init.target.rc

# Copyright (c) 2013-2020, The Linux Foundation. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#     * Redistributions of source code must retain the above copyright
#       notice, this list of conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above
#       copyright notice, this list of conditions and the following
#       disclaimer in the documentation and/or other materials provided
#       with the distribution.
#     * Neither the name of The Linux Foundation nor the names of its
#       contributors may be used to endorse or promote products derived
#       from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
# ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
#

on early-init
    write /dev/stune/schedtune.boost 50
    write /dev/stune/schedtune.prefer_idle 1

on init
    write /dev/stune/foreground/schedtune.sched_boost_no_override 1
    write /dev/stune/top-app/schedtune.sched_boost_no_override 1
    write /dev/stune/schedtune.colocate 0
    write /dev/stune/background/schedtune.colocate 0
    write /dev/stune/system-background/schedtune.colocate 0
    write /dev/stune/foreground/schedtune.colocate 0
    write /dev/stune/top-app/schedtune.colocate 1
    write /sys/module/qpnp_rtc/parameters/poweron_alarm 1
    wait /dev/block/platform/soc/${ro.boot.bootdevice}
    symlink /dev/block/platform/soc/${ro.boot.bootdevice} /dev/block/bootdevice

on late-init
    # Start services for bootanim
    start surfaceflinger
    start bootanim
    start vendor.hwcomposer-2-4
    start vendor.configstore-hal
    start vendor.qti.hardware.display.allocator

on early-fs
    start vold

on fs
    mount_all --early
    chown root system /mnt/vendor/persist
    chmod 0771 /mnt/vendor/persist
    restorecon_recursive /mnt/vendor/persist
    mkdir /mnt/vendor/persist/data 0700 system system

on post-fs
    # set RLIMIT_MEMLOCK to 64MB
    setrlimit 8 67108864 67108864

    mkdir /mnt/vendor/dsp 0770 root root
    copy /vendor/dsp/cdsp/fastrpc_shell_3 /mnt/vendor/dsp/fastrpc_shell_3
    chmod 0644 /mnt/vendor/dsp/fastrpc_shell_3
    mount none /mnt/vendor/dsp/fastrpc_shell_3 /vendor/dsp/cdsp/fastrpc_shell_3 bind

on early-boot
    write /dev/ipa 1

on late-fs
    wait_for_prop hwservicemanager.ready true
    exec_start wait_for_keymaster
    mount_all --late

service sec_nvm /vendor/bin/sec_nvm
    class core
    user system
    group system

on post-fs-data
    mkdir /data/vendor/hbtp 0750 system system
    mkdir /persist/qti_fp 0700 system system
    mkdir /data/vendor/nnhal 0700 system system

# For cpusets initialize for Silver Only first and then Silver + Gold
# Silver Only configuration cannot work with 0-7
on boot
    chown system system /sys/kernel/hbtp/display_pwr
    start rmt_storage
    start rfs_access

# Add a cpuset for the camera daemon
# We want all cores for camera
    mkdir /dev/cpuset/camera-daemon
    write /dev/cpuset/camera-daemon/cpus 0-7
    write /dev/cpuset/camera-daemon/mems 0
    chown cameraserver cameraserver /dev/cpuset/camera-daemon
    chown cameraserver cameraserver /dev/cpuset/camera-daemon/tasks
    chmod 0660 /dev/cpuset/camera-daemon/tasks

# access permissions for FPC service
    chown system system /sys/bus/platform/devices/soc/soc:fpc1020/irq
    chown system system /sys/bus/platform/devices/soc/soc:fpc1020/wakeup_enable

# DT2W
    chown system system /sys/touchpanel/double_tap
    chmod 0660 /sys/touchpanel/double_tap

# Kernelspace battery saver
    chown system system /sys/module/battery_saver/parameters/enabled
    chmod 0660 /sys/module/battery_saver/parameters/enabled

# Thermal
    chmod 0664 /sys/class/thermal/thermal_message/sconfig
    chown system system /sys/class/thermal/thermal_message/sconfig
    chmod 0666 /sys/class/thermal/thermal_message/temp_state
    chown system system /sys/class/thermal/thermal_message/temp_state
    write /sys/class/thermal/thermal_message/sconfig 0

#USB controller configuration
    setprop vendor.usb.rndis.func.name "gsi"
    setprop vendor.usb.rmnet.func.name "gsi"
    setprop vendor.usb.rmnet.inst.name "rmnet"
    setprop vendor.usb.dpl.inst.name "dpl"
    setprop vendor.usb.qdss.inst.name "qdss"
    setprop sys.usb.configfs 1

