sync_test.go

package neutrino_test

import (
	"bytes"
	"encoding/hex"
	"fmt"
	"io"
	"io/ioutil"
	"os"
	"reflect"
	"runtime"
	"strings"
	"sync"
	"testing"
	"time"

	"github.com/btcsuite/btcd/btcec"
	"github.com/btcsuite/btcd/btcjson"
	"github.com/btcsuite/btcd/chaincfg"
	"github.com/btcsuite/btcd/chaincfg/chainhash"
	"github.com/btcsuite/btcd/integration/rpctest"
	"github.com/btcsuite/btcd/rpcclient"
	"github.com/btcsuite/btcd/txscript"
	"github.com/btcsuite/btcd/wire"
	"github.com/btcsuite/btclog"
	"github.com/btcsuite/btcutil"
	"github.com/btcsuite/btcutil/gcs/builder"
	"github.com/btcsuite/btcwallet/wallet/txauthor"
	"github.com/btcsuite/btcwallet/walletdb"
	_ "github.com/btcsuite/btcwallet/walletdb/bdb"
	"github.com/lightninglabs/neutrino"
	"github.com/lightninglabs/neutrino/banman"
	"github.com/lightninglabs/neutrino/headerfs"
)

var (
	// Try btclog.LevelInfo for output like you'd see in normal operation,
	// or btclog.LevelTrace to help debug code. Anything but
	// btclog.LevelOff turns on log messages from the tests themselves as
	// well. Keep in mind some log messages may not appear in order due to
	// use of multiple query goroutines in the tests.
	logLevel    = btclog.LevelOff
	syncTimeout = 30 * time.Second
	syncUpdate  = time.Second

	dbOpenTimeout = time.Second * 10

	// Don't set this too high for your platform, or the tests will miss
	// messages.
	// TODO: Make this a benchmark instead.
	// TODO: Implement load limiting for both outgoing and incoming
	// messages.
	numQueryThreads = 20
	queryOptions    = []neutrino.QueryOption{}

	// The logged sequence of events we want to see. The value of i
	// represents the block for which a loop is generating a log entry,
	// given for readability only.
	// "bc":	OnBlockConnected
	// "fc" xx:	OnFilteredBlockConnected with xx (uint8) relevant TXs
	// "rv":	OnRecvTx
	// "rd":	OnRedeemingTx
	// "bd":	OnBlockDisconnected
	// "fd":	OnFilteredBlockDisconnected
	wantLog = func() (log []byte) {
		for i := 1096; i <= 1100; i++ {
			// FilteredBlockConnected
			log = append(log, []byte("fc")...)
			// 0 relevant TXs
			log = append(log, 0x00)
			// BlockConnected
			log = append(log, []byte("bc")...)
		}
		// Block with one relevant (receive) transaction
		log = append(log, []byte("rvfc")...)
		log = append(log, 0x01)
		log = append(log, []byte("bc")...)
		// 124 blocks with nothing
		for i := 1102; i <= 1225; i++ {
			log = append(log, []byte("fc")...)
			log = append(log, 0x00)
			log = append(log, []byte("bc")...)
		}
		// Block with 1 redeeming transaction
		log = append(log, []byte("rdfc")...)
		log = append(log, 0x01)
		log = append(log, []byte("bc")...)
		// Block with nothing
		log = append(log, []byte("fc")...)
		log = append(log, 0x00)
		log = append(log, []byte("bc")...)
		// Update with rewind - rewind back to 1095, add another address,
		// and see more interesting transactions.
		for i := 1227; i >= 1096; i-- {
			// BlockDisconnected and FilteredBlockDisconnected
			log = append(log, []byte("bdfd")...)
		}
		// Forward to 1100
		for i := 1096; i <= 1100; i++ {
			// FilteredBlockConnected
			log = append(log, []byte("fc")...)
			// 0 relevant TXs
			log = append(log, 0x00)
			// BlockConnected
			log = append(log, []byte("bc")...)
		}
		// Block with two relevant (receive) transactions
		log = append(log, []byte("rvrvfc")...)
		log = append(log, 0x02)
		log = append(log, []byte("bc")...)
		// 124 blocks with nothing
		for i := 1102; i <= 1225; i++ {
			log = append(log, []byte("fc")...)
			log = append(log, 0x00)
			log = append(log, []byte("bc")...)
		}
		// 2 blocks with 1 redeeming transaction each
		for i := 1226; i <= 1227; i++ {
			log = append(log, []byte("rdfc")...)
			log = append(log, 0x01)
			log = append(log, []byte("bc")...)
		}
		// Block with nothing
		log = append(log, []byte("fc")...)
		log = append(log, 0x00)
		log = append(log, []byte("bc")...)
		// 3 block rollback
		for i := 1228; i >= 1226; i-- {
			log = append(log, []byte("fdbd")...)
		}
		// 1 block reorg with 2 redeeming transactions
		log = append(log, []byte("rdrdfc")...)
		log = append(log, 0x02)
		log = append(log, []byte("bc")...)
		// 4 block empty reorg
		for i := 1227; i <= 1230; i++ {
			log = append(log, []byte("fc")...)
			log = append(log, 0x00)
			log = append(log, []byte("bc")...)
		}
		// 5 block rollback
		for i := 1230; i >= 1226; i-- {
			log = append(log, []byte("fdbd")...)
		}
		// 2 blocks with 1 redeeming transaction each
		for i := 1226; i <= 1227; i++ {
			log = append(log, []byte("rdfc")...)
			log = append(log, 0x01)
			log = append(log, []byte("bc")...)
		}
		// 8 block rest of reorg
		for i := 1228; i <= 1235; i++ {
			log = append(log, []byte("fc")...)
			log = append(log, 0x00)
			log = append(log, []byte("bc")...)
		}
		return log
	}()

	// rescanMtx locks all the variables to which the rescan goroutine's
	// notifications write.
	rescanMtx sync.RWMutex

	// gotLog is where we accumulate the event log from the rescan. Then we
	// compare it to wantLog to see if the series of events the rescan saw
	// happened as expected.
	gotLog []byte

	// curBlockHeight lets the rescan goroutine track where it thinks the
	// chain is based on OnBlockConnected and OnBlockDisconnected.
	curBlockHeight int32

	// curFilteredBlockHeight lets the rescan goroutine track where it
	// thinks the chain is based on OnFilteredBlockConnected and
	// OnFilteredBlockDisconnected.
	curFilteredBlockHeight int32

	// ourKnownTxsByBlock lets the rescan goroutine keep track of
	// transactions we're interested in that are in the blockchain we're
	// following as signalled by OnBlockConnected, OnBlockDisconnected,
	// OnRecvTx, and OnRedeemingTx.
	ourKnownTxsByBlock = make(map[chainhash.Hash][]*btcutil.Tx)

	// ourKnownTxsByFilteredBlock lets the rescan goroutine keep track of
	// transactions we're interested in that are in the blockchain we're
	// following as signalled by OnFilteredBlockConnected and
	// OnFilteredBlockDisconnected.
	ourKnownTxsByFilteredBlock = make(map[chainhash.Hash][]*btcutil.Tx)
)

// secSource is an implementation of btcwallet/txauthor/SecretsSource that
// stores WitnessPubKeyHash addresses.
type secSource struct {
	keys    map[string]*btcec.PrivateKey
	scripts map[string]*[]byte
	params  *chaincfg.Params
}

func (s *secSource) add(privKey *btcec.PrivateKey) (btcutil.Address, error) {
	pubKeyHash := btcutil.Hash160(privKey.PubKey().SerializeCompressed())
	addr, err := btcutil.NewAddressWitnessPubKeyHash(pubKeyHash, s.params)
	if err != nil {
		return nil, err
	}
	script, err := txscript.PayToAddrScript(addr)
	if err != nil {
		return nil, err
	}
	s.keys[addr.String()] = privKey
	s.scripts[addr.String()] = &script
	_, addrs, _, err := txscript.ExtractPkScriptAddrs(script, s.params)
	if err != nil {
		return nil, err
	}
	if addrs[0].String() != addr.String() {
		return nil, fmt.Errorf("Encoded and decoded addresses don't "+
			"match. Encoded: %s, decoded: %s", addr, addrs[0])
	}
	return addr, nil
}

// GetKey is required by the txscript.KeyDB interface.
func (s *secSource) GetKey(addr btcutil.Address) (*btcec.PrivateKey, bool,
	error) {
	privKey, ok := s.keys[addr.String()]
	if !ok {
		return nil, true, fmt.Errorf("No key for address %s", addr)
	}
	return privKey, true, nil
}

// GetScript is required by the txscript.ScriptDB interface.
func (s *secSource) GetScript(addr btcutil.Address) ([]byte, error) {
	script, ok := s.scripts[addr.String()]
	if !ok {
		return nil, fmt.Errorf("No script for address %s", addr)
	}
	return *script, nil
}

// ChainParams is required by the SecretsSource interface
func (s *secSource) ChainParams() *chaincfg.Params {
	return s.params
}

func newSecSource(params *chaincfg.Params) *secSource {
	return &secSource{
		keys:    make(map[string]*btcec.PrivateKey),
		scripts: make(map[string]*[]byte),
		params:  params,
	}
}

type neutrinoHarness struct {
	h1, h2, h3 *rpctest.Harness
	svc        *neutrino.ChainService
}

type syncTestCase struct {
	name string
	test func(harness *neutrinoHarness, t *testing.T)
}

var testCases = []*syncTestCase{
	{
		name: "initial sync",
		test: testInitialSync,
	},
	{
		name: "one-shot rescan",
		test: testRescan,
	},
	{
		name: "start long-running rescan",
		test: testStartRescan,
	},
	{
		name: "test blocks and filters in random order",
		test: testRandomBlocks,
	},
	{
		name: "check long-running rescan results",
		test: testRescanResults,
	},
}

// Make sure the client synchronizes with the correct node.
func testInitialSync(harness *neutrinoHarness, t *testing.T) {
	err := waitForSync(t, harness.svc, harness.h1)
	if err != nil {
		t.Fatalf("Couldn't sync ChainService: %s", err)
	}
}

// Variables used to track state between multiple rescan tests.
var (
	quitRescan                chan struct{}
	errChan                   <-chan error
	rescan                    *neutrino.Rescan
	startBlock                headerfs.BlockStamp
	secSrc                    *secSource
	addr1, addr2, addr3       btcutil.Address
	script1, script2, script3 []byte
	tx1, tx2                  *wire.MsgTx
	ourOutPoint               wire.OutPoint
)

// testRescan tests several rescan modes. This should be broken up into
// smaller tests.
func testRescan(harness *neutrinoHarness, t *testing.T) {
	// Generate an address and send it some coins on the h1 chain. We use
	// this to test rescans and notifications.
	modParams := harness.svc.ChainParams()
	secSrc = newSecSource(&modParams)

	newPkScript := func() (btcutil.Address, []byte, *wire.TxOut) {
		t.Helper()

		privKey, err := btcec.NewPrivateKey(btcec.S256())
		if err != nil {
			t.Fatalf("Couldn't generate private key: %s", err)
		}
		addr, err := secSrc.add(privKey)
		if err != nil {
			t.Fatalf("Couldn't create address from key: %s", err)
		}
		script, err := secSrc.GetScript(addr)
		if err != nil {
			t.Fatalf("Couldn't create script from address: %s", err)
		}
		return addr, script, &wire.TxOut{
			PkScript: script,
			Value:    1000000000,
		}
	}

	createTx := func(txOuts ...*wire.TxOut) *wire.MsgTx {
		t.Helper()

		// Fee rate is satoshis per byte
		tx, err := harness.h1.CreateTransaction(
			txOuts, 1000, true,
		)
		if err != nil {
			t.Fatalf("Couldn't create transaction from script: %s", err)
		}
		_, err = harness.h1.Node.SendRawTransaction(tx, true)
		if err != nil {
			t.Fatalf("Unable to send raw transaction to node: %s", err)
		}
		return tx
	}

	var out1, out2 *wire.TxOut

	// Avoid zero-values with a dummy index at vout 0.
	_, _, out0 := newPkScript()
	addr1, script1, out1 = newPkScript()
	tx1 = createTx(out0, out1)

	addr2, script2, out2 = newPkScript()
	tx2 = createTx(out2)

	blockHashes, err := harness.h1.Node.Generate(1)
	if err != nil {
		t.Fatalf("Couldn't generate/submit block: %s", err)
	}
	err = waitForSync(t, harness.svc, harness.h1)
	if err != nil {
		t.Fatalf("Couldn't sync ChainService: %s", err)
	}

