A Node.js library for creating, discovering, and configuring iBeacons
- See noble prerequisites and bleno prerequisites for your platform
npm install mqtt
npm install moment
git clone https://github.com/bitandbytes/bleacon.git
'git clone' should be done into the 'node_modules' folder
var Bleacon = require('bleacon');
"Create" an iBeacon
var uuid = 'e2c56db5dffb48d2b060d0f5a71096e0';
var major = 0; // 0 - 65535
var minor = 0; // 0 - 65535
var measuredPower = -59; // -128 - 127 (measured RSSI at 1 meter)
Bleacon.startAdvertising(uuid, major, minor, measuredPower);
Stop your iBeacon
Bleacon.stopAdvertising();
var uuid = 'e2c56db5dffb48d2b060d0f5a71096e0';
var major = 0; // 0 - 65535
var minor = 0; // 0 - 65535
Bleacon.startScanning([uuid], [major], [minor]);
Examples
Bleacon.startScanning(); // scan for any bleacons
Bleacon.startScanning(uuid); // scan for bleacons with a particular uuid
Bleacon.startScanning(uuid, major); // scan for bleacons with a particular uuid and major
Bleacon.startScanning(uuid, major, minor); // scan for bleacons with a particular uuid. major, and minor
Bleacon.stopScanning();
Bleacon.on('discover', function(bleacon) {
// ...
});
bleacon
properties:
- uuid
- advertised uuid
- major
- advertised major
- minor
- advertised minor
- measuredPower
- advertised measured RSSI at 1 meter away
- rssi
- current RSSI
- accuracy
- +/- meters, based on measuredPower and RSSI
- proximity
- current proximity ('unknown', 'immediate', 'near', or 'far')
Note: not official, determined using noble, and the AirLocate example.
Following data is in the manufacturer data section of the advertisment data
<company identifier (2 bytes)> <type (1 byte)> <data length (1 byte)> <uuid (16 bytes)> <major (2 bytes)> <minor (2 bytes)> <RSSI @ 1m>
Example:
4C00 02 15 585CDE931B0142CC9A1325009BEDC65E 0000 0000 C5
- Apple Company Identifier (Little Endian)
- data type, 0x02 => iBeacon
- data length, 0x15 = 21
- uuid:
585CDE931B0142CC9A1325009BEDC65E
- major:
0000
- minor:
0000
- meaured power at 1 meter:
0xc5
=-59