diff --git a/configs/DREAMFLYF722/config.h b/configs/DREAMFLYF722/config.h
new file mode 100644
index 00000000..5d52f129
--- /dev/null
+++ b/configs/DREAMFLYF722/config.h
@@ -0,0 +1,128 @@
+/*
+ * This file is part of Betaflight.
+ *
+ * Betaflight is free software. You can redistribute this software
+ * and/or modify this software under the terms of the GNU General
+ * Public License as published by the Free Software Foundation,
+ * either version 3 of the License, or (at your option) any later
+ * version.
+ *
+ * Betaflight is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this software.
+ *
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define FC_TARGET_MCU     STM32FX2
+#define BOARD_NAME DREAMFLYF722
+#define MANUFACTURER_ID DFRC
+
+#define USE_ACC
+#define USE_ACC_SPI_MPU6000
+#define USE_ACC_SPI_ICM42688P
+#define USE_ACCGYRO_BMI270
+
+#define USE_BARO
+#define USE_BARO_DPS310
+#define USE_BARO_BMP280
+
+#define USE_FLASH
+#define USE_FLASH_W25Q128FV
+
+#define USE_GYRO
+#define USE_GYRO_SPI_MPU6000
+#define USE_GYRO_SPI_ICM42688P
+
+#define USE_MAX7456
+
+#define BEEPER_PIN PC13
+#define MOTOR1_PIN PA9
+#define MOTOR2_PIN PA8
+#define MOTOR3_PIN PC9
+#define MOTOR4_PIN PC8
+#define MOTOR5_PIN PB0
+#define MOTOR6_PIN PB1
+#define MOTOR7_PIN PA10
+#define MOTOR8_PIN PB4
+
+#define LED_STRIP_PIN PB3
+
+#define UART1_TX_PIN PB6
+#define UART2_TX_PIN PA2
+#define UART3_TX_PIN PB10
+#define UART4_TX_PIN PA0
+#define UART5_TX_PIN PC12
+#define UART6_TX_PIN PC6
+#define UART1_RX_PIN PB7
+#define UART2_RX_PIN PA3
+#define UART3_RX_PIN PB11
+#define UART4_RX_PIN PA1
+#define UART5_RX_PIN PD2
+#define UART6_RX_PIN PC7
+
+#define I2C1_SCL_PIN PB8
+#define I2C1_SDA_PIN PB9
+#define LED0_PIN PC15
+
+#define SPI1_SCK_PIN PA5
+#define SPI2_SCK_PIN PB13
+#define SPI3_SCK_PIN PC10
+#define SPI1_SDI_PIN PA6
+#define SPI2_SDI_PIN PB14
+#define SPI3_SDI_PIN PC11
+#define SPI1_SDO_PIN PA7
+#define SPI2_SDO_PIN PB15
+#define SPI3_SDO_PIN PB5
+
+#define ADC_VBAT_PIN PC1
+#define ADC_RSSI_PIN PC2
+#define ADC_CURR_PIN PC3
+
+#define PINIO1_PIN PC2         //IO1 is used for camera switching
+#define PINIO2_PIN PC0      
+
+#define FLASH_CS_PIN PA15
+#define MAX7456_SPI_CS_PIN PB12
+#define GYRO_1_EXTI_PIN PC4
+#define GYRO_1_CS_PIN PA4
+
+#define TIMER_PIN_MAPPING \
+    TIMER_PIN_MAP( 0, MOTOR1_PIN, 1, 0) \
+    TIMER_PIN_MAP( 1, MOTOR2_PIN, 1, 0) \
+    TIMER_PIN_MAP( 2, MOTOR3_PIN, 2, 0) \
+    TIMER_PIN_MAP( 3, MOTOR4_PIN, 2, 0) \
+    TIMER_PIN_MAP( 4, MOTOR5_PIN, 2, 0) \
+    TIMER_PIN_MAP( 5, MOTOR6_PIN, 2, 0) \
+    TIMER_PIN_MAP( 6, MOTOR7_PIN, 1, 0) \
+    TIMER_PIN_MAP( 7, MOTOR8_PIN, 1, 0) \
+    TIMER_PIN_MAP( 8, LED_STRIP_PIN, 1, 0)
+
+#define ADC3_DMA_OPT 0
+
+#define SERIALRX_UART SERIAL_PORT_USART2
+
+#define MAG_I2C_INSTANCE (I2CDEV_1)
+#define BARO_I2C_INSTANCE (I2CDEV_1)
+#define ADC_INSTANCE ADC3
+#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH
+#define DEFAULT_DSHOT_BURST DSHOT_DMAR_ON
+#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC
+#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC
+#define BEEPER_INVERTED
+#define MAX7456_SPI_INSTANCE SPI2
+#define PINIO1_CONFIG 129
+#define PINIO2_CONFIG 129
+#define PINIO1_BOX 40
+#define PINIO2_BOX 41
+#define FLASH_SPI_INSTANCE SPI3
+#define GYRO_1_SPI_INSTANCE SPI1
+#define GYRO_1_ALIGN CW90_DEG
+#define GYRO_1_ALIGN_YAW 900