	ourOutPoint = wire.OutPoint{
		Hash:  tx1.TxHash(),
		Index: 1,
	}
	spendReport, err := harness.svc.GetUtxo(
		neutrino.WatchInputs(neutrino.InputWithScript{
			PkScript: script1,
			OutPoint: ourOutPoint,
		}),
		neutrino.StartBlock(&headerfs.BlockStamp{Height: 1101}),
	)
	if err != nil {
		t.Fatalf("Couldn't get UTXO %s: %s", ourOutPoint, err)
	}
	if !bytes.Equal(spendReport.Output.PkScript, script1) {
		t.Fatalf("UTXO's script doesn't match expected script for %s",
			ourOutPoint)
	}
	if *spendReport.BlockHash != *blockHashes[0] {
		t.Fatalf("UTXO's block hash is wrong")
	}
	if spendReport.BlockHeight == 0 {
		t.Fatalf("UTXO's block height field not set")
	}
	if spendReport.BlockIndex < 1 || spendReport.BlockIndex > 2 {
		t.Fatalf("UTXO at unexpeced block index %d", spendReport.BlockIndex)
	}
}

func testStartRescan(harness *neutrinoHarness, t *testing.T) {
	// Start a rescan with notifications in another goroutine. We'll kill
	// it with a quit channel at the end and make sure we got the expected
	// results.
	quitRescan = make(chan struct{})
	startBlock = headerfs.BlockStamp{Height: 1095}
	rescan, errChan = startRescan(t, harness.svc, addr1, &startBlock,
		quitRescan)
	err := waitForSync(t, harness.svc, harness.h1)
	if err != nil {
		checkErrChan(t, errChan)
		t.Fatalf("Couldn't sync ChainService: %s", err)
	}
	numTXs, _, err := checkRescanStatus()
	if err != nil {
		checkErrChan(t, errChan)
		t.Fatalf("Checking rescan status failed: %s", err)
	}
	if numTXs != 1 {
		t.Fatalf("Wrong number of relevant transactions. Want: 1, got:"+
			" %d", numTXs)
	}

	// Generate 124 blocks on h1 to make sure it reorgs the other nodes.
	// Ensure the ChainService instance stays caught up.
	harness.h1.Node.Generate(124)
	err = waitForSync(t, harness.svc, harness.h1)
	if err != nil {
		checkErrChan(t, errChan)
		t.Fatalf("Couldn't sync ChainService: %s", err)
	}

	// Connect/sync/disconnect h2 to make it reorg to the h1 chain.
	err = csd([]*rpctest.Harness{harness.h1, harness.h2})
	if err != nil {
		checkErrChan(t, errChan)
		t.Fatalf("Couldn't sync h2 to h1: %s", err)
	}

	// Spend the outputs we sent ourselves over two blocks.
	inSrc := func(tx wire.MsgTx) func(target btcutil.Amount) (
		total btcutil.Amount, inputs []*wire.TxIn,
		inputValues []btcutil.Amount, scripts [][]byte, err error) {
		ourIndex := 1 << 30 // Should work on 32-bit systems
		for i, txo := range tx.TxOut {
			if bytes.Equal(txo.PkScript, script1) ||
				bytes.Equal(txo.PkScript, script2) {
				ourIndex = i
			}
		}
		return func(target btcutil.Amount) (total btcutil.Amount,
			inputs []*wire.TxIn, inputValues []btcutil.Amount,
			scripts [][]byte, err error) {
			if ourIndex == 1<<30 {
				err = fmt.Errorf("Couldn't find our address " +
					"in the passed transaction's outputs.")
				return
			}
			total = target
			inputs = []*wire.TxIn{
				{
					PreviousOutPoint: wire.OutPoint{
						Hash:  tx.TxHash(),
						Index: uint32(ourIndex),
					},
				},
			}
			inputValues = []btcutil.Amount{
				btcutil.Amount(tx.TxOut[ourIndex].Value)}
			scripts = [][]byte{tx.TxOut[ourIndex].PkScript}
			err = nil
			return
		}
	}

	// Create another address to send to so we don't trip the rescan with
	// the old address and we can test monitoring both OutPoint usage and
	// receipt by addresses.
	privKey3, err := btcec.NewPrivateKey(btcec.S256())
	if err != nil {
		t.Fatalf("Couldn't generate private key: %s", err)
	}
	addr3, err = secSrc.add(privKey3)
	if err != nil {
		t.Fatalf("Couldn't create address from key: %s", err)
	}
	script3, err = secSrc.GetScript(addr3)
	if err != nil {
		t.Fatalf("Couldn't create script from address: %s", err)
	}
	out3 := wire.TxOut{
		PkScript: script3,
		Value:    500000000,
	}
	// Spend the first transaction and mine a block.
	authTx1, err := txauthor.NewUnsignedTransaction(
		[]*wire.TxOut{
			&out3,
		},
		// Fee rate is satoshis per kilobyte
		1024000,
		inSrc(*tx1),
		func() ([]byte, error) {
			return script3, nil
		},
	)
	if err != nil {
		t.Fatalf("Couldn't create unsigned transaction: %s", err)
	}
	err = authTx1.AddAllInputScripts(secSrc)
	if err != nil {
		t.Fatalf("Couldn't sign transaction: %s", err)
	}
	banPeer(t, harness.svc, harness.h2)
	err = harness.svc.SendTransaction(authTx1.Tx)
	if err != nil && !strings.Contains(err.Error(), "already have") {
		t.Fatalf("Unable to send transaction to network: %s", err)
	}
	_, err = harness.h1.Node.Generate(1)
	if err != nil {
		t.Fatalf("Couldn't generate/submit block: %s", err)
	}
	err = waitForSync(t, harness.svc, harness.h1)
	if err != nil {
		checkErrChan(t, errChan)
		t.Fatalf("Couldn't sync ChainService: %s", err)
	}
	numTXs, _, err = checkRescanStatus()
	if err != nil {
		checkErrChan(t, errChan)
		t.Fatalf("Checking rescan status failed: %s", err)
	}
	if numTXs != 2 {
		t.Fatalf("Wrong number of relevant transactions. Want: 2, got:"+
			" %d", numTXs)
	}
	// Spend the second transaction and mine a block.
	authTx2, err := txauthor.NewUnsignedTransaction(
		[]*wire.TxOut{
			&out3,
		},
		// Fee rate is satoshis per kilobyte
		1024000,
		inSrc(*tx2),
		func() ([]byte, error) {
			return script3, nil
		},
	)
	if err != nil {
		t.Fatalf("Couldn't create unsigned transaction: %s", err)
	}
	err = authTx2.AddAllInputScripts(secSrc)
	if err != nil {
		t.Fatalf("Couldn't sign transaction: %s", err)
	}
	banPeer(t, harness.svc, harness.h2)
	err = harness.svc.SendTransaction(authTx2.Tx)
	if err != nil && !strings.Contains(err.Error(), "already have") {
		t.Fatalf("Unable to send transaction to network: %s", err)
	}
	_, err = harness.h1.Node.Generate(1)
	if err != nil {
		t.Fatalf("Couldn't generate/submit block: %s", err)
	}
	err = waitForSync(t, harness.svc, harness.h1)
	if err != nil {
		checkErrChan(t, errChan)
		t.Fatalf("Couldn't sync ChainService: %s", err)
	}
	numTXs, _, err = checkRescanStatus()
	if err != nil {
		checkErrChan(t, errChan)
		t.Fatalf("Checking rescan status failed: %s", err)
	}
	if numTXs != 2 {
		t.Fatalf("Wrong number of relevant transactions. Want: 2, got:"+
			" %d", numTXs)
	}

