Releases: ciribob/DCS-SimpleRadioStandalone
Release 2.1.0.0
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- Adds support for Mode 2 for the F15E and Mirage. Huge huge thank you to RAZBAM for making this possible! Note: Mode 2 will not be sent to LotATC until the SRS server is updated. All other modes will work as before regardless
- Removed Ambient cockpit effect on intercom
- Reduced Ambient cockpit effect over MIDS - thanks for the feedback!
- Added support for MIDS on the AWACS overlay using a custom AWACS json ( awacs-radios-custom.json or editing awacs-radios.json directly). More details on the SRS Discord
- Added support to send Mode 2 to LotATC
- Changed the auto-updater logic in the SRS client to only update SRS once DCS is closed automatically
- Added a check to the SRS-Autoupdater to block the update until DCS is closed as well
- Fixed LotATC being sent transponder codes when the transponder was disabled on the client
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. Ports must be opened manually using Port Forwarding or similar techniques.
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
What's Changed
Full Changelog: https://github.com/ciribob/DCS-SimpleRadioStandalone/compare/2.0.9.1..2.1.0.0
Release 2.0.9.1
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- Experimental ambient audio effects - Requires servers to update to this version for clients to hear the new effects. This can be disabled by clients and volume also reduced by clients
- F15E Intercom hot mic support
- Intercom hot mic logic changed to allow intercom hot mic to work even if "always allow SRS Hotkeys" is enabled. To disable the hot mic in supported aircraft use the relevant switch in the cockpit
- Fix for F15E controls from the 2.0.9.0 beta
- Additional logging on the server thanks to @mousepilot
- Fix for FC3 aircraft - if they wont work download this update again using the autoupdater
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. Ports must be opened manually using Port Forwarding or similar techniques.
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
What's Changed
Full Changelog: https://github.com/ciribob/DCS-SimpleRadioStandalone/compare/2.0.8.8..2.0.9.1
Contributors
Assets 4
BETA Release 2.0.9.0
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- Experimental ambient audio effects - Requires servers to update to this version for clients to hear the new effects. This can be disabled by clients and volume also reduced by clients
- F15E Intercom hot mic
- Intercom hot mic logic changed to allow intercom hot mic to work even if "always allow SRS Hotkeys" is enabled
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. The server tries to open the ports using UPNP
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
What's Changed
Full Changelog: https://github.com/ciribob/DCS-SimpleRadioStandalone/compare/2.0.8.8..2.0.9.0
2.0.8.8
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- Improvements to AM blocking effect
- M2000C improvements to IFF / Transponder panel thanks to Razbam
- Added support for F1BE
- Fixed volume controls on F15E
- Changed Viggen volume control to apply to the primary radio instead
- Cockpit PTT controls for Apache
- Cockpit PTT controls for P47
- Cockpit PTT controls for BF109
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. The server tries to open the ports using UPNP
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
What's Changed
Full Changelog: 2.0.8.7...2.0.8.8
Release 2.0.8.7
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- UH-60L ARC-201 Frequency scanning thanks to @sniporbob
- A-10C / A-10C II cockpit PTT support added back thanks to @LupusTheCanine (Use ED VOIP binds to trigger). You will need to enable always allow SRS hotkeys if you dont want to use cockpit controls 👍
- UH60-L SINCGARS support thanks to @sniporbob . SINCGARS will not work unless the SRS server and all clients are updated
- SA342 - Added support for the disable hot mic DCS option thanks to @gcask
- Localization of SRS into Chinese - thanks to @omltcat
- Added support for the SH60B mod thanks to @ANDR0ID-DCS
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. The server tries to open the ports using UPNP
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
What's Changed
Full Changelog: 2.0.8.6...2.0.8.7
Contributors
Assets 4
Release 2.0.8.6
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- Fixed support for Hercules mod radio! Thanks to @gcask
- Added support for the new Gazelle changes. Well done Polychop!
- Added Gazelle Transponder / IFF panel now its clickable - again thanks Polychop for making it interactive!
- Added In Cockpit Volume control for FW190 (both variants)
- Added In Cockpit Volume control for Viggen for one radio (other radio doesn't have a knob)
- Fix for possible race condition when multiple autoconnect messages are sent in quick succession (under 1 second). This may fix the annoying bug some experience where you disconnect every 10 minutes from SRS
- Possible fix for crash when mouse wheel was used on the AWACS panel intercom spinner
- Fix for Mirage F1 IFF panel showing incorrect values
- Basic support for the F15E upcoming module. Thanks to RAZBAM for this!
- Added support for M2000D mod
- Fix for crash when other non text files matched the name of the radio (thanks for the report on this!)
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. The server tries to open the ports using UPNP
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
Contributors
Assets 4
Release 2.0.8.5
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- Added support for Hercules mod radio! Thanks to @gcask
- Added support for co-pilot cockpit controls and gazelle minor rework thanks to @gcask
- Fixes and updates for UH-60 Mod (also requires you to update the UH-60 mod) thanks to @ANDR0ID-DCS and @sniporbob
- Reworked recording - there is now "dead air" so you can match up your recordings with Tacview again. Huge thanks to @ilominar
- Re-added support for the AutoConnectGameGUI to auto detect the server IP - thanks to @HappyGnome . You will need to update your AutoConnectGameGUI.lua manually
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. The server tries to open the ports using UPNP
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
Contributors
Assets 4
Release 2.0.8.4
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- Added support for:
- A10C 2 - new Radio! AM / FM support and encryption
- F-16D_50_NS
- F-16D_52_NS
- F-16D_50
- F-16D_52
- F-16D_Barak_40
- F-16D_Barak_30
- F-16I
- VSN_F4C
- VSN_F4B
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. The server tries to open the ports using UPNP
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
Release 2.0.8.3
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- Fixed support for the optional custom awacs-radios-custom.json
- Fixed rounding error meaning you couldn't set 30FM in fixed frequency files (or any on the limit)
- Added support for:
- FA-18E
- FA-18F
- EA-18G
- MH-60R
- F1EE
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. The server tries to open the ports using UPNP
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
Release 2.0.8.2
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- Completely rewritten audio pipeline
- Recording feature updated to support the new audio pipeline
- Support for new advanced radio effects - AM blocking tone and FM "picketing"
- FM picketing will jump between FM signals at random when multiple are received on a single radio
- AM blocking tone will apply if more than 1 transmission is received on an AM radio - or for HAVEQUICK (HQ) if more than 2 are received.
- For the advanced radio effects IRL Radio Rx Effects must be enabled by the server!
- Basic support for the SK60 mod
- Small bug fix with control binding thanks to @FlisherOfatale
- Background support for Xbox controls added thanks to @gcask
- Indication of recording opt-in status on the player list. R indicates they've opted in to be recorded
- Support for a custom awacs-radios-custom.json - this will persist between installs allowing you to make your own radio JSON for EAM and not have to re-create it each update
- Less bugs (hopefully)!
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. The server tries to open the ports using UPNP
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