#start camera server as daemon
#service qcamerasvr /system/bin/mm-qcamera-daemon
#    class late_start
#    user camera
#    group camera system inet input graphics
#pd-mapper
service vendor.pd_mapper /vendor/bin/pd-mapper
    class core
    user system
    group system

#Peripheral manager
service vendor.per_mgr /vendor/bin/pm-service
    class core
    user system
    group system
    ioprio rt 4

service vendor.per_proxy /vendor/bin/pm-proxy
    class core
    user system
    group system
    disabled

on property:init.svc.vendor.per_mgr=running
    start vendor.per_proxy

on property:sys.shutdown.requested=*
    stop vendor.per_proxy

on charger
    setprop vendor.usb.controller 4e00000.dwc3
    setprop sys.usb.configfs 1

on property:vendor.display.lcd_density=640
   setprop dalvik.vm.heapgrowthlimit 512m
on property:vendor.display.lcd_density=560
   setprop dalvik.vm.heapgrowthlimit 256m
on property:vendor.display.lcd_density=480
   setprop dalvik.vm.heapgrowthlimit 128m
on property:vendor.display.lcd_density=240
   setprop dalvik.vm.heapgrowthlimit 96m
on property:vendor.display.lcd_density=160
   setprop dalvik.vm.heapgrowthlimit 96m

## import cne init file
#on post-fs
#    export LD_PRELOAD /vendor/lib/libNimsWrap.so
#
## Allow usb charging to be disabled peristently
#on property:persist.usb.chgdisabled=1
#    write /sys/class/power_supply/battery/charging_enabled 0
#
#on property:persist.usb.chgdisabled=0
#    write /sys/class/power_supply/battery/charging_enabled 1

service spdaemon /vendor/bin/spdaemon
    class core
    user system
    group system

#service mpdecision /system/vendor/bin/mpdecision --avg_comp
#   user root
#   disabled
#
#service qosmgrd /system/bin/qosmgr /system/etc/qosmgr_rules.xml
#   user system
#   group system
#   disabled
#
#service security-check1 /sbin/security_boot_check system
#    class core
#    oneshot
#
#service security-check2 /sbin/security_boot_check recovery
#    class core
#    oneshot
#
#service time_daemon /system/vendor/bin/time_daemon
#   class late_start
#   user root
#   group root

#service audiod /vendor/bin/audiod
#   class late_start
#   user system
#   group system
#
#service usf_tester /vendor/bin/usf_tester
#    user system
#    group system inet
#    disabled
#
#service usf_epos /vendor/bin/usf_epos
#    user system
#    group system inet
#    disabled
#
#service usf_gesture /vendor/bin/usf_gesture
#    user system
#    group system inet
#    disabled
#

#service usf_sync_gesture /system/bin/usf_sync_gesture
#    user system
#    group system inet
#    disabled
#