	// Update the filter with the second address, and we should have 2 more
	// relevant transactions.
	err = rescan.Update(neutrino.AddAddrs(addr2), neutrino.Rewind(1095))
	if err != nil {
		t.Fatalf("Couldn't update the rescan filter: %s", err)
	}
	err = waitForSync(t, harness.svc, harness.h1)
	if err != nil {
		checkErrChan(t, errChan)
		t.Fatalf("Couldn't sync ChainService: %s", err)
	}
	numTXs, _, err = checkRescanStatus()
	if err != nil {
		checkErrChan(t, errChan)
		t.Fatalf("Checking rescan status failed: %s", err)
	}
	if numTXs != 4 {
		t.Fatalf("Wrong number of relevant transactions. Want: 4, got:"+
			" %d", numTXs)
	}

	// Generate a block with a nonstandard coinbase to generate a basic
	// filter with 0 entries.
	_, err = harness.h1.GenerateAndSubmitBlockWithCustomCoinbaseOutputs(
		[]*btcutil.Tx{}, rpctest.BlockVersion, time.Time{},
		[]wire.TxOut{{
			Value:    0,
			PkScript: []byte{},
		}})
	if err != nil {
		t.Fatalf("Couldn't generate/submit block: %s", err)
	}
	err = waitForSync(t, harness.svc, harness.h1)
	if err != nil {
		checkErrChan(t, errChan)
		t.Fatalf("Couldn't sync ChainService: %s", err)
	}

	// Check and make sure the previous UTXO is now spent.
	spendReport, err := harness.svc.GetUtxo(
		neutrino.WatchInputs(neutrino.InputWithScript{
			PkScript: script1,
			OutPoint: ourOutPoint,
		}),
		neutrino.StartBlock(&headerfs.BlockStamp{Height: 801}),
	)
	if err != nil {
		t.Fatalf("Couldn't get UTXO %s: %s", ourOutPoint, err)
	}
	if spendReport.SpendingTx == nil {
		t.Fatalf("Unable to find initial transaction")
	}
	if spendReport.SpendingTx.TxHash() != authTx1.Tx.TxHash() {
		t.Fatalf("Redeeming transaction doesn't match expected "+
			"transaction: want %s, got %s", authTx1.Tx.TxHash(),
			spendReport.SpendingTx.TxHash())
	}
}

func fetchPrevInputScripts(block *wire.MsgBlock, client *rpctest.Harness) ([][]byte, error) {
	var inputScripts [][]byte
	for i, tx := range block.Transactions {
		if i == 0 {
			continue
		}

		for _, txIn := range tx.TxIn {
			prevTxHash := txIn.PreviousOutPoint.Hash

			prevTx, err := client.Node.GetRawTransaction(&prevTxHash)
			if err != nil {
				return nil, err
			}

			prevIndex := txIn.PreviousOutPoint.Index
			prevOutput := prevTx.MsgTx().TxOut[prevIndex]

			inputScripts = append(inputScripts, prevOutput.PkScript)
		}
	}

	return inputScripts, nil
}

func testRescanResults(harness *neutrinoHarness, t *testing.T) {
	// Generate 5 blocks on h2 and wait for ChainService to sync to the
	// newly-best chain on h2. This will reorg the chain, including the
	// transactions broadcast earlier, so we'll have to check that the
	// rescan status has updated for the correct number of transactions.
	// However, with the addition of the reliable broadcaster, the
	// transaction will confirm once again on the h2 chain so the rescan
	// should still show the two received transactions in addition to the
	// two other transactions spending them.
	_, err := harness.h2.Node.Generate(5)
	if err != nil {
		t.Fatalf("Couldn't generate/submit blocks: %s", err)
	}
	err = waitForSync(t, harness.svc, harness.h2)
	if err != nil {
		checkErrChan(t, errChan)
		t.Fatalf("Couldn't sync ChainService: %s", err)
	}
	numTXs, _, err := checkRescanStatus()
	if err != nil {
		checkErrChan(t, errChan)
		t.Fatalf("Checking rescan status failed: %s", err)
	}
	if numTXs != 4 {
		t.Fatalf("Wrong number of relevant transactions. Want: 4, got:"+
			" %d", numTXs)
	}

	// Generate 7 blocks on h1 and wait for ChainService to sync to the
	// newly-best chain on h1.
	_, err = harness.h1.Node.Generate(7)
	if err != nil {
		t.Fatalf("Couldn't generate/submit block: %s", err)
	}
	err = waitForSync(t, harness.svc, harness.h1)
	if err != nil {
		checkErrChan(t, errChan)
		t.Fatalf("Couldn't sync ChainService: %s", err)
	}
	numTXs, _, err = checkRescanStatus()
	if err != nil {
		checkErrChan(t, errChan)
		t.Fatalf("Checking rescan status failed: %s", err)
	}
	if numTXs != 4 {
		t.Fatalf("Wrong number of relevant transactions. Want: 4, got:"+
			" %d", numTXs)
	}

	if !bytes.Equal(wantLog, gotLog) {
		leastBytes := len(wantLog)
		if len(gotLog) < leastBytes {
			leastBytes = len(gotLog)
		}
		diffIndex := 0
		for i := 0; i < leastBytes; i++ {
			if wantLog[i] != gotLog[i] {
				diffIndex = i
				break
			}
		}
		t.Fatalf("Rescan event logs differ starting at %d.\nWant: %v\n"+
			"Got:  %v\nDifference - want: %v\nDifference -- got: "+
			"%v", diffIndex, wantLog, gotLog, wantLog[diffIndex:],
			gotLog[diffIndex:])
	}

