diff --git a/configs/IFLIGHT_BLITZ_H7_PRO/config.h b/configs/IFLIGHT_BLITZ_H7_PRO/config.h new file mode 100644 index 00000000..59af5280 --- /dev/null +++ b/configs/IFLIGHT_BLITZ_H7_PRO/config.h @@ -0,0 +1,147 @@ +/* + * This file is part of Betaflight. + * + * Betaflight is free software. You can redistribute this software + * and/or modify this software under the terms of the GNU General + * Public License as published by the Free Software Foundation, + * either version 3 of the License, or (at your option) any later + * version. + * + * Betaflight is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this software. + * + * If not, see . + */ + +#pragma once + +#define FC_TARGET_MCU STM32H743 + +#define BOARD_NAME IFLIGHT_BLITZ_H7_PRO +#define MANUFACTURER_ID IFRC + +#define USE_ACC +#define USE_ACC_SPI_ICM42688P +#define USE_BARO +#define USE_BARO_DPS310 +#define USE_GYRO +#define USE_GYRO_SPI_ICM42688P +#define USE_MAX7456 +#define USE_SDCARD + +#define BEEPER_PIN PA15 +#define MOTOR1_PIN PB0 +#define MOTOR2_PIN PB1 +#define MOTOR3_PIN PA0 +#define MOTOR4_PIN PA1 +#define MOTOR5_PIN PA2 +#define MOTOR6_PIN PA3 +#define MOTOR7_PIN PD12 +#define MOTOR8_PIN PD13 +#define RX_PPM_PIN PA3 +#define LED_STRIP_PIN PA8 +#define SERVO1_PIN PD14 +#define SERVO2_PIN PD15 +#define SERVO3_PIN PE5 +#define SERVO4_PIN PE6 +#define UART1_TX_PIN PA9 +#define UART2_TX_PIN PD5 +#define UART3_TX_PIN PD8 +#define UART4_TX_PIN PB9 +#define UART6_TX_PIN PC6 +#define UART7_TX_PIN PE8 +#define UART8_TX_PIN PE1 +#define UART1_RX_PIN PA10 +#define UART2_RX_PIN PD6 +#define UART3_RX_PIN PD9 +#define UART4_RX_PIN PB8 +#define UART6_RX_PIN PC7 +#define UART7_RX_PIN PE7 +#define UART8_RX_PIN PE0 +#define I2C1_SCL_PIN PB6 +#define I2C1_SDA_PIN PB7 +#define I2C2_SCL_PIN PB10 +#define I2C2_SDA_PIN PB11 +#define LED1_PIN PE3 +#define LED2_PIN PE4 +#define SPI1_SCK_PIN PA5 +#define SPI2_SCK_PIN PB13 +#define SPI3_SCK_PIN PB3 +#define SPI4_SCK_PIN PE12 +#define SPI1_SDI_PIN PA6 +#define SPI2_SDI_PIN PB14 +#define SPI3_SDI_PIN PB4 +#define SPI4_SDI_PIN PE13 +#define SPI1_SDO_PIN PD7 +#define SPI2_SDO_PIN PB15 +#define SPI3_SDO_PIN PB5 +#define SPI4_SDO_PIN PE14 +#define ADC_VBAT_PIN PC0 +#define ADC_RSSI_PIN PC5 +#define ADC_CURR_PIN PC1 +#define ADC_EXTERNAL1_PIN PC4 +#define SDIO_CK_PIN PC12 +#define SDIO_CMD_PIN PD2 +#define SDIO_D0_PIN PC8 +#define SDIO_D1_PIN PC9 +#define SDIO_D2_PIN PC10 +#define SDIO_D3_PIN PC11 +#define PINIO1_PIN PD10 +#define PINIO2_PIN PD11 +#define MAX7456_SPI_CS_PIN PB12 +#define GYRO_1_EXTI_PIN PB2 +#define GYRO_1_CS_PIN PC15 + +#define TIMER_PIN_MAPPING \ + TIMER_PIN_MAP(0, PB0, 2, 0) \ + TIMER_PIN_MAP(1, PB1, 2, 1) \ + TIMER_PIN_MAP(2, PA0, 2, 2) \ + TIMER_PIN_MAP(3, PA1, 2, 3) \ + TIMER_PIN_MAP(4, PA2, 2, 4) \ + TIMER_PIN_MAP(5, PA3, 2, 5) \ + TIMER_PIN_MAP(6, PD12, 1, 6) \ + TIMER_PIN_MAP(7, PD13, 1, 7) \ + TIMER_PIN_MAP(8, PD14, 1, 12) \ + TIMER_PIN_MAP(9, PD15, 1, -1) \ + TIMER_PIN_MAP(10, PE5, 1, 0) \ + TIMER_PIN_MAP(11, PE6, 1, -1) \ + TIMER_PIN_MAP(12, PA8, 1, 14) \ + TIMER_PIN_MAP(13, PA15, 1, 0) \ + TIMER_PIN_MAP(14, PC7, 2, 0) \ + TIMER_PIN_MAP(15, PC6, 2, 0) \ + TIMER_PIN_MAP(16, PB8, 1, 0) \ + TIMER_PIN_MAP(17, PB9, 1, 0) + +#define ADC1_DMA_OPT 8 +#define ADC3_DMA_OPT 9 +#define TIMUP1_DMA_OPT 0 +#define TIMUP2_DMA_OPT 0 +#define TIMUP3_DMA_OPT 2 +#define TIMUP4_DMA_OPT 1 +#define TIMUP5_DMA_OPT 0 +#define TIMUP8_DMA_OPT 0 + +#define GYRO_1_SPI_INSTANCE SPI1 +#define MAX7456_SPI_INSTANCE SPI2 +#define MAG_I2C_INSTANCE I2CDEV_1 +#define BARO_I2C_INSTANCE I2CDEV_2 + +#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_SDCARD +#define SDIO_DEVICE SDIODEV_1 +#define SDIO_USE_4BIT 1 + +#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC +#define DEFAULT_CURRENT_METER_SCALE 200 +#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC +#define DEFAULT_VOLTAGE_METER_SCALE 210 + +#define PINIO1_BOX 40 +#define PINIO2_BOX 41 + +#define BEEPER_INVERTED