#service usf_p2p /system/bin/usf_p2p
#    user system
#    group system inet
#    disabled
#
#service usf_hovering /vendor/bin/usf_hovering
#    user system
#    group system inet
#    disabled
#
#service usf_proximity /system/bin/usf_proximity
#    user system
#    group system inet
#    disabled
#
#service usf-post-boot /system/vendor/bin/sh /system/etc/usf_post_boot.sh
#    class late_start
#    user root
#    disabled
#    oneshot
#
#on property:init.svc.bootanim=stopped
#    start usf-post-boot
#
#
#on boot
#    insmod /system/lib/modules/adsprpc.ko
#    insmod /system/lib/modules/mhi.ko
## access permission for secure touch
#    chmod 0660 /sys/devices/f9966000.i2c/i2c-1/1-004a/secure_touch_enable
#    chmod 0440 /sys/devices/f9966000.i2c/i2c-1/1-004a/secure_touch
#    chmod 0660 /sys/devices/f9966000.i2c/i2c-1/1-0020/secure_touch_enable
#    chmod 0440 /sys/devices/f9966000.i2c/i2c-1/1-0020/secure_touch
#    chown system drmrpc /sys/devices/f9966000.i2c/i2c-1/1-004a/secure_touch_enable
#    chown system drmrpc /sys/devices/f9966000.i2c/i2c-1/1-004a/secure_touch
#    chown system drmrpc /sys/devices/f9966000.i2c/i2c-1/1-0020/secure_touch_enable
#    chown system drmrpc /sys/devices/f9966000.i2c/i2c-1/1-0020/secure_touch
#
#
#
#service mdm_helper /system/bin/mdm_helper
#    class core
#    onrestart setprop ro.service.mdm_helper_restarted "true"
#    disabled
#
#service mdm_helper_proxy /system/bin/mdm_helper_proxy
#    class core
#    disabled
#
#service mdm_launcher /system/bin/sh /init.mdm.sh
#    class main
#    oneshot
#
#service qcamerasvr /system/bin/mm-qcamera-daemon
#    class late_start
#    user camera
#    group camera system inet input graphics
#
# Stop mdm_helper_proxy in case of shutdown
#on property:sys.shutdown.requested=*
#    stop mdm_helper_proxy
#
# Stop mdm_helper_proxy on APQ target
#on property:ro.radio.noril=yes
#    stop mdm_helper_proxy
#
#on property:persist.airplane.mode.pwr.svg=enabled
#    setprop ro.mdm_helper_proxy_req false
#
#on property:init.svc.ril-daemon=running
#    setprop ro.mdm_helper_proxy_req true
#
## Start mdm_helper_proxy
#on property:ro.mdm_helper_proxy_req=true
#    start mdm_helper_proxy
#
## QCA1530 SoC core detect
#service gnss-detect /system/vendor/bin/gnss.qca1530.sh detect
#   class core
#   oneshot
#
## QCA1530 SoC late_start group trigger
#service gnss-init /system/vendor/bin/gnss.qca1530.sh init
#   class late_start
#   oneshot
#
## QCA1530 SoC Service Daemon
#service gnss-svcd /system/vendor/bin/gnss.qca1530.sh start
#   class late_start
#   user root
#   group gps system qcom_diag diag log inet net_raw
#   disabled

on property:vold.decrypt=trigger_restart_framework
   start vendor.cnss_diag

service vendor.cnss_diag /system/vendor/bin/cnss_diag -q -f -t HELIUM
   class main
   user system
   group system wifi inet sdcard_rw media_rw diag
   oneshot

service ppd /vendor/bin/mm-pp-dpps
    class late_start
    user system
    group system graphics
    socket pps stream 0660 system system
    disabled

on property:init.svc.hwcomposer-2-1=stopped
    stop ppd

on property:init.svc.hwcomposer-2-1=running
    start ppd

on property:init.svc.hwcomposer-2-1=restarting
    stop ppd

#service nqs /system/bin/nqs
#    class late_start
#    socket nqs_qsb_comm stream 660 system system
#    user system
#    group drmrpc
#
#service adsprpcd /system/vendor/bin/adsprpcd
#   class main
#   user media
#   group media
#
##Start picture quality tuning service
#service vqttoolservice /system/bin/vqttoolservice
#    class late_start
#    socket vqtss stream 0660 system system
#    user system
#    group system

service hbtp /system/vendor/bin/hbtp_daemon
     class main
     user system
     group system
     disabled

service qfp-daemon /vendor/bin/qfp-daemon
    class late_start
    user system
    group system drmrpc diag input

service energy-awareness /system/vendor/bin/energy-awareness
    class main
    user system
    group system
    oneshot

service smcinvoked /system/bin/smcinvoked
    class main
    user system
    group system

service dcvs-sh /vendor/bin/init.qti.dcvs.sh
    class late_start
    user root
    group root system
    disabled
    oneshot

on property:vendor.dcvs.prop=1
   start dcvs-sh

service nqnfcinfo /vendor/bin/nqnfcinfo
    class late_start
    group nfc
    user system
    oneshot
    disabled

service nqnfc_2_0_hal_service /vendor/bin/hw/vendor.nxp.hardware.nfc@2.0-service
    class hal
    user nfc
    group nfc
    override
    disabled

on property:ro.product.device=willow
    enable nqnfcinfo
    enable nqnfc_2_0_hal_service

on property:persist.sys.device_provisioned=1
    setprop dalvik.vm.dex2oat-cpu-set 0,1,2,3,6,7
    setprop dalvik.vm.dex2oat-threads 6

on property:vendor.camera.cpuperf.en=*
    write /dev/stune/foreground/schedtune.prefer_idle ${vendor.camera.cpuperf.en}

on property:sys.boot_completed=1
    write /dev/stune/schedtune.prefer_idle 0
    write /dev/stune/schedtune.boost 0