panel-v2.md

Overview

Printing

• buttons.stl - print with 0.15mm profile, can be aligned with buttons-inset.stl for dual-color print
• panel-cover.stl - print with 0.2mm profile, can be aligned with panel-inset.stl for dual-color print
• panel-bottom.stl - print with 0.2mm profile

Shopping list

Item	Price
0.56'' TM1637 - 7 Segment display	~$1.69
Tactile switches - 12x12x7.3mm	~$1.83
KF2510 2.54mm - 10 Pin connector set	~$2.37
SUM	~$5,89
Weighted SUM	~$2.476

Assembly

• Solder wires to the tactile switches and insert button caps on them

  Tactile switches

  

• Insert them to top panel part and test if buttons clicks without any issue (cleanup holes if needed)

• Add superglue underneath each switch for stability

  Front case panel

  

• Insert 7-segment display to top panel part

• Wire up all the buttons and display with connector

• Add superglue to connector and fix it to panel back hole

• Fix top and bottom case parts with 3xM3-15mm + 3xM3-10mm screws

  Panel - screwed