	// Connect h1 and h2, wait for them to synchronize and check for the
	// ChainService synchronization status.
	err = rpctest.ConnectNode(harness.h1, harness.h2)
	if err != nil {
		t.Fatalf("Couldn't connect h1 to h2: %s", err)
	}

	err = rpctest.JoinNodes([]*rpctest.Harness{harness.h1, harness.h2},
		rpctest.Blocks)
	if err != nil {
		t.Fatalf("Couldn't sync h1 and h2: %s", err)
	}

	err = waitForSync(t, harness.svc, harness.h1)
	if err != nil {
		t.Fatalf("Couldn't sync ChainService: %s", err)
	}

	// Now generate a bunch of blocks on each while they're connected,
	// triggering many tiny reorgs, and wait for sync again. The end result
	// is somewhat random, depending on how quickly the nodes process each
	// other's notifications vs finding new blocks, but the two nodes should
	// remain fully synchronized with each other at the end.
	go harness.h2.Node.Generate(75)
	harness.h1.Node.Generate(50)

	err = rpctest.JoinNodes([]*rpctest.Harness{harness.h1, harness.h2},
		rpctest.Blocks)
	if err != nil {
		t.Fatalf("Couldn't sync h1 and h2: %s", err)
	}

	// We increase the timeout because running on Travis with race
	// detection enabled can make this pretty slow.
	syncTimeout *= 2
	err = waitForSync(t, harness.svc, harness.h1)
	if err != nil {
		checkErrChan(t, errChan)
		t.Fatalf("Couldn't sync ChainService: %s", err)
	}

	close(quitRescan)
	err = <-errChan
	quitRescan = nil
	if err != neutrino.ErrRescanExit {
		t.Fatalf("Rescan ended with error: %s", err)
	}

	// Immediately try to add a new update to to the rescan that was just
	// shut down. This should fail as it is no longer running.
	rescan.WaitForShutdown()
	err = rescan.Update(neutrino.AddAddrs(addr2), neutrino.Rewind(1095))
	if err == nil {
		t.Fatalf("Expected update call to fail, it did not")
	}
}

// testRandomBlocks goes through all blocks in random order and ensures we can
// correctly get cfilters from them. It uses numQueryThreads goroutines running
// at the same time to go through this. 50 is comfortable on my somewhat dated
// laptop with default query optimization settings.
// TODO: Make this a benchmark instead.
func testRandomBlocks(harness *neutrinoHarness, t *testing.T) {
	var haveBest *headerfs.BlockStamp
	haveBest, err := harness.svc.BestBlock()
	if err != nil {
		t.Fatalf("Couldn't get best snapshot from ChainService: %s", err)
	}
	// Keep track of an error channel with enough buffer space to track one
	// error per block.
	errChan := make(chan error, haveBest.Height)
	// Test getting all of the blocks and filters.
	var wg sync.WaitGroup
	workerQueue := make(chan struct{}, numQueryThreads)
	for i := int32(1); i <= haveBest.Height; i++ {
		wg.Add(1)
		height := uint32(i)
		// Wait until there's room in the worker queue.
		workerQueue <- struct{}{}
		go func() {
			// On exit, open a spot in workerQueue and tell the
			// wait group we're done.
			defer func() {
				<-workerQueue
			}()
			defer wg.Done()
			// Get block header from database.
			blockHeader, err := harness.svc.BlockHeaders.
				FetchHeaderByHeight(height)
			if err != nil {
				errChan <- fmt.Errorf("Couldn't get block "+
					"header by height %d: %s", height, err)
				return
			}
			blockHash := blockHeader.BlockHash()
			// Get block via RPC.
			wantBlock, err := harness.h1.Node.GetBlock(&blockHash)
			if err != nil {
				errChan <- fmt.Errorf("Couldn't get block %d "+
					"(%s) by RPC", height, blockHash)
				return
			}
			// Get block from network.
			haveBlock, err := harness.svc.GetBlock(
				blockHash, queryOptions...,
			)
			if err != nil {
				errChan <- err
				return
			}
			if haveBlock == nil {
				errChan <- fmt.Errorf("Couldn't get block %d "+
					"(%s) from network", height, blockHash)
				return
			}
			// Check that network and RPC blocks match.
			if !reflect.DeepEqual(*haveBlock.MsgBlock(),
				*wantBlock) {
				errChan <- fmt.Errorf("Block from network "+
					"doesn't match block from RPC. Want: "+
					"%s, RPC: %s, network: %s", blockHash,
					wantBlock.BlockHash(),
					haveBlock.MsgBlock().BlockHash())
				return
			}
			// Check that block height matches what we have.
			if height != uint32(haveBlock.Height()) {
				errChan <- fmt.Errorf("Block height from "+
					"network doesn't match expected "+
					"height. Want: %v, network: %v",
					height, haveBlock.Height())
				return
			}
			// Get basic cfilter from network.
			haveFilter, err := harness.svc.GetCFilter(blockHash,
				wire.GCSFilterRegular, queryOptions...)
			if err != nil {
				errChan <- err
				return
			}
			// Get basic cfilter from RPC.
			wantFilter, err := harness.h1.Node.GetCFilter(
				&blockHash, wire.GCSFilterRegular)
			if err != nil {
				errChan <- fmt.Errorf("Couldn't get basic "+
					"filter for block %d (%s) via RPC: %s",
					height, blockHash, err)
				return
			}
			// Check that network and RPC cfilters match.
			var haveBytes []byte
			if haveFilter != nil {
				haveBytes, err = haveFilter.NBytes()
				if err != nil {
					errChan <- fmt.Errorf("Couldn't get "+
						"basic filter for block %d "+
						"(%s) via P2P: %s", height,
						blockHash, err)
					return
				}
			}
			if !bytes.Equal(haveBytes, wantFilter.Data) {
				errChan <- fmt.Errorf("Basic filter from P2P "+
					"network/DB doesn't match RPC value "+
					"for block %d (%s):\nRPC: %s\nNet: %s",
					height, blockHash,
					hex.EncodeToString(wantFilter.Data),
					hex.EncodeToString(haveBytes))
				return
			}

			inputScripts, err := fetchPrevInputScripts(
				haveBlock.MsgBlock(),
				harness.h1,
			)
			if err != nil {
				errChan <- fmt.Errorf("unable to create prev "+
					"input scripts: %v", err)
				return
			}

			// Calculate basic filter from block.
			calcFilter, err := builder.BuildBasicFilter(
				haveBlock.MsgBlock(), inputScripts,
			)
			if err != nil {
				errChan <- fmt.Errorf("Couldn't build basic "+
					"filter for block %d (%s): %s", height,
					blockHash, err)
				return
			}
			calcBytes, err := calcFilter.NBytes()
			if err != nil {
				errChan <- fmt.Errorf("Couldn't get bytes from"+
					" calculated basic filter for block "+
					"%d (%s): %s", height, blockHash, err)
			}
			// Check that the network value matches the calculated
			// value from the block.
			if !bytes.Equal(haveBytes, calcBytes) {
				errChan <- fmt.Errorf("Basic filter from P2P "+
					"network/DB doesn't match calculated "+
					"value for block %d (%s)", height,
					blockHash)
				return
			}
			// Get previous basic filter header from the database.
			prevHeader, err := harness.svc.RegFilterHeaders.
				FetchHeader(&blockHeader.PrevBlock)
			if err != nil {
				errChan <- fmt.Errorf("Couldn't get basic "+
					"filter header for block %d (%s) from "+
					"DB: %s", height-1,
					blockHeader.PrevBlock, err)
				return
			}
			// Get current basic filter header from the database.
			curHeader, err := harness.svc.RegFilterHeaders.
				FetchHeader(&blockHash)
			if err != nil {
				errChan <- fmt.Errorf("Couldn't get basic "+
					"filter header for block %d (%s) from "+
					"DB: %s", height, blockHash, err)
				return
			}
			// Check that the filter and header line up.
			calcHeader, err := builder.MakeHeaderForFilter(
				calcFilter, *prevHeader)
			if err != nil {
				errChan <- fmt.Errorf("Couldn't calculate "+
					"header for basic filter for block "+
					"%d (%s): %s", height, blockHash, err)
				return
			}
			if !bytes.Equal(curHeader[:], calcHeader[:]) {
				errChan <- fmt.Errorf("Filter header doesn't "+
					"match. Want: %s, got: %s", curHeader,
					calcHeader)
				return
			}
		}()
	}
	// Wait for all queries to finish.
	wg.Wait()
	// Close the error channel to make the error monitoring goroutine
	// finish.
	close(errChan)
	var lastErr error
	for err := range errChan {
		if err != nil {
			t.Errorf("%s", err)
			lastErr = fmt.Errorf("Couldn't validate all " +
				"blocks, filters, and filter headers.")
		}
	}
	if logLevel != btclog.LevelOff {
		t.Logf("Finished checking %d blocks and their cfilters",
			haveBest.Height)
	}
	if lastErr != nil {
		t.Fatal(lastErr)
	}
}

func TestNeutrinoSync(t *testing.T) {
	// Set up logging.
	logger := btclog.NewBackend(os.Stdout)
	chainLogger := logger.Logger("CHAIN")
	chainLogger.SetLevel(logLevel)
	neutrino.UseLogger(chainLogger)
	rpcLogger := logger.Logger("RPCC")
	rpcLogger.SetLevel(logLevel)
	rpcclient.UseLogger(rpcLogger)

	// Create a btcd SimNet node and generate 800 blocks
	h1, err := rpctest.New(
		&chaincfg.SimNetParams, nil, []string{"--txindex"}, "",
	)
	if err != nil {
		t.Fatalf("Couldn't create harness: %s", err)
	}
	defer h1.TearDown()
	err = h1.SetUp(false, 0)
	if err != nil {
		t.Fatalf("Couldn't set up harness: %s", err)
	}
	_, err = h1.Node.Generate(800)
	if err != nil {
		t.Fatalf("Couldn't generate blocks: %s", err)
	}

	// Create a second btcd SimNet node
	h2, err := rpctest.New(
		&chaincfg.SimNetParams, nil, []string{"--txindex"}, "",
	)
	if err != nil {
		t.Fatalf("Couldn't create harness: %s", err)
	}
	defer h2.TearDown()
	err = h2.SetUp(false, 0)
	if err != nil {
		t.Fatalf("Couldn't set up harness: %s", err)
	}

	// Create a third btcd SimNet node and generate 1200 blocks
	h3, err := rpctest.New(
		&chaincfg.SimNetParams, nil, []string{"--txindex"}, "",
	)
	if err != nil {
		t.Fatalf("Couldn't create harness: %s", err)
	}
	defer h3.TearDown()
	err = h3.SetUp(false, 0)
	if err != nil {
		t.Fatalf("Couldn't set up harness: %s", err)
	}
	_, err = h3.Node.Generate(1200)
	if err != nil {
		t.Fatalf("Couldn't generate blocks: %s", err)
	}

	// Connect, sync, and disconnect h1 and h2
	err = csd([]*rpctest.Harness{h1, h2})
	if err != nil {
		t.Fatalf("Couldn't connect/sync/disconnect h1 and h2: %s", err)
	}

	// Generate 300 blocks on the first node and 350 on the second
	_, err = h1.Node.Generate(300)
	if err != nil {
		t.Fatalf("Couldn't generate blocks: %s", err)
	}
	_, err = h2.Node.Generate(350)
	if err != nil {
		t.Fatalf("Couldn't generate blocks: %s", err)
	}

	// Now we have a node with 1100 blocks (h1), 1150 blocks (h2), and
	// 1200 blocks (h3). The chains of nodes h1 and h2 match up to block
	// 800. By default, a synchronizing wallet connected to all three
	// should synchronize to h3. However, we're going to take checkpoints
	// from h1 at 111, 333, 555, 777, and 999, and add those to the
	// synchronizing wallet's chain parameters so that it should
	// disconnect from h3 at block 111, and from h2 at block 555, and
	// then synchronize to block 800 from h1. Order of connection is
	// unfortunately not guaranteed, so the reorg may not happen with every
	// test.

