case_motor-v2.md

Overview

Printing

• case frames:
  • motor-cover.stl print with 0.3mm profile
  • motor-lock.stl print with 0.3mm profile
  • motor-mount.stl print with 0.3mm profile, with supports
  • motor-sleeve.stl print with 0.2mm or 0.3mm profile, ideally with FLEX filament
  • shaft-template.stl optional, template for cutting shaft print with 0.2mm profile

Shopping list

Item	Price
DC motor - 12V	~$14,29
PSH08-02P / PFH08-02P	~$5,94
Shaft coupler 6mm-10mm	~$2.69
M4 - wood screw x 4	~$1.50
M3-6mm x 12	~$1.62
SUM	~$26,04
Weighted SUM	~$26,04

Assembly

• Cut the provided Skarsta handle to needed size, use the provided template for cutting (paint needs to be removed from the thicker part of shaft either with sandpaper or razor knife)
  Motor shaft

  

• Insert motor-sleeve on the motor and fix it with 6xM3-6mm screws
  Motor sleeve

  

• Wire up the PSH08-02P connector to the motor and fix it with superglue to the motor-cover
• Mount the motor-mount underneath the table with 6xM4 wood screws
  Motor mount

  

• Fix the shaft coupler to the shortened shaft and insert it to the table
• Insert the motor between the motor-mount and table all the way in, if needed adjust the shaft position
• Fix the motor to the shaft-coupler, if needed rotate the shaft
  Motor mounted

  

• Insert the motor-lock between the motor-mount and table all the way in and fix it with 2xM3-6mm screws
  Motor locked

  

• Cover the motor with motor-cover with 4xM3-6mm screws (move the cable to the side of the cover)
  Mounted