WemxPRO-Installer-live.sh

clear
COLOR_BLUE='\033[0;34m'
COLOR_YELLOW='\033[1;33m'
COLOR_ORANGE='\033[0;33m'
COLOR_GREEN='\033[0;32m'
COLOR_RED='\033[0;31m'
COLOR_NC='\033[0m'
success() {
  echo ""
  echo -e "* ${COLOR_GREEN}SUCCESS${COLOR_NC}: $1" 1>&2
  echo ""
}
error() {
  echo ""
  echo -e "* ${COLOR_RED}ERROR${COLOR_NC}: $1" 1>&2
  echo ""
}
warning() {
  echo ""
  echo -e "* ${COLOR_YELLOW}WARNING${COLOR_NC}: $1" 1>&2
  echo ""
}
notice() {
  echo ""
  echo -e "* ${COLOR_BLUE}NOTICE${COLOR_NC}: $1" 1>&2
  echo ""
}
full_install(){
#Installing Composer
curl -sS https://getcomposer.org/installer | sudo php -- --install-dir=/usr/local/bin --filename=composer
#Make Directory
mkdir -p /var/www/pterodactyl
cd /var/www/pterodactyl
#Download Files
curl -Lo panel.tar.gz https://github.com/pterodactyl/panel/releases/latest/download/panel.tar.gz
tar -xzvf panel.tar.gz
chmod -R 755 storage/* bootstrap/cache/
#Installation
clear
sleep 2s
echo "Please note that you can skip the Database Setup if you are just purely reinstalling pterodactyl files...:"
read -p "Do you wish to continue to database installation? [Y/n]: " yn
while true; do
case $yn in
	[yY] ) 
		echo Entering Database Setup for Pterodactyl...;
		adminuser_create_db
		break;;
	[nN] ) 
		echo Skipping Database Setup for Pterodactyl, Assuming you already have a database for pterodactyl...;
		full_install_continue
		break;;
	* ) echo Invalid Response;;
esac
done
}
# -- Database Creation -- #
adminuser_create_db(){
clear
echo "Creating a Super Admin Account for MariaDB..."
sleep 3s
echo " "
read -p "Enter the desired username for the 'super admin' account (e.g., superadmin): " SUPERADMIN_USER
echo " "
read -sp "Enter a password for the '$SUPERADMIN_USER' user: " SUPERADMIN_PASS
echo "" # for new line after password input
		# Create 'superadmin' user with all privileges
