diff --git a/package/boot/uboot-envtools/files/qualcommax_ipq60xx b/package/boot/uboot-envtools/files/qualcommax_ipq60xx
index 33cb94f99d18f1..d9552eddeed3c6 100644
--- a/package/boot/uboot-envtools/files/qualcommax_ipq60xx
+++ b/package/boot/uboot-envtools/files/qualcommax_ipq60xx
@@ -14,6 +14,11 @@ case "$board" in
 	[ -n "$idx" ] && \
 		ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x10000" "0x10000"
 	;;
+linksys,mr7350)
+	idx="$(find_mtd_index u_env)"
+	[ -n "$idx" ] && \
+		ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x40000" "0x20000" "2"
+	;;
 netgear,wax214)
 	idx="$(find_mtd_index 0:appsblenv)"
 	[ -n "$idx" ] && \
diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile
index b6c1a34bde2a94..27a2b0cfef48fa 100644
--- a/package/firmware/ipq-wifi/Makefile
+++ b/package/firmware/ipq-wifi/Makefile
@@ -36,6 +36,7 @@ ALLWIFIBOARDS:= \
 	dynalink_dl-wrx36 \
 	edgecore_eap102 \
 	edimax_cax1800 \
+	linksys_mr7350 \
 	linksys_mx4200 \
 	linksys_mx5300 \
 	netgear_lbr20 \
@@ -154,6 +155,7 @@ $(eval $(call generate-ipq-wifi-package,compex_wpq873,Compex WPQ-873))
 $(eval $(call generate-ipq-wifi-package,dynalink_dl-wrx36,Dynalink DL-WRX36))
 $(eval $(call generate-ipq-wifi-package,edgecore_eap102,Edgecore EAP102))
 $(eval $(call generate-ipq-wifi-package,edimax_cax1800,Edimax CAX1800))
+$(eval $(call generate-ipq-wifi-package,linksys_mr7350,Linksys MR7350))
 $(eval $(call generate-ipq-wifi-package,linksys_mx4200,Linksys MX4200))
 $(eval $(call generate-ipq-wifi-package,linksys_mx5300,Linksys MX5300))
 $(eval $(call generate-ipq-wifi-package,netgear_lbr20,Netgear LBR20))
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6000-mr7350.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6000-mr7350.dts
new file mode 100644
index 00000000000000..fc20d14a0e2718
--- /dev/null
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6000-mr7350.dts
@@ -0,0 +1,370 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "ipq6018.dtsi"
+#include "ipq6018-cp-cpu.dtsi"
+#include "ipq6018-ess.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Linksys MR7350";
+	compatible = "linksys,mr7350", "qcom,ipq6000";
+
+	aliases {
+		serial0 = &blsp1_uart3;
+		led-boot = &led_system_blue;
+		led-running = &led_system_blue;
+		led-failsafe = &led_system_red;
+		led-upgrade = &led_system_green;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs-append = " root=/dev/ubiblock0_0";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset-button {
+			label = "reset";
+			gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps-button {
+			label = "wps";
+			gpios = <&tlmm 56 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+};
+
+&tlmm {
+	i2c3_pins: i2c3-pins {
+		pins = "gpio42", "gpio43";
+		function = "blsp2_i2c";
+		drive-strength = <8>;
+	};
+
+	mdio_pins: mdio-state {
+		mdc-pins {
+			pins = "gpio64";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mdio-pins {
+			pins = "gpio65";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	reg_usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&tlmm 61 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+};
+
+&blsp1_uart3 {
+	pinctrl-0 = <&serial_3_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&prng {
+	status = "okay";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+
+		partitions {
+			compatible = "qcom,smem-part";
+		};
+	};
+};
+
+&blsp1_i2c3 {
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	led-controller@62 {
+		compatible = "nxp,pca9633";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x62>;
+		nxp,hw-blink;
+
+		led_system_red: red@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led_system_green: green@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led_system_blue: blue@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+
+	ethernet-phy-package@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "qcom,qca8075-package";
+		reg = <0>;
+		qcom,package-mode = "psgmii";
+
+		qca8075_0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+
+			qcom,package-mode = "psgmii";
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_YELLOW>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+			};
+		};
+
+		qca8075_1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_YELLOW>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+			};
+		};
+
+		qca8075_2: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_YELLOW>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+			};
+		};
+
+		qca8075_3: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_YELLOW>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+			};
+		};
+
+		qca8075_4: ethernet-phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_WAN;
+					default-state = "keep";
+				};
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_YELLOW>;
+					function = LED_FUNCTION_WAN;
+					default-state = "keep";
+				};
+			};
+		};
+	};
+};
+
+&switch {
+	status = "okay";
+
+	switch_lan_bmp = <(ESS_PORT1|ESS_PORT2|ESS_PORT3|ESS_PORT4)>; /* lan port bitmap */
+	switch_wan_bmp = <(ESS_PORT5)>; /* wan port bitmap */
+	switch_mac_mode = <MAC_MODE_PSGMII>; /* mac mode for uniphy instance0*/
+
+	qcom,port_phyinfo {
+		port@1 {
+			port_id = <1>;
+			phy_address = <0>;
+		};
+		port@2 {
+			port_id = <2>;
+			phy_address = <1>;
+		};
+		port@3 {
+			port_id = <3>;
+			phy_address = <2>;
+		};
+		port@4 {
+			port_id = <4>;
+			phy_address = <3>;
+		};
+		port@5 {
+			port_id = <5>;
+			phy_address = <4>;
+		};
+	};
+};
+
+&edma {
+	status = "okay";
+};
+
+&dp1 {
+	status = "okay";
+	phy-handle = <&qca8075_0>;
+	label = "lan1";
+};
+
+&dp2 {
+	status = "okay";
+	phy-handle = <&qca8075_1>;
+	label = "lan2";
+};
+
+&dp3 {
+	status = "okay";
+	phy-handle = <&qca8075_2>;
+	label = "lan3";
+};
+
+&dp4 {
+	status = "okay";
+	phy-handle = <&qca8075_3>;
+	label = "lan4";
+};
+
+&dp5 {
+	status = "okay";
+	phy-handle = <&qca8075_4>;
+	label = "wan";
+};
+
+&wifi {
+	status = "okay";
+
+	qcom,ath11k-calibration-variant = "Linksys-MR7350";
+	qcom,ath11k-fw-memory-mode = <1>;
+};
+
+&ssphy_0 {
+	status = "okay";
+};
+
+&qusb_phy_0 {
+	status = "okay";
+};
+
+&usb3 {
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
diff --git a/target/linux/qualcommax/image/ipq60xx.mk b/target/linux/qualcommax/image/ipq60xx.mk
index a7851e3dc58671..cdd4ee0e6505ea 100644
--- a/target/linux/qualcommax/image/ipq60xx.mk
+++ b/target/linux/qualcommax/image/ipq60xx.mk
@@ -11,6 +11,22 @@ define Device/8devices_mango-dvk
 endef
 TARGET_DEVICES += 8devices_mango-dvk
 