	// Copy parameters and insert checkpoints
	modParams := chaincfg.SimNetParams
	for _, height := range []int64{111, 333, 555, 777, 999} {
		hash, err := h1.Node.GetBlockHash(height)
		if err != nil {
			t.Fatalf("Couldn't get block hash for height %d: %s",
				height, err)
		}
		modParams.Checkpoints = append(modParams.Checkpoints,
			chaincfg.Checkpoint{
				Hash:   hash,
				Height: int32(height),
			})
	}

	// Create a temporary directory, initialize an empty walletdb with an
	// SPV chain namespace, and create a configuration for the ChainService.
	tempDir, err := ioutil.TempDir("", "neutrino")
	if err != nil {
		t.Fatalf("Failed to create temporary directory: %s", err)
	}
	defer os.RemoveAll(tempDir)
	db, err := walletdb.Create(
		"bdb", tempDir+"/weks.db", true, dbOpenTimeout,
	)
	if err != nil {
		t.Fatalf("Error opening DB: %s\n", err)
	}
	defer db.Close()
	config := neutrino.Config{
		DataDir:     tempDir,
		Database:    db,
		ChainParams: modParams,
		AddPeers: []string{
			h3.P2PAddress(),
			h2.P2PAddress(),
			h1.P2PAddress(),
		},
	}

	neutrino.MaxPeers = 3
	neutrino.BanDuration = 5 * time.Second
	neutrino.QueryPeerConnectTimeout = 10 * time.Second
	svc, err := neutrino.NewChainService(config)
	if err != nil {
		t.Fatalf("Error creating ChainService: %s", err)
	}
	svc.Start()
	defer svc.Stop()

	// Create a test harness with the three nodes and the neutrino instance.
	testHarness := &neutrinoHarness{h1, h2, h3, svc}

	for _, testCase := range testCases {
		testCase := testCase
		if ok := t.Run(testCase.name, func(t *testing.T) {
			testCase.test(testHarness, t)
		}); !ok {
			break
		}
	}
}

// csd does a connect-sync-disconnect between nodes in order to support
// reorg testing. It brings up and tears down a temporary node, otherwise the
// nodes try to reconnect to each other which results in unintended reorgs.
func csd(harnesses []*rpctest.Harness) error {
	hTemp, err := rpctest.New(&chaincfg.SimNetParams, nil, nil, "")
	if err != nil {
		return err
	}
	// Tear down node at the end of the function.
	defer hTemp.TearDown()
	err = hTemp.SetUp(false, 0)
	if err != nil {
		return err
	}
	for _, harness := range harnesses {
		err = rpctest.ConnectNode(hTemp, harness)
		if err != nil {
			return err
		}
	}
	return rpctest.JoinNodes(harnesses, rpctest.Blocks)
}

// checkErrChan tries to read the passed error channel if possible and logs the
// error it found, if any. This is useful to help troubleshoot any timeouts
// during a rescan.
func checkErrChan(t *testing.T, errChan <-chan error) {
	select {
	case err := <-errChan:
		t.Logf("Got error from rescan: %s", err)
	default:
	}
}

// waitForSync waits for the ChainService to sync to the current chain state.
func waitForSync(t *testing.T, svc *neutrino.ChainService,
	correctSyncNode *rpctest.Harness) error {
	knownBestHash, knownBestHeight, err :=
		correctSyncNode.Node.GetBestBlock()
	if err != nil {
		return err
	}
	if logLevel != btclog.LevelOff {
		t.Logf("Syncing to %d (%s)", knownBestHeight, knownBestHash)
	}
	var haveBest *headerfs.BlockStamp
	haveBest, err = svc.BestBlock()
	if err != nil {
		return fmt.Errorf("Couldn't get best snapshot from "+
			"ChainService: %s", err)
	}
	var total time.Duration
	for haveBest.Hash != *knownBestHash {
		if total > syncTimeout {
			return fmt.Errorf("Timed out after %v waiting for "+
				"header synchronization.\n%s", syncTimeout,
				goroutineDump())
		}
		if haveBest.Height > knownBestHeight {
			return fmt.Errorf("synchronized to the wrong chain")
		}
		time.Sleep(syncUpdate)
		total += syncUpdate
		haveBest, err = svc.BestBlock()
		if err != nil {
			return fmt.Errorf("Couldn't get best snapshot from "+
				"ChainService: %s", err)
		}
	}

	// Check if we're current.
	if !svc.IsCurrent() {
		return fmt.Errorf("the ChainService doesn't see itself as " +
			"current")
	}

	// Check if we have all of the cfheaders.
	knownBasicHeader, err := correctSyncNode.Node.GetCFilterHeader(
		knownBestHash, wire.GCSFilterRegular)
	if err != nil {
		return fmt.Errorf("Couldn't get latest basic header from "+
			"%s: %s", correctSyncNode.P2PAddress(), err)
	}
	haveBasicHeader := &chainhash.Hash{}

	for knownBasicHeader.PrevFilterHeader != *haveBasicHeader {
		if total > syncTimeout {
			return fmt.Errorf("Timed out after %v waiting for "+
				"cfheaders synchronization.\n%s", syncTimeout,
				goroutineDump())
		}
		haveBasicHeader, err = svc.RegFilterHeaders.FetchHeader(knownBestHash)
		if err != nil {
			if err == io.EOF {
				haveBasicHeader = &chainhash.Hash{}
				time.Sleep(syncUpdate)
				total += syncUpdate
				continue
			}
			return fmt.Errorf("Couldn't get regular filter header"+
				" for %s: %s", knownBestHash, err)
		}
		time.Sleep(syncUpdate)
		total += syncUpdate
	}

	if logLevel != btclog.LevelOff {
		t.Logf("Synced cfheaders to %d (%s)", haveBest.Height,
			haveBest.Hash)
	}

	// At this point, we know we have good cfheaders. Now we wait for the
	// rescan, if one is going, to catch up.
	for {
		if total > syncTimeout {
			return fmt.Errorf("Timed out after %v waiting for "+
				"rescan to catch up.\n%s", syncTimeout,
				goroutineDump())
		}
		time.Sleep(syncUpdate)
		total += syncUpdate
		rescanMtx.RLock()
		// We don't want to do this if we haven't started a rescan
		// yet.
		if len(gotLog) == 0 {
			rescanMtx.RUnlock()
			break
		}
		_, rescanHeight, err := checkRescanStatus()
		if err != nil {
			// If there's an error, that means the
			// FilteredBlockConnected notifications are still
			// catching up to the BlockConnected notifications.
			rescanMtx.RUnlock()
			continue
		}
		if logLevel != btclog.LevelOff {
			t.Logf("Rescan caught up to block %d", rescanHeight)
		}
		if rescanHeight == haveBest.Height {
			rescanMtx.RUnlock()
			break
		}
		rescanMtx.RUnlock()
	}

