cc3200v1p32.cmd

//*****************************************************************************
// cc3200v1p32.cmd
//
// CCS linker configuration file for cc3200 ES 1.32.
//
// Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ 
// 
// 
//  Redistribution and use in source and binary forms, with or without 
//  modification, are permitted provided that the following conditions 
//  are met:
//
//    Redistributions of source code must retain the above copyright 
//    notice, this list of conditions and the following disclaimer.
//
//    Redistributions in binary form must reproduce the above copyright
//    notice, this list of conditions and the following disclaimer in the 
//    documentation and/or other materials provided with the   
//    distribution.
//
//    Neither the name of Texas Instruments Incorporated nor the names of
//    its contributors may be used to endorse or promote products derived
//    from this software without specific prior written permission.
//
//  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
//  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
//  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
//  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
//  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
//  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
//  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
//  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
//  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
//  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
//  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************


--retain=g_pfnVectors

//*****************************************************************************
// The following command line options are set as part of the CCS project.  
// If you are building using the command line, or for some reason want to    
// define them here, you can uncomment and modify these lines as needed.     
// If you are using CCS for building, it is probably better to make any such 
// modifications in your CCS project and leave this file alone.              
//*****************************************************************************


//*****************************************************************************
// The starting address of the application.  Normally the interrupt vectors  
// must be located at the beginning of the application.                      
//*****************************************************************************
#define RAM_BASE 0x20004000

/* System memory map */

MEMORY
{
    /* Application uses internal RAM for program and data */
    SRAM_CODE (RWX) : origin = 0x20004000, length = 0x15000
    SRAM_DATA (RWX) : origin = 0x20019000, length = 0x17000
}

/* Section allocation in memory */

SECTIONS
{
    .intvecs:   > RAM_BASE
    .init_array : > SRAM_CODE
    .vtable :   > SRAM_CODE
    .text   :   > SRAM_CODE
    .const  :   > SRAM_CODE
    .cinit  :   > SRAM_CODE
    .pinit  :   > SRAM_CODE
    .data   :   > SRAM_DATA
    .bss    :   > SRAM_DATA
    .sysmem :   > SRAM_DATA
    .stack  :   > SRAM_DATA(HIGH)
}