+define Device/linksys_mr7350
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Linksys
+	DEVICE_MODEL := MR7350
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	KERNEL_SIZE := 8192k
+	IMAGE_SIZE := 75776k
+	NAND_SIZE := 256m
+	SOC := ipq6000
+	IMAGES += factory.bin
+	IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR7350
+	DEVICE_PACKAGES := kmod-leds-pca963x ipq-wifi-linksys_mr7350
+endef
+TARGET_DEVICES += linksys_mr7350
+
 define Device/netgear_wax214
        $(call Device/FitImage)
        $(call Device/UbiFit)
diff --git a/target/linux/qualcommax/ipq60xx/base-files/etc/board.d/01_leds b/target/linux/qualcommax/ipq60xx/base-files/etc/board.d/01_leds
new file mode 100644
index 00000000000000..16a41b5ea4ab5d
--- /dev/null
+++ b/target/linux/qualcommax/ipq60xx/base-files/etc/board.d/01_leds
@@ -0,0 +1,25 @@
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+linksys,mr7350)
+	ucidef_set_led_netdev "lan1_green" "LAN1-green" "90000.mdio-1:00:green:lan" "lan1" "tx rx link_10 link_100 link_1000"
+	ucidef_set_led_netdev "lan2_green" "LAN2-green" "90000.mdio-1:01:green:lan" "lan2" "tx rx link_10 link_100 link_1000"
+	ucidef_set_led_netdev "lan3_green" "LAN3-green" "90000.mdio-1:02:green:lan" "lan3" "tx rx link_10 link_100 link_1000"
+	ucidef_set_led_netdev "lan4_green" "LAN4-green" "90000.mdio-1:03:green:lan" "lan3" "tx rx link_10 link_100 link_1000"
+	ucidef_set_led_netdev "wan_green" "WAN-green" "90000.mdio-1:04:green:wan" "wan" "tx rx link_10 link_100 link_1000"
+	ucidef_set_led_netdev "lan1_amber" "LAN1-amber" "90000.mdio-1:00:yellow:lan" "lan1" "link"
+	ucidef_set_led_netdev "lan2_amber" "LAN2-amber" "90000.mdio-1:01:yellow:lan" "lan2" "link"
+	ucidef_set_led_netdev "lan3_amber" "LAN3-amber" "90000.mdio-1:02:yellow:lan" "lan3" "link"
+	ucidef_set_led_netdev "lan4_amber" "LAN4-amber" "90000.mdio-1:03:yellow:lan" "lan3" "link"
+	ucidef_set_led_netdev "wan_amber" "WAN-amber" "90000.mdio-1:04:yellow:wan" "wan" "link"
+	;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/qualcommax/ipq60xx/base-files/etc/board.d/02_network b/target/linux/qualcommax/ipq60xx/base-files/etc/board.d/02_network
index aaa2522c928315..4c0b941b74ed01 100644
--- a/target/linux/qualcommax/ipq60xx/base-files/etc/board.d/02_network
+++ b/target/linux/qualcommax/ipq60xx/base-files/etc/board.d/02_network
@@ -3,6 +3,7 @@
 # Copyright (c) 2011-2015 OpenWrt.org
 #
 
+. /lib/functions.sh
 . /lib/functions/uci-defaults.sh
 . /lib/functions/system.sh
 
@@ -14,6 +15,9 @@ ipq60xx_setup_interfaces()
 	8devices,mango-dvk)
 		ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
 		;;
+	linksys,mr7350)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
+		;;
 	netgear,wax214)
 		ucidef_set_interfaces_lan_wan "lan"
 		;;
@@ -23,9 +27,30 @@ ipq60xx_setup_interfaces()
 	esac
 }
 
+ipq60xx_setup_macs()
+{
+	local board="$1"
+	local lan_mac=""
+	local wan_mac=""
+	local label_mac=""
+
+	case $board in
+	linksys,mr7350)
+		label_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+		lan_mac=$label_mac
+		wan_mac=$label_mac
+		;;
+	esac
+
+	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+	[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
 board_config_update
 board=$(board_name)
 ipq60xx_setup_interfaces $board
+ipq60xx_setup_macs $board
 board_config_flush
 
 exit 0
diff --git a/target/linux/qualcommax/ipq60xx/base-files/etc/hotplug.d/firmware/11-ath11-caldata b/target/linux/qualcommax/ipq60xx/base-files/etc/hotplug.d/firmware/11-ath11-caldata
index 89d4c265abb517..db504d0b8f95e8 100644
--- a/target/linux/qualcommax/ipq60xx/base-files/etc/hotplug.d/firmware/11-ath11-caldata
+++ b/target/linux/qualcommax/ipq60xx/base-files/etc/hotplug.d/firmware/11-ath11-caldata
@@ -12,6 +12,7 @@ case "$FIRMWARE" in
 	8devices,mango-dvk)
 		caldata_extract "0:ART" 0x1000 0x20000
 		;;
+	linksys,mr7350|\
 	netgear,wax214)
 		caldata_extract "0:art" 0x1000 0x10000
 		;;
diff --git a/target/linux/qualcommax/ipq60xx/base-files/etc/hotplug.d/firmware/11_fix_wifi_mac b/target/linux/qualcommax/ipq60xx/base-files/etc/hotplug.d/firmware/11_fix_wifi_mac
new file mode 100644
index 00000000000000..a67cc7262b3cac
--- /dev/null
+++ b/target/linux/qualcommax/ipq60xx/base-files/etc/hotplug.d/firmware/11_fix_wifi_mac
@@ -0,0 +1,18 @@
+[ "$ACTION" == "add" ] || exit 0
+
+PHYNBR=${DEVPATH##*/phy}
+
+[ -n $PHYNBR ] || exit 0
+
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+board=$(board_name)
+
+case "$board" in
+	linksys,mr7350)
+		addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+		[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
+		[ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
+		;;
+esac
diff --git a/target/linux/qualcommax/ipq60xx/base-files/etc/init.d/bootcount b/target/linux/qualcommax/ipq60xx/base-files/etc/init.d/bootcount
new file mode 100644
index 00000000000000..c94d3dfe7d1bf2
--- /dev/null
+++ b/target/linux/qualcommax/ipq60xx/base-files/etc/init.d/bootcount
@@ -0,0 +1,11 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+boot() {
+	case $(board_name) in
+	linksys,mr7350)
+		mtd resetbc s_env || true
+		;;
+	esac
+}
diff --git a/target/linux/qualcommax/ipq60xx/base-files/lib/upgrade/platform.sh b/target/linux/qualcommax/ipq60xx/base-files/lib/upgrade/platform.sh
index 4008cb0224193c..da0c3fce580a08 100644
--- a/target/linux/qualcommax/ipq60xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/qualcommax/ipq60xx/base-files/lib/upgrade/platform.sh
@@ -10,6 +10,20 @@ platform_check_image() {
 
 platform_do_upgrade() {
 	case "$(board_name)" in
+	linksys,mr7350)
+	boot_part="$(fw_printenv -n boot_part)"
+		if [ "$boot_part" -eq "1" ]; then
+			fw_setenv boot_part 2
+			CI_KERNPART="alt_kernel"
+			CI_UBIPART="alt_rootfs"
+		else
+			fw_setenv boot_part 1
+			CI_UBIPART="rootfs"
+		fi
+		fw_setenv boot_part_ready 3
+		fw_setenv auto_recovery yes
+		nand_do_upgrade "$1"
+		;;
 	netgear,wax214)
 		nand_do_upgrade "$1"
 		;;