Skip to content

Latest commit

 

History

History
184 lines (124 loc) · 5.96 KB

README.md

File metadata and controls

184 lines (124 loc) · 5.96 KB
Raw

Security Scanning with Docker Hub

Lab Meta

Difficulty: Beginner

Time: Approximately 10 minutes

In this lab you'll learn how to use Docker Security Scanning with Docker Hub private repositories.

You will complete the following steps as part of this lab.

Prerequisites

You will need all of the following to complete this lab:

  • A Docker host running Docker 1.13 or higher
  • A Docker ID with at least one spare private repository on Docker Hub

Step 1: Create a private Hub repo

Docker Security Scanning is a service currently offered for images stored in Docker Hub private repositories. In this step you will create a new private repository within your Docker Hub namespace.

NOTE: This step assumes that you have a DockerHub account that will allow you to create a new private repo. If you have used all of the private repos on your account you will need to re-use one of them. If you do this you will need to take care not to interfere with images you already have stored in the repo. The only alternative is to upgrade to a plan that offers more private repos.

  1. Log in to Docker Hub with your Docker ID.

  2. Click the Create Repository + button.

  1. Give the repo a name, short description, and make sure that Visibility=private then click Create.

Now that you have created a new private Docker Hub repo, you can proceed to the next step.

Step 2: Pull an image

In this step you'll pull an image that you will use in Step 3.

  1. Use the docker pull command to pull a copy of the alpine:edge image.
node1$ docker image pull alpine:edge
edge: Pulling from library/alpine
71c5a0cc58e4: Pull complete
Digest: sha256:99588bc8883c955c157...0c223e6c7cabca5f600a3e9f8d5cd
Status: Downloaded newer image for alpine:edge
  1. Confirm that the image was pulled successfully.
node1$ docker image ls
REPOSITORY   TAG         IMAGE ID         CREATED         SIZE
alpine       edge        8914de95a28d     2 weeks ago     4 MB

You will use this image in the next step.

Step 3: Tag and push an image

In this step you'll tag the image that you pulled in the previous step so that it is associated with the private Docker Hub repo you created in Step 1.

Be sure to substitute nigelpoulton with your own Docker ID in the steps below.

  1. Tag the image so that it can be pushed to your newly created repo.
node1$ docker image tag alpine:edge nigelpoulton/scan:v1

This command has tagged the alpine:edge image so that it can be pushed to the nigelpoulton/scan repo (remember to replace nigelpoulton with your own Docker ID). It has also given it the v1 tag.

  1. Verify that the new tag exists.

    node1$ docker image ls
REPOSITORY          TAG       IMAGE ID         CREATED         SIZE
alpine              edge      8914de95a28d     2 weeks ago     4 MB
nigelpoulton/scan   v1        8914de95a28d     2 weeks ago     4 MB

Notice that both lines show the same IMAGE ID but have different values for REPOSITORY and TAG. This is because the exact same image has been tagged twice.

  1. From the CLI of your Docker host, login to Docker Hub with your Docker ID.

Be sure to use your own Docker ID.

node1$ docker login
Username: nigelpoulton
Password:
Login Succeeded
  1. Push the newly tagged image.

Be sure to substitute the image tag below with the correct image from your own environment.

node1$ docker image push nigelpoulton/scan:v1
The push refers to a repository [docker.io/nigelpoulton/scan]
ff7d0c6cd736: Mounted from library/alpine
v1: digest: sha256:99588bc8883c9...5f600a3e9f8d5cd size: 528

Congratualtions. In this step you tagged and pushed an image to your newly created private repo on Docker Hub.

Step 4: View scan results

In this step you'll log back in to Docker Hub and view the scan results of the image you pushed in Step 3.

If you followed the exercise and used the alpine:edge image, the scanning may have completed by the time you log back in to Docker Hub. If you used a different image, especially a larger image, it might take longer for the image scan to complete.

  1. Log back in to Docker Hub from your web browser.

  2. Navigate to the repo you created in Step 1 and click the Tags tab.

  3. View the high-level scan results and feel free to click into them for more details.

If the scan is still in progress you may want to grab a coffee and refresh the page in a couple of minutes. There are occasions when scan jobs can get queued and take a while to complete. If your scan is taking a long time to complete it might be worth searching Docker Hub for the alpine:edge image and exploring the scan results of that image.

Congratulations, you have completed this lab Security Scanning with Docker Hub.

Step 5: Clean-up

In this step you will remove all images and containers on the host and clean up any other artifacts created in this lab.

  1. Remove all images on the host.

    This command will remove all images on your Docker host. Only perform this step if you know you will not use these images again.

    $ docker image rm $(docker image ls -aq)
<Snip>

  2. Remove all containers on the host.

    This command will remove all containers on your Docker host. Only perform this step if you know you know you do not need any of the containers running on your system.

    $ docker container rm $(docker container ls -q) -f
<Snip>

  3. Log on to Docker Hub and delete the repository that you created for this demo.

    click on the repo > click on the Settings tabe of the repo > click Delete and follow the instructions.