Please download the following files from the above mentioned one drive link:
-
final_run.mp4: Video showing the final run results of this project
-
model.h5: Keras saved model
-
SimRec_1.7z: Udacity Term 1 Simulator Driving Dataset 1
-
SimRec_2.7z: Udacity Term 1 Simulator Driving Dataset 2
Repository: https://github.com/YashBansod/udacity-self-driving-car/Behavioral-Cloning/
- Overview
- Data Set Summary and Exploration
- The NN Arcitecture
- Present Limitations and Possible Improvements
- Run Instructions
- Project Development Done Using
This Github repository was created for sharing the application implemented for the Fourth project of the Term 1 of Udacity's Self Driving Car Nanodegree program
The original project repository containing the template code used in this project is CarND-Behavioral-Cloning-P3
Datasets used in the project were :
- SimRec_1.7z
- SimRec_2.7z
Udacity provided sample driving dataset, however I did not use it : Udacity Sample Driving Dataset
Sample results:
A video demonstrating the final run of the car on the track is available in this GitHub Project: final_run.mp4
Trained model:
You can access the trained keras model used for autonomous control of the car from: model.h5
The model was able to drive the vehicle in the Udacity simulator at 30 mph (max possible speed in the simulator), while keeping the car at the lane centre.
The model was trained for 3 epochs:
Note: I am hosting the following:
- SimRec_1.7z
- SimRec_2.7z
- model.h5
on my cloud storage. It is configured to allow anyone with the link to download it. However, if you are unable to download the datasets from the above link, the access duration might have expired. Please feel free to contact me and I will update the access.
- Number of training examples = 71287
- Number of validation examples = 7921
- Image data shape = (160, 320, 3)
- Label shape = (1,) steering value
Feature Samples:
|
 Center Camera Image |
 Left Camera Image |
 Right Camera Image |
|---|---|---|
|
 Center Camera Image |
 Left Camera Image |
 Right Camera Image |
I recorded a total of 12 laps of driving data on the Map 1 of Udacity Simulator. 6 laps were recorded while driving anti-clockwise on the circuit and 6 laps were recorded while driving clockwise.
All the recordings and their corresponding annotations (as .csv file) were stored seperately (One .csv file per recording).
My initail plan was to use an LSTM at the end of the CNN Layers to encode sequential behavior in driving. However, due to limitation of the drive.py provided by Udacity, the closed loop implementation of a NN with LSTM would have been a bit difficult. Therefore, I forsaked that idea and worked with a standard CNN and Dense NN based Behavioral Cloning Architecture.
I implemented a NN with 5 CNN Layers (with Leaky Relu Activations), MaxPooling after 2nd and 4th CNN Layers, and 3 Fully Connected Layers (Final one being the logits layer).
The following table demonstrates the complete Neural Network Architecture:
| Layer (type) | Output Shape | Param # |
|---|---|---|
| lambda_1 (Lambda) | (None, 160, 320, 3) | 0 |
| cropping2d_1 (Cropping2D) | 0 | |
| conv2d_1 (Conv2D) | (None, 63, 318, 16) | 448 |
| leaky_re_lu_1 (LeakyReLU) | (None, 63, 318, 16) | 0 |
| conv2d_2 (Conv2D) | (None, 61, 316, 24) | 3480 |
| leaky_re_lu_2 (LeakyReLU) | (None, 61, 316, 24) | 0 |
| max_pooling2d_1 (MaxPooling2 | (None, 30, 158, 24) | 0 |
| conv2d_3 (Conv2D) | (None, 28, 156, 48) | 10416 |
| leaky_re_lu_3 (LeakyReLU) | (None, 28, 156, 48) | 0 |
| conv2d_4 (Conv2D) | (None, 26, 154, 64) | 27712 |
| leaky_re_lu_4 (LeakyReLU) | (None, 26, 154, 64) | 0 |
| max_pooling2d_2 (MaxPooling2 | (None, 13, 77, 64) | 0 |
| conv2d_5 (Conv2D) | (None, 11, 75, 128) | 73856 |
| leaky_re_lu_5 (LeakyReLU) | (None, 11, 75, 128) | 0 |
| flatten_1 (Flatten) | (None, 105600) | 0 |
| dense_1 (Dense) | (None, 128) | 13516928 |
| leaky_re_lu_6 (LeakyReLU) | (None, 128) | 0 |
| dense_2 (Dense) | (None, 64) | 8256 |
| leaky_re_lu_7 (LeakyReLU) | (None, 64) | 0 |
| dropout_1 (Dropout) | (None, 64) | 0 |
| dense_3 (Dense) | (None, 1) | 65 |
Total params: 13,641,161
Trainable params: 13,641,161
Non-trainable params: 0
- The number of parameters in the model could be reduced. Experiments to optimize model size and performance were not performed due to limited time.
- The input data could be augmented further to generalize the model better.
- Open the Terminal
- Clone this repository onto your local system.
- Enable a python interpreter in your environment (python version >=3.5) (It is recommended to use a python virtual interpreter).
- Install the requirements of this project from the requirements.txt by typing
pip install -r requirements.txt. - Change your present working directory to the inside of the cloned repository.
- Download the model.h5 into the directory.
- Run the Udacity Term 1 Simulator on your system. Udacity's Self-Driving Car Simulator
- Run the following command in your terminal (with the python virtual interpreter sourced):
python drive.py model.h5. - Enter the autonomous mode in the Udacity's Self-Driving Car Simulator.
Ubuntu 16.04
PyCharm 2018.2
Python 3.5