Skip to content

Installation

Jump to bottom
Ali Güngör edited this page Jun 15, 2021 · 19 revisions

Getting the UERANSIM

Firstly, please make sure that you have the latest version of UERANSIM. You can download the source code from here or clone the repository:

cd ~
git clone https://github.com/aligungr/UERANSIM

Requirements

  1. Ubuntu 16.04 or later
  2. CMake 3.17 or later
  3. gcc 9.0.0 or later
  4. g++ 9.0.0 or later

Other Linux distributions are likely to work in general. But unfortunately Windows is not supported since Microsoft didn't implement SCTP protocol. You would need a virtual machine for a workaround.

NOTE: Windows Subsystem for Linux (WSL) cannot be used as a virtual machine as well. Also guest to host NAT based network configurations may not work on Windows because of the same reason. However VirtualBox with a bridged adapter setting should work fine on Windows.

Dependencies

Firstly it's better to update your apt repositories and upgrade the programs.

sudo apt update
sudo apt upgrade

Then here's the list of dependencies: (Built-in dependencies shipped with Ubuntu are not listed herein.)

sudo apt install make
sudo apt install g++
sudo apt install libsctp-dev lksctp-tools
sudo apt install iproute2
sudo snap install cmake --classic

NOTE: Don't install cmake with sudo apt-get install cmake, because it installs very old version of cmake by default. You can use sudo snap install cmake --classic or build cmake directly from sources.

NOTE: make, g++, cmake packages are only required for building UERANSIM. However libsctp-dev, lksctp-tools, iproute2 packages are also required at runtime.

Building

And here's command for building:

cd ~/UERANSIM
make

And that's it. After successfully compiling the project, output binaries will be copied to ~/UERANSIM/build folder. And you should see the following files:

  1. nr-gnb | Main executable for 5G gNB (RAN)
  2. nr-ue | Main executable for 5G UE
  3. nr-cli | CLI tool for 5G gNB and UE
  4. nr-binder | A tool for utilizing UE's internet connectivity.
  5. libdevbnd.so | A dynamic library for nr-binder

Run nr-gnb and nr-ue to start using UE and gNB. More details about them can be found in next steps.

nr-binder and libdevbnd.so are only required for binding UEs internet connectivity to an arbitrary application, and generally not used.

Next Steps

Configuration

Clone this wiki locally