debug_attributes.md

There are many User/Workspace Settings to control things globally. You can find these in the VSCode Settings UI. launch.json can override some of those settings. There is a lot of functionality that is available via Settings and some may be useful in a team environment and/or can be used across all cortex-debug sessions

The following attributes (properties) can be used in your launch.json to control various aspects of debugging. Also IntelliSense is an invaluable aid while editing launch.json. With IntelliSense, you can hover over an attribute to get more information and/or help you find attributes (just start typing a double-quote, use Tab key) and provide defaults/options.

If the type is marked as {...} it means that it is a complex item can have multiple types. Possibly consult our Wiki

Attribute	Type	Launch/ Attach	Description
BMPGDBSerialPort	string	Both	The serial port for the Black Magic Probe GDB Server. On Windows this will be "COM", on Linux this will be something similar to /dev/ttyACM0, on OS X something like /dev/cu.usbmodemE2C0C4C6 (do not use tty versions on OS X)
armToolchainPath	string	Both	This setting can be used to override the armToolchainPath user setting for a particular launch configuration. This should be the path where arm-none-eabi-gdb, arm-none-eabi-objdump and arm-none-eabi-nm are located.
boardId	string	Both	PyOCD Board Identifier. Needed if multiple compatible boards are connected.
breakAfterReset	boolean	Both	Applies to Restart/Reset/Launch, halt debugger after a reset. Ignored if runToEntryPoint is used.
chainedConfigurations	object	Both	An object describing how additional configurations should be launched
chainedConfigurations .delayMs	number	Both	Default delay in milliseconds for a certain amount of milliseconds to begin launch. Inherited by children
chainedConfigurations .detached	boolean	Both	Related or independent server sessions. Set to true for servers like 'JLink'. Inherited by children
chainedConfigurations .enabled	boolean	Both	Enable/Disable entire set of chained configurations
chainedConfigurations .inherits	string[]	Both	List of properties to inherit from parent. Sorry, no IntelliSense
chainedConfigurations .launches	object[]	Both	undefined
chainedConfigurations .lifecycleManagedByParent	boolean	Both	Are Restart/Reset/Stop/Disconnect shared? All life-cycle management done as a group by parent/root. Inherited by children
chainedConfigurations .overrides	object	Both	Values to override/set in this child configuration. A set of name/value pairs. Set value to 'null' (no quotes) to delete. Sorry, no IntelliSense
chainedConfigurations .waitOnEvent	string	Both	Event to wait for. 'postStart' means wait for gdb-server connecting, 'postInit' is after init commands are completed by gdb. Inherited by children
cmsisPack	string	Both	Path to a CMSIS-Pack file. Use to add extra device support.
configFiles	string[]	Both	OpenOCD/PE GDB Server configuration file(s) to use when debugging (OpenOCD -f option)
cpu	string	Both	CPU Type Selection - used for QEMU server type
ctiOpenOCDConfig	object	Launch	Experimental. Does not work yet
ctiOpenOCDConfig .enabled	boolean	Launch	Enable/Disable Cross Trigger Interface/Matrix for synchronized pause/resume
ctiOpenOCDConfig .initCommands	string[]	Launch	List of OpenOCD TCL commands to initialize the CTI/CTM infrastructure (if any)
ctiOpenOCDConfig .pauseCommands	string[]	Launch	List of OpenOCD TCL commands to pause all processors
ctiOpenOCDConfig .resumeCommands	string[]	Launch	List of OpenOCD TCL commands to resume all processors
cwd	string	Both	Directory to run commands from
debuggerArgs	array	Both	Additional arguments to pass to GDB command line
device	string	Both	Target Device Identifier
executable	string	Both	Path of executable for symbols and program information. See also loadFiles, symbolFiles
gdbPath	string	Both	This setting can be used to override the GDB path user/workspace setting for a particular launch configuration. This should be the full pathname to the executable (or name of the executable if it is in your PATH). Note that other toolchain executables with the configured prefix must still be available.
gdbTarget	string	Both	For externally (servertype = "external") controlled GDB Servers you must specify the GDB target to connect to. This can either be a "hostname:port" combination or path to a serial port
graphConfig	{object}	Both	Description of how graphing can be done. See our Wiki for details
interface	string	Both	Debug Interface type to use for connections (defaults to SWD) - Used for J-Link, ST-LINK and BMP probes.
ipAddress	string	Both	IP Address for networked J-Link Adapter
jlinkscript	string	Both	J-Link script file - optional input file for customizing J-Link actions.
liveWatch	object	Both	An object with parameters for Live Watch
liveWatch .enabled	boolean	Both	Enable/Disable Live Watch. Only applies to OpenOCD
liveWatch .samplesPerSecond	number	Both	Maximum number of samples per second. Different from GUI refresh-rate, which is a user/workspace setting
loadFiles	string[]	Launch	List of files (hex/bin/elf files) to load/program instead of the executable file. Symbols are not loaded (see symbolFiles). Can be an empty list to specify none. If this property does not exist, then the executable is used to program the device
machine	string	Both	Machine Type Selection - used for QEMU server type
numberOfProcessors	number	Both	Number of processors/cores in the target device.
objdumpPath	string	Both	This setting can be used to override the objdump (used to find globals/statics) path user/workspace setting for a particular launch configuration. This should be the full pathname to the executable (or name of the executable if it is in your PATH). Note that other toolchain executables with the configured prefix must still be available. The program 'nm' is also expected alongside
openOCDLaunchCommands	string[]	Both	OpenOCD command(s) after configuration files are loaded (-c options)
openOCDPreConfigLaunchCommands	string[]	Both	OpenOCD command(s) before configuration files are loaded (-c options)
overrideAttachCommands	string[]	Attach	You can use this to property to override the commands that are normally executed as part of attaching to a running target. In most cases it is preferable to use preAttachCommands and postAttachCommands to customize the GDB attach sequence.
overrideGDBServerStartedRegex	string	Both	You can supply a regular expression (https://developer.mozilla.org/en-US/docs/Web/JavaScript/Guide/Regular_Expressions) in the configuration property to override the output from the GDB Server that is looked for to determine if the GDB Server has started. Under most circumstances this will not be necessary - but could be needed as a result of a change in the output of a GDB Server making it incompatible with cortex-debug. This property has no effect for bmp or external GDB Server types.
overrideLaunchCommands	string[]	Launch	You can use this to property to override the commands that are normally executed as part of flashing and launching the target. In most cases it is preferable to use preLaunchCommands and postLaunchCommands to customize the GDB launch sequence.
overrideResetCommands	string[]	Both	You can use this to property to override the commands that are normally executed as part of reset the target. When not defined this will have the same value of overrideRestartCommands. In most cases it is preferable to use preResetCommands and postResetCommands to customize the GDB reset sequence.
overrideRestartCommands	string[]	Both	You can use this to property to override the commands that are normally executed as part of restarting the target. In most cases it is preferable to use preRestartCommands and postRestartCommands to customize the GDB restart sequence.
postAttachCommands	string[]	Attach	Additional GDB Commands to be executed after the main attach sequence has finished.
postLaunchCommands	string[]	Launch	Additional GDB Commands to be executed after the main launch sequence has finished.
postResetCommands	string[]	Both	Additional GDB Commands to be executed at the end of the reset sequence. When not defined this will have the same value of postRestartCommands.
postRestartCommands	string[]	Both	Additional GDB Commands to be executed at the end of the restart sequence.
postRestartSessionCommands	string[]	Both	Additional GDB Commands to be executed at the end of the re-start sequence, after a debug session has already started.
postStartSessionCommands	string[]	Both	Additional GDB Commands to be executed at the end of the start sequence, after a debug session has already started and runToEntryPoint is not specified.
powerOverBMP	string	Both	Power up the board over Black Magic Probe. "powerOverBMP" : "enable" or "powerOverBMP" : "disable". If not set it will use the last power state.
preAttachCommands	string[]	Attach	Additional GDB Commands to be executed at the start of the main attach sequence (immediately after attaching to target).
preLaunchCommands	string[]	Launch	Additional GDB Commands to be executed at the start of the main launch sequence (immediately after attaching to target).
preResetCommands	string[]	Both	Additional GDB Commands to be executed at the beginning of the reset sequence (after interrupting execution). When not defined this will have the same value of preRestartCommands.
preRestartCommands	string[]	Both	Additional GDB Commands to be executed at the beginning of the restart sequence (after interrupting execution).
rtos	string	Both	RTOS being used. For JLink this can be Azure, ChibiOS, embOS, FreeRTOS, NuttX, Zephyr or the path to a custom JLink RTOS Plugin library. For OpenOCD this can be auto (recommended), FreeRTOS, ThreadX, chibios, Chromium-EC, eCos, embKernel, linux, mqx, nuttx, RIOT, uCOS-III, or Zephyr.
rttConfig	object	Both	SEGGER's Real Time Trace (RTT) and supported by JLink, OpenOCD and perhaps others in the future
rttConfig .address	string	Both	Address to start searching for the RTT control block. Use "auto" for Cortex-Debug to use the address from elf file
rttConfig .clearSearch	boolean	Both	When true, clears the search-string. Only applicable when address is "auto"
rttConfig .decoders	{object}	Both	SWO Decoder Configuration
rttConfig .enabled	boolean	Both	Enable/Disable RTT
rttConfig .polling_interval	number	Both	number of milliseconds (> 0) to wait for check for data on out channels. Only for OpenOCD
rttConfig .rtt_start_retry	number	Both	Keep trying to start RTT for OpenOCD until it succeeds with given internal in milliseconds. <= 0 means do not retry. Only for OpenOCD
rttConfig .searchId	string	Both	A string to search for to find the RTT control block. If 'address' is 'auto', use ONLY if you have a custom RTT implementation
rttConfig .searchSize	number	Both	Number of bytes to search for the RTT control block. If 'address' is 'auto', use ONLY if you have a custom RTT implementation
runToEntryPoint	string	Both	Applies to Launch/Restart/Reset, ignored for Attach. If enabled the debugger will run until the start of the given function.
searchDir	string[]	Both	OpenOCD directories to search for config files and scripts (-s option). If no search directories are specified, it defaults to the configured cwd.
serialNumber	string	Both	J-Link or ST-LINK Serial Number - only needed if multiple J-Links/ST-LINKs are connected to the computer
serverArgs	string[]	Both	Additional arguments to pass to GDB Server command line
serverpath	string	Both	This setting can be used to override the GDB Server path user/workspace setting for a particular launch configuration. It is the full pathname to the executable or name of executable if it is in your PATH
servertype	string	Both	GDB Server type - supported types are jlink, openocd, pyocd, pe, stlink, stutil, qemu, bmp and external. For "external", please read our Wiki
showDevDebugOutput	string	Both	Used to debug this extension. Prints all GDB responses to the console. 'raw' prints gdb responses, 'parsed' prints results after parsing, 'both' prints both. 'vscode' shows raw and VSCode interactions
showDevDebugTimestamps	boolean	Both	Show timestamps when 'showDevDebugOutput' is enabled
stlinkPath	string	Both	Path to the ST-LINK_gdbserver executable. If not set then ST-LINK_gdbserver (ST-LINK_gdbserver.exe on Windows) must be on the system path.
stm32cubeprogrammer	string	Both	This path is normally resolved to the installed STM32CubeIDE or STM32CubeProgrammer but can be overridden here.
svdFile	string	Both	This is for 'XPERIPHERALS' window provided by 'mcu-debug.peripheral-viewer'. It can be a simple file name or more based on a CMSIS pack or deviceName. See 'mcu-debug.peripheral-viewer' for format
svdPath	string	Both	This is for 'XPERIPHERALS' window provided by 'mcu-debug.peripheral-viewer' and 'Embedded Tools' Extension from Microsoft. It can be a simple file name. For 'mcu-debug.peripheral-viewer' or more based on a CMSIS pack or deviceName. See 'mcu-debug.peripheral-viewer' for format
swoConfig	object	Both	Description of SWO can be configured. Also see our Wiki for details
swoConfig .cpuFrequency	number	Both	Target CPU frequency in Hz.
swoConfig .decoders	{object}	Both	SWO Decoder Configuration
swoConfig .enabled	boolean	Both	Enable SWO decoding.
swoConfig .source	string	Both	Source for SWO data. Can either be "probe" to get directly from debug probe, or a serial port device to use a serial port external to the debug probe.
swoConfig .swoFrequency	number	Both	SWO frequency in Hz.
swoConfig .swoPath	string	Both	Path name when source is "file" or "serial". Typically a /path-name or a serial-port-name
swoConfig .swoPort	string	Both	When server is "external" && source is "socket", port to connect to. Format [host:]port
symbolFiles	object[]	Both	List of ELF files to load symbols from instead of the executable file. Program information is ignored (see loadFiles). Can be an empty list to specify none. If this property does not exist, then the executable is used for symbols
targetId	string | number	Both	On BMP this is the ID number that should be passed to the attach command (defaults to 1); for PyOCD this is the target identifier (only needed for custom hardware)
targetProcessor	number	Both	The processor you want to debug. Zero based integer index. Must be less than 'numberOfProcessors'
toolchainPrefix	string	Both	This setting can be used to override the toolchainPrefix user setting for a particular launch configuration. Default = "arm-none-eabi"
v1	boolean	Both	For st-util only. Set this to true if your debug probe is a ST-Link V1 (for example, the ST-Link on the STM32 VL Discovery is a V1 device). When set to false a ST-Link V2 device is used.