Get qemu working on Solaris #3
Open
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
|
Thank you very much for your work! The qemu patches should go through the review on the qemu-devel@ mailing list. Can you please submit them there? |
artyom-tarasenko
pushed a commit
that referenced
this pull request
May 15, 2017
Running postcopy-test with ASAN produces the following error:
QTEST_QEMU_BINARY=ppc64-softmmu/qemu-system-ppc64 tests/postcopy-test
...
=================================================================
==23641==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7f1556600000 at pc 0x55b8e9d28208 bp 0x7f1555f4d3c0 sp 0x7f1555f4d3b0
READ of size 8 at 0x7f1556600000 thread T6
#0 0x55b8e9d28207 in htab_save_first_pass /home/elmarco/src/qq/hw/ppc/spapr.c:1528
#1 0x55b8e9d2939c in htab_save_iterate /home/elmarco/src/qq/hw/ppc/spapr.c:1665
#2 0x55b8e9beae3a in qemu_savevm_state_iterate /home/elmarco/src/qq/migration/savevm.c:1044
#3 0x55b8ea677733 in migration_thread /home/elmarco/src/qq/migration/migration.c:1976
#4 0x7f15845f46c9 in start_thread (/lib64/libpthread.so.0+0x76c9)
#5 0x7f157d9d0f7e in clone (/lib64/libc.so.6+0x107f7e)
0x7f1556600000 is located 0 bytes to the right of 2097152-byte region [0x7f1556400000,0x7f1556600000)
allocated by thread T0 here:
#0 0x7f159bb76980 in posix_memalign (/lib64/libasan.so.3+0xc7980)
#1 0x55b8eab185b2 in qemu_try_memalign /home/elmarco/src/qq/util/oslib-posix.c:106
#2 0x55b8eab186c8 in qemu_memalign /home/elmarco/src/qq/util/oslib-posix.c:122
#3 0x55b8e9d268a8 in spapr_reallocate_hpt /home/elmarco/src/qq/hw/ppc/spapr.c:1214
#4 0x55b8e9d26e04 in ppc_spapr_reset /home/elmarco/src/qq/hw/ppc/spapr.c:1261
#5 0x55b8ea12e913 in qemu_system_reset /home/elmarco/src/qq/vl.c:1697
#6 0x55b8ea13fa40 in main /home/elmarco/src/qq/vl.c:4679
#7 0x7f157d8e9400 in __libc_start_main (/lib64/libc.so.6+0x20400)
Thread T6 created by T0 here:
#0 0x7f159bae0488 in __interceptor_pthread_create (/lib64/libasan.so.3+0x31488)
#1 0x55b8eab1d9cb in qemu_thread_create /home/elmarco/src/qq/util/qemu-thread-posix.c:465
#2 0x55b8ea67874c in migrate_fd_connect /home/elmarco/src/qq/migration/migration.c:2096
#3 0x55b8ea66cbb0 in migration_channel_connect /home/elmarco/src/qq/migration/migration.c:500
#4 0x55b8ea678f38 in socket_outgoing_migration /home/elmarco/src/qq/migration/socket.c:87
#5 0x55b8eaa5a03a in qio_task_complete /home/elmarco/src/qq/io/task.c:142
#6 0x55b8eaa599cc in gio_task_thread_result /home/elmarco/src/qq/io/task.c:88
#7 0x7f15823e38e6 (/lib64/libglib-2.0.so.0+0x468e6)
SUMMARY: AddressSanitizer: heap-buffer-overflow /home/elmarco/src/qq/hw/ppc/spapr.c:1528 in htab_save_first_pass
index seems to be wrongly incremented, unless I miss something that
would be worth a comment.
Signed-off-by: Marc-André Lureau <[email protected]>
Signed-off-by: David Gibson <[email protected]>
artyom-tarasenko
pushed a commit
that referenced
this pull request
May 15, 2017
During block job completion, nothing is preventing
block_job_defer_to_main_loop_bh from being called in a nested
aio_poll(), which is a trouble, such as in this code path:
qmp_block_commit
commit_active_start
bdrv_reopen
bdrv_reopen_multiple
bdrv_reopen_prepare
bdrv_flush
aio_poll
aio_bh_poll
aio_bh_call
block_job_defer_to_main_loop_bh
stream_complete
bdrv_reopen
block_job_defer_to_main_loop_bh is the last step of the stream job,
which should have been "paused" by the bdrv_drained_begin/end in
bdrv_reopen_multiple, but it is not done because it's in the form of a
main loop BH.
Similar to why block jobs should be paused between drained_begin and
drained_end, BHs they schedule must be excluded as well. To achieve
this, this patch forces draining the BH in BDRV_POLL_WHILE.
As a side effect this fixes a hang in block_job_detach_aio_context
during system_reset when a block job is ready:
#0 0x0000555555aa79f3 in bdrv_drain_recurse
#1 0x0000555555aa825d in bdrv_drained_begin
#2 0x0000555555aa8449 in bdrv_drain
#3 0x0000555555a9c356 in blk_drain
#4 0x0000555555aa3cfd in mirror_drain
#5 0x0000555555a66e11 in block_job_detach_aio_context
#6 0x0000555555a62f4d in bdrv_detach_aio_context
#7 0x0000555555a63116 in bdrv_set_aio_context
#8 0x0000555555a9d326 in blk_set_aio_context
#9 0x00005555557e38da in virtio_blk_data_plane_stop
#10 0x00005555559f9d5f in virtio_bus_stop_ioeventfd
#11 0x00005555559fa49b in virtio_bus_stop_ioeventfd
#12 0x00005555559f6a18 in virtio_pci_stop_ioeventfd
#13 0x00005555559f6a18 in virtio_pci_reset
#14 0x00005555559139a9 in qdev_reset_one
#15 0x0000555555916738 in qbus_walk_children
#16 0x0000555555913318 in qdev_walk_children
#17 0x0000555555916738 in qbus_walk_children
#18 0x00005555559168ca in qemu_devices_reset
#19 0x000055555581fcbb in pc_machine_reset
#20 0x00005555558a4d96 in qemu_system_reset
#21 0x000055555577157a in main_loop_should_exit
#22 0x000055555577157a in main_loop
#23 0x000055555577157a in main
The rationale is that the loop in block_job_detach_aio_context cannot
make any progress in pausing/completing the job, because bs->in_flight
is 0, so bdrv_drain doesn't process the block_job_defer_to_main_loop
BH. With this patch, it does.
Reported-by: Jeff Cody <[email protected]>
Signed-off-by: Fam Zheng <[email protected]>
Message-Id: <[email protected]>
Reviewed-by: Jeff Cody <[email protected]>
Tested-by: Jeff Cody <[email protected]>
Signed-off-by: Fam Zheng <[email protected]>
artyom-tarasenko
pushed a commit
that referenced
this pull request
May 15, 2017
ASAN detects an "unknown-crash" when running pxe-test:
/ppc64/pxe/spapr-vlan: =================================================================
==7143==ERROR: AddressSanitizer: unknown-crash on address 0x7f6dcd298d30 at pc 0x55e22218830d bp 0x7f6dcd2989e0 sp 0x7f6dcd2989d0
READ of size 128 at 0x7f6dcd298d30 thread T2
#0 0x55e22218830c in tftp_session_allocate /home/elmarco/src/qq/slirp/tftp.c:73
#1 0x55e22218a1f8 in tftp_handle_rrq /home/elmarco/src/qq/slirp/tftp.c:289
#2 0x55e22218b54c in tftp_input /home/elmarco/src/qq/slirp/tftp.c:446
#3 0x55e2221833fe in udp6_input /home/elmarco/src/qq/slirp/udp6.c:82
#4 0x55e222137b17 in ip6_input /home/elmarco/src/qq/slirp/ip6_input.c:67
Address 0x7f6dcd298d30 is located in stack of thread T2 at offset 96 in frame
#0 0x55e222182420 in udp6_input /home/elmarco/src/qq/slirp/udp6.c:13
This frame has 3 object(s):
[32, 48) '<unknown>'
[96, 124) 'lhost' <== Memory access at offset 96 partially overflows this variable
[160, 200) 'save_ip' <== Memory access at offset 96 partially underflows this variable
The sockaddr_storage pointer is the sockaddr_in6 lhost on the
stack. Copy only the source addr size.
Signed-off-by: Marc-André Lureau <[email protected]>
Reviewed-by: Thomas Huth <[email protected]>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Signed-off-by: Samuel Thibault <[email protected]>
artyom-tarasenko
pushed a commit
that referenced
this pull request
May 17, 2017
If trace backend is set to TRACE_NOP, trace_get_vcpu_event_count returns 0, cause bitmap_new call abort. The abort can be triggered as follows: $ ./configure --enable-trace-backend=nop --target-list=x86_64-softmmu $ gdb ./x86_64-softmmu/qemu-system-x86_64 -M q35,accel=kvm -m 1G (gdb) bt #0 0x00007ffff04e25f7 in raise () from /lib64/libc.so.6 #1 0x00007ffff04e3ce8 in abort () from /lib64/libc.so.6 #2 0x00005555559de905 in bitmap_new (nbits=<optimized out>) at /home/root/git/qemu2.git/include/qemu/bitmap.h:96 #3 cpu_common_initfn (obj=0x555556621d30) at qom/cpu.c:399 #4 0x0000555555a11869 in object_init_with_type (obj=0x555556621d30, ti=0x55555656bbb0) at qom/object.c:341 #5 0x0000555555a11869 in object_init_with_type (obj=0x555556621d30, ti=0x55555656bd30) at qom/object.c:341 #6 0x0000555555a11efc in object_initialize_with_type (data=data@entry=0x555556621d30, size=76560, type=type@entry=0x55555656bd30) at qom/object.c:376 #7 0x0000555555a12061 in object_new_with_type (type=0x55555656bd30) at qom/object.c:484 #8 0x0000555555a121c5 in object_new (typename=typename@entry=0x555556550340 "qemu64-x86_64-cpu") at qom/object.c:494 #9 0x00005555557f6e3d in pc_new_cpu (typename=typename@entry=0x555556550340 "qemu64-x86_64-cpu", apic_id=0, errp=errp@entry=0x5555565391b0 <error_fatal>) at /home/root/git/qemu2.git/hw/i386/pc.c:1101 #10 0x00005555557fa33e in pc_cpus_init (pcms=pcms@entry=0x5555565f9690) at /home/root/git/qemu2.git/hw/i386/pc.c:1184 #11 0x00005555557fe0f6 in pc_q35_init (machine=0x5555565f9690) at /home/root/git/qemu2.git/hw/i386/pc_q35.c:121 #12 0x000055555574fbad in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4562 Signed-off-by: Anthony Xu <[email protected]> Message-id: [email protected] Signed-off-by: Stefan Hajnoczi <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Minor changes to get qemu working on Solaris hosts