diff --git a/configs/JHEG473/config.h b/configs/JHEG473/config.h
new file mode 100644
index 00000000..a0ad8c33
--- /dev/null
+++ b/configs/JHEG473/config.h
@@ -0,0 +1,96 @@
+/*
+ * This file is part of Betaflight.
+ *
+ * Betaflight is free software. You can redistribute this software
+ * and/or modify this software under the terms of the GNU General
+ * Public License as published by the Free Software Foundation,
+ * either version 3 of the License, or (at your option) any later
+ * version.
+ *
+ * Betaflight is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this software.
+ *
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define FC_TARGET_MCU       STM32G47X
+
+#define BOARD_NAME          JHEG473
+#define MANUFACTURER_ID     JHEM
+
+#define USE_ACC
+#define USE_GYRO
+#define USE_ACC_SPI_ICM42688P
+#define USE_GYRO_SPI_ICM42688P
+#define USE_BARO
+#define USE_BARO_DPS310
+#define USE_FLASH
+#define USE_FLASH_W25Q128FV
+#define USE_MAX7456
+
+#define BEEPER_PIN          PA8
+#define MOTOR1_PIN          PB0
+#define MOTOR2_PIN          PB1
+#define MOTOR3_PIN          PA4
+#define MOTOR4_PIN          PC6
+#define LED_STRIP_PIN       PB2
+#define UART1_TX_PIN        PA9
+#define UART1_RX_PIN        PA10
+#define UART2_TX_PIN        PA2
+#define UART2_RX_PIN        PA3
+#define UART3_TX_PIN        PB10
+#define UART3_RX_PIN        PB11
+#define UART4_TX_PIN        PC10
+#define UART4_RX_PIN        PC11
+#define I2C1_SCL_PIN        PA15
+#define I2C1_SDA_PIN        PB7
+#define LED0_PIN            PB6
+#define LED1_PIN            PB9
+#define PINIO1_PIN          PC15
+#define SPI1_SCK_PIN        PA5
+#define SPI1_SDI_PIN        PA6
+#define SPI1_SDO_PIN        PA7
+#define SPI2_SCK_PIN        PB13
+#define SPI2_SDI_PIN        PB14
+#define SPI2_SDO_PIN        PB15
+#define SPI3_SCK_PIN        PB3
+#define SPI3_SDI_PIN        PB4
+#define SPI3_SDO_PIN        PB5
+#define ADC_VBAT_PIN        PA0
+#define ADC_CURR_PIN        PA1
+#define FLASH_CS_PIN        PC14
+#define MAX7456_SPI_CS_PIN  PB12
+#define GYRO_1_EXTI_PIN     PC4
+#define GYRO_1_CS_PIN       PC13
+
+#define TIMER_PIN_MAPPING \
+    TIMER_PIN_MAP( 0, LED_STRIP_PIN, 1,  0 ) \
+    TIMER_PIN_MAP( 1, MOTOR1_PIN,    1,  1 ) \
+    TIMER_PIN_MAP( 2, MOTOR2_PIN,    1,  2 ) \
+    TIMER_PIN_MAP( 3, MOTOR3_PIN,    1,  3 ) \
+    TIMER_PIN_MAP( 4, MOTOR4_PIN,    1,  4 ) \
+    TIMER_PIN_MAP( 5, BEEPER_PIN,    1, -1 )
+
+#define ADC1_DMA_OPT 8
+
+#define BARO_I2C_INSTANCE               I2CDEV_1
+#define MAG_I2C_INSTANCE                I2CDEV_1
+
+#define DEFAULT_BLACKBOX_DEVICE         BLACKBOX_DEVICE_FLASH
+#define DEFAULT_DSHOT_BURST             DSHOT_DMAR_OFF
+#define DEFAULT_DSHOT_BITBANG           DSHOT_BITBANG_ON
+#define DEFAULT_CURRENT_METER_SOURCE    CURRENT_METER_ADC
+#define DEFAULT_VOLTAGE_METER_SOURCE    VOLTAGE_METER_ADC
+#define BEEPER_INVERTED
+#define MAX7456_SPI_INSTANCE            SPI2
+#define FLASH_SPI_INSTANCE              SPI3
+#define GYRO_1_SPI_INSTANCE             SPI1
+#define GYRO_1_ALIGN                    CW180_DEG