From b98adf6f5e1acfaf4c3f9364579928cdf75a0df9 Mon Sep 17 00:00:00 2001 From: ot0tot <36753790+ot0tot@users.noreply.github.com> Date: Fri, 14 Jun 2024 05:24:04 -0400 Subject: [PATCH] Remove nonconforming targets (#428) Remove targets that did not comply with the target submission policy: https://betaflight.com/docs/development/manufacturer/requirements-for-submission-of-targets --- configs/MAMBAF435_2023A/config.h | 128 ------------------------------- 1 file changed, 128 deletions(-) delete mode 100644 configs/MAMBAF435_2023A/config.h diff --git a/configs/MAMBAF435_2023A/config.h b/configs/MAMBAF435_2023A/config.h deleted file mode 100644 index 18e43dbc..00000000 --- a/configs/MAMBAF435_2023A/config.h +++ /dev/null @@ -1,128 +0,0 @@ -/* - * This file is part of Betaflight. - * - * Betaflight is free software. You can redistribute this software - * and/or modify this software under the terms of the GNU General - * Public License as published by the Free Software Foundation, - * either version 3 of the License, or (at your option) any later - * version. - * - * Betaflight is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this software. - * - * If not, see . - */ - -#pragma once - -#define FC_TARGET_MCU AT32F435G - -#define BOARD_NAME MAMBAF435_2023A -#define MANUFACTURER_ID DIAT - -#define USE_BARO -#define USE_BARO_DPS310 - -#define USE_GYRO -#define USE_GYRO_SPI_ICM42688P -#define USE_ACC -#define USE_ACC_SPI_ICM42688P - -#define USE_FLASH -#define USE_FLASH_W25Q128FV - - -#define USE_MAX7456 -#define MAX7456_SPI_CS_PIN PB12 -#define MAX7456_SPI_INSTANCE SPI2 - -#define BEEPER_PIN PB11 -#define BEEPER_INVERTED - -#define MOTOR1_PIN PC9 -#define MOTOR2_PIN PC8 -#define MOTOR3_PIN PC7 -#define MOTOR4_PIN PC6 -#define MOTOR5_PIN PA0 -#define MOTOR6_PIN PA1 -#define MOTOR7_PIN PA2 -#define MOTOR8_PIN PA3 - -#define SERVO1_PIN PA9 -#define SERVO2_PIN PA10 - -#define LED_STRIP_PIN PA6 - -#define UART1_TX_PIN PB6 -#define UART2_TX_PIN PA8 -#define UART3_TX_PIN PC4 -#define UART4_TX_PIN PC10 -#define UART5_TX_PIN PC12 -#define UART6_TX_PIN PA4 -#define UART7_TX_PIN PC0 - - -#define UART1_RX_PIN PB7 -#define UART2_RX_PIN PB0 -#define UART3_RX_PIN PC5 -#define UART4_RX_PIN PC11 -#define UART5_RX_PIN PD2 -#define UART6_RX_PIN PA5 - -#define INVERTER_PIN_UART2 PC0 - -#define I2C1_SCL_PIN PB8 -#define I2C1_SDA_PIN PB9 - -#define LED0_PIN PC14 -#define LED1_PIN PC15 - -#define SPI1_SCK_PIN PA5 -#define SPI2_SCK_PIN PB13 -#define SPI3_SCK_PIN PB3 - -#define SPI1_SDI_PIN PA6 -#define SPI2_SDI_PIN PB14 -#define SPI3_SDI_PIN PB4 - -#define SPI1_SDO_PIN PA7 -#define SPI2_SDO_PIN PB15 -#define SPI3_SDO_PIN PB5 - -#define ADC_VBAT_PIN PC1 -#define ADC_CURR_PIN PC2 - -#define PINIO1_PIN PC3 -#define PINIO2_PIN PA7 - -#define FLASH_CS_PIN PB10 -#define FLASH_SPI_INSTANCE SPI2 - -#define GYRO_1_EXTI_PIN PA15 -#define GYRO_1_CS_PIN PC13 -#define GYRO_1_SPI_INSTANCE SPI3 -#define GYRO_1_ALIGN CW270_DEG - -#define TIMER_PIN_MAPPING TIMER_PIN_MAP( 0, LED_STRIP_PIN, 1, 8 ) \ - TIMER_PIN_MAP( 1, SERVO1_PIN, 1, 9 ) \ - TIMER_PIN_MAP( 2, SERVO2_PIN, 1, 10) \ - TIMER_PIN_MAP( 3, BEEPER_PIN, 1, 7 ) - -#define ADC1_DMA_OPT 11 -#define SPI1_TX_DMA_OPT 12 -#define SPI2_TX_DMA_OPT 13 -#define SPI3_TX_DMA_OPT 14 - -#define ADC_INSTANCE ADC1 -#define BARO_I2C_INSTANCE (I2CDEV_1) - -#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH - -#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC -#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC