ata.device reports errors accessing an ata drive connected as slave, with an atapi drive as master

[Kalamatee]

• Describe the bug
  
  If a system has an atapi drive connected as master on a channel, with an ata device as slave - the ata device will have problems being accessed and fail.

• To Reproduce
  
  Steps to reproduce the behavior:
  Connect an atapi drive as primary master, and ata hard disk as primary slave.
  Install AROS...

• Expected behaviour
  
  AROS to Install

• Screenshots
  

• Architecture
  

• pc (native)

• CPU
  

• i386

• x86_64

• Version
  

• Additional context
  

[aGGre55or]

I faced this problem. I launched AROS64 as I wrote here under VMware and InstallAROS on virtual HDD.
Then I disabled boot-iso through "Connect at power" checkmark and successfully booted the installed AROS64 from the virtual HDD. After that, I wrote the files I needed to untitled.iso and tried to connect it. However, AROS64 is only loaded when virtual CD with iso is off. I've tried all the available master / slave options:

etc
I tried to boot from master HDD IDE 0:0 first and then connect CD slave IDE 0:1, but no autodetection happens.
I tried to boot from master HDD IDE 0:0 with connected SCSI 0:0 CD/DVD and AROS64 run, but autodetection doesn't happen either.
I tried to boot from master HDD IDE 0:0 with connected SATA 0:0 CD/DVD and AROS64 frozen with black screen.