Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Jerking problem #4

Open
bkubicek opened this issue Aug 25, 2011 · 5 comments
Open

Jerking problem #4

bkubicek opened this issue Aug 25, 2011 · 5 comments

Comments

@bkubicek
Copy link
Owner

Citation from Joel:

I put a video of my jerking problem on http://www.youtube.com/watch?v=eP-gfCq5mYY
Each movement is 200mm in one axis and 5mm in the other. Speed in gcode was F36000. Once the ratio of each axis exceeds 200mm x 50mm, or the speed gets dropped to F35505, it doesn't jerk
@bradleyf
Copy link

Could be related to LCD updates

@jv4779
Copy link

jv4779 commented Aug 26, 2011

see https://github.com/jv4779/Marlin/commit/51c423bcf52e7bd594b0cd45830d2e33c7a474e4 that should fix this. Where is the master reposity for Marlin, bkubicek looks to all bout Ultimaker, ErikZalm all about gen6, no response on ErikZalm pull requests, but I can commit here. My pull requests have been issues for all machine variants.

@bradleyf
Copy link

jv4779: Pls contact bkubicek and commit it to our experimental branch

@bkubicek
Copy link
Owner Author

bkubicek commented Nov 3, 2011

is it still an issue with my current state of the lcd implementation?

@bkubicek
Copy link
Owner Author

bkubicek commented Nov 4, 2011

also, did you actually have LCD enabled at all? because otherwise that could never have been an issue.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
3 participants
@jv4779 @bradleyf @bkubicek