diff --git a/configs/.DS_Store b/configs/.DS_Store
new file mode 100644
index 00000000..4e2eeaf1
Binary files /dev/null and b/configs/.DS_Store differ
diff --git a/configs/BROTHERHOBBYF722V3/config.h b/configs/BROTHERHOBBYF722V3/config.h
deleted file mode 100644
index 0a41b146..00000000
--- a/configs/BROTHERHOBBYF722V3/config.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * This file is part of Betaflight.
- *
- * Betaflight is free software. You can redistribute this software
- * and/or modify this software under the terms of the GNU General
- * Public License as published by the Free Software Foundation,
- * either version 3 of the License, or (at your option) any later
- * version.
- *
- * Betaflight is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * See the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this software.
- *
- * If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#define FC_TARGET_MCU     STM32F7X2
-#define BOARD_NAME        BHF722V3
-#define MANUFACTURER_ID   BROT
-
-#define USE_ACC
-#define USE_ACC_SPI_ICM42688P
-#define USE_GYRO
-#define USE_GYRO_SPI_ICM42688P
-#define USE_BARO
-#define USE_BARO_BMP280
-#define USE_BARO_MS5611
-#define USE_BARO_DPS310
-#define USE_FLASH
-#define USE_FLASH_W25N02K
-#define USE_MAX7456
-
-#define BEEPER_PIN           PC3
-#define MOTOR1_PIN           PB0
-#define MOTOR2_PIN           PB1
-#define MOTOR3_PIN           PB10
-#define MOTOR4_PIN           PB11
-#define MOTOR5_PIN           PB4
-#define MOTOR6_PIN           PB5
-#define MOTOR7_PIN           PC8
-#define MOTOR8_PIN           PC9
-#define RX_PPM_PIN           PA3
-#define LED_STRIP_PIN        PA15
-#define UART1_TX_PIN         PA9
-#define UART2_TX_PIN         PA2
-#define UART3_TX_PIN         PC10
-#define UART4_TX_PIN         PA0
-#define UART5_TX_PIN         PC12
-#define UART6_TX_PIN         PC6
-#define UART1_RX_PIN         PA10
-#define UART2_RX_PIN         PA3
-#define UART3_RX_PIN         PC11
-#define UART4_RX_PIN         PA1
-#define UART5_RX_PIN         PD2
-#define UART6_RX_PIN         PC7
-#define I2C1_SCL_PIN         PB8
-#define I2C1_SDA_PIN         PB9
-#define LED0_PIN             PA8
-#define SPI1_SCK_PIN         PA5
-#define SPI2_SCK_PIN         PB13
-#define SPI1_SDI_PIN         PA6
-#define SPI2_SDI_PIN         PB14
-#define SPI1_SDO_PIN         PA7
-#define SPI2_SDO_PIN         PB15
-#define CAMERA_CONTROL_PIN   PB7
-#define ADC_VBAT_PIN         PC2
-#define ADC_RSSI_PIN         PC0
-#define ADC_CURR_PIN         PC1
-#define FLASH_CS_PIN         PB6
-#define MAX7456_SPI_CS_PIN   PB12
-#define GYRO_1_EXTI_PIN      PC4
-#define GYRO_1_CS_PIN        PA4
-
-#define TIMER_PIN_MAPPING \
-        TIMER_PIN_MAP(0,  PB6,  1, -1)\
-        TIMER_PIN_MAP(1,  PB7,  1,  0)\
-        TIMER_PIN_MAP(2,  PB8,  1,  0)\
-        TIMER_PIN_MAP(3,  PB9,  1, -1)\
-        TIMER_PIN_MAP(4,  PB0,  2,  0)\
-        TIMER_PIN_MAP(5,  PB1,  2,  0)\
-        TIMER_PIN_MAP(6,  PB5,  1,  0)\
-        TIMER_PIN_MAP(7,  PB4,  1,  0)\
-        TIMER_PIN_MAP(8,  PA8,  1,  0)\
-        TIMER_PIN_MAP(9,  PA3,  2,  0)\
-        TIMER_PIN_MAP(10, PB3,  1,  0)\
-        TIMER_PIN_MAP(11, PC9,  2,  0)\
-        TIMER_PIN_MAP(12, PB10, 1,  0)\
-        TIMER_PIN_MAP(13, PB11, 1,  0)\
-        TIMER_PIN_MAP(14, PC8,  2,  0)\
-        TIMER_PIN_MAP(15, PA15, 1,  0)
-
-#define ADC1_DMA_OPT        0
-
-#define MAG_I2C_INSTANCE                    (I2CDEV_1)
-#define BARO_I2C_INSTANCE                   (I2CDEV_1)
-// #define SERIALRX_PROVIDER                   CRSF
-#define DEFAULT_BLACKBOX_DEVICE             BLACKBOX_DEVICE_FLASH
-#define DEFAULT_CURRENT_METER_SOURCE        CURRENT_METER_ADC
-#define DEFAULT_VOLTAGE_METER_SOURCE        VOLTAGE_METER_ADC
-#define DEFAULT_CURRENT_METER_SCALE         386
-#define BEEPER_INVERTED
-#define FLASH_SPI_INSTANCE                  SPI2
-#define MAX7456_SPI_INSTANCE                SPI2   
-#define GYRO_1_SPI_INSTANCE                 SPI1
-#define GYRO_1_ALIGN                        CW90_DEG
-#define SYSTEM_HSE_MHZ                      8       
-#define DEFAULT_DSHOT_BURST                 DSHOT_DMAR_ON
-#define SERIALRX_UART                       SERIAL_PORT_USART2
-#define MSP_DISPLAYPORT_UART                SERIAL_PORT_USART1
-