCM and GL_RF_PALS7_BRCM ) -->

  <gll 
       LogPriMask="LOG_INFO"
       LogFacMask="LOG_GLLAPI | LOG_NMEA | LOG_RAWDATA"
       FrqPlan="FRQ_PLAN_26MHZ_2PPM"   
       RfType="GL_RF_4751_DANUBE_EXT_LNA"
       WarmStandbyTimeout1Seconds="10"
       WarmStandbyTimeout2Seconds="15"
    >   
  </gll>
</glgps>