	// At this point, we know the latest cfheader is stored in the
	// ChainService database. We now compare each cfheader the
	// harness knows about to what's stored in the ChainService
	// database to see if we've missed anything or messed anything
	// up.
	for i := int32(0); i <= haveBest.Height; i++ {
		if total > syncTimeout {
			return fmt.Errorf("Timed out after %v waiting for "+
				"cfheaders DB to catch up.\n%s", syncTimeout,
				goroutineDump())
		}
		head, err := svc.BlockHeaders.FetchHeaderByHeight(uint32(i))
		if err != nil {
			return fmt.Errorf("Couldn't read block by "+
				"height: %s", err)
		}

		hash := head.BlockHash()
		haveBasicHeader, err = svc.RegFilterHeaders.FetchHeader(&hash)
		if err == io.EOF {
			// This sometimes happens due to reorgs after the
			// service decides it's current. Just wait for the
			// DB to catch up and try again.
			time.Sleep(syncUpdate)
			total += syncUpdate
			i--
			continue
		}
		if err != nil {
			return fmt.Errorf("Couldn't get basic header "+
				"for %d (%s) from DB: %v\n%s", i, hash,
				err, goroutineDump())
		}
		knownBasicHeader, err = correctSyncNode.Node.GetCFilterHeader(
			&hash, wire.GCSFilterRegular,
		)
		if err != nil {
			return fmt.Errorf("Couldn't get basic header "+
				"for %d (%s) from node %s", i, hash,
				correctSyncNode.P2PAddress())
		}

		if *haveBasicHeader != knownBasicHeader.PrevFilterHeader {
			return fmt.Errorf("Basic header for %d (%s) "+
				"doesn't match node %s. DB: %s, node: %s", i,
				hash, correctSyncNode.P2PAddress(),
				haveBasicHeader,
				knownBasicHeader.PrevFilterHeader)
		}
	}
	return nil
}

// startRescan starts a rescan in another goroutine, and logs all notifications
// from the rescan. At the end, the log should match one we precomputed based
// on the flow of the test. The rescan starts at the genesis block and the
// notifications continue until the `quit` channel is closed.
func startRescan(t *testing.T, svc *neutrino.ChainService, addr btcutil.Address,
	startBlock *headerfs.BlockStamp, quit <-chan struct{}) (
	*neutrino.Rescan, <-chan error) {
	rescan := neutrino.NewRescan(
		&neutrino.RescanChainSource{svc},
		neutrino.QuitChan(quit),
		neutrino.WatchAddrs(addr),
		neutrino.StartBlock(startBlock),
		neutrino.NotificationHandlers(
			rpcclient.NotificationHandlers{
				OnBlockConnected: func(
					hash *chainhash.Hash,
					height int32, time time.Time) {
					rescanMtx.Lock()
					gotLog = append(gotLog,
						[]byte("bc")...)
					curBlockHeight = height
					rescanMtx.Unlock()
				},
				OnBlockDisconnected: func(
					hash *chainhash.Hash,
					height int32, time time.Time) {
					rescanMtx.Lock()
					delete(ourKnownTxsByBlock, *hash)
					gotLog = append(gotLog,
						[]byte("bd")...)
					curBlockHeight = height - 1
					rescanMtx.Unlock()
				},
				OnRecvTx: func(tx *btcutil.Tx,
					details *btcjson.BlockDetails) {
					rescanMtx.Lock()
					hash, err := chainhash.
						NewHashFromStr(
							details.Hash)
					if err != nil {
						t.Errorf("Couldn't "+
							"decode hash "+
							"%s: %s",
							details.Hash,
							err)
					}
					ourKnownTxsByBlock[*hash] = append(
						ourKnownTxsByBlock[*hash],
						tx)
					gotLog = append(gotLog,
						[]byte("rv")...)
					rescanMtx.Unlock()
				},
				OnRedeemingTx: func(tx *btcutil.Tx,
					details *btcjson.BlockDetails) {
					rescanMtx.Lock()
					hash, err := chainhash.
						NewHashFromStr(
							details.Hash)
					if err != nil {
						t.Errorf("Couldn't "+
							"decode hash "+
							"%s: %s",
							details.Hash,
							err)
					}
					ourKnownTxsByBlock[*hash] = append(
						ourKnownTxsByBlock[*hash],
						tx)
					gotLog = append(gotLog,
						[]byte("rd")...)
					rescanMtx.Unlock()
				},
				OnFilteredBlockConnected: func(
					height int32,
					header *wire.BlockHeader,
					relevantTxs []*btcutil.Tx) {
					rescanMtx.Lock()
					ourKnownTxsByFilteredBlock[header.BlockHash()] =
						relevantTxs
					gotLog = append(gotLog,
						[]byte("fc")...)
					gotLog = append(gotLog,
						uint8(len(relevantTxs)))
					curFilteredBlockHeight = height
					rescanMtx.Unlock()
				},
				OnFilteredBlockDisconnected: func(
					height int32,
					header *wire.BlockHeader) {
					rescanMtx.Lock()
					delete(ourKnownTxsByFilteredBlock,
						header.BlockHash())
					gotLog = append(gotLog,
						[]byte("fd")...)
					curFilteredBlockHeight =
						height - 1
					rescanMtx.Unlock()
				},
			}),
	)

	errChan := rescan.Start()

	return rescan, errChan
}

// checkRescanStatus returns the number of relevant transactions we currently
// know about and the currently known height.
func checkRescanStatus() (int, int32, error) {
	var txCount [2]int
	rescanMtx.RLock()
	defer rescanMtx.RUnlock()
	for _, list := range ourKnownTxsByBlock {
		for range list {
			txCount[0]++
		}
	}
	for _, list := range ourKnownTxsByFilteredBlock {
		for range list {
			txCount[1]++
		}
	}
	if txCount[0] != txCount[1] {
		return 0, 0, fmt.Errorf("Conflicting transaction count " +
			"between notifications.")
	}
	if curBlockHeight != curFilteredBlockHeight {
		return 0, 0, fmt.Errorf("Conflicting block height between "+
			"notifications: onBlockConnected=%d, "+
			"onFilteredBlockConnected=%d.", curBlockHeight,
			curFilteredBlockHeight)
	}
	return txCount[0], curBlockHeight, nil
}

// banPeer bans and disconnects the requested harness from the ChainService
// instance for BanDuration seconds.
func banPeer(t *testing.T, svc *neutrino.ChainService, harness *rpctest.Harness) {
	t.Helper()

	peers := svc.Peers()
	for _, peer := range peers {
		peerAddr := peer.Addr()
		if peerAddr != harness.P2PAddress() {
			continue
		}

		err := svc.BanPeer(peerAddr, banman.ExceededBanThreshold)
		if err != nil {
			if logLevel != btclog.LevelOff {
				t.Fatalf("unable to ban peer %v: %v", peerAddr,
					err)
			}
		}
	}
}

// goroutineDump returns a string with the current goroutine dump in order to
// show what's going on in case of timeout.
func goroutineDump() string {
	buf := make([]byte, 1<<18)
	runtime.Stack(buf, true)
	return string(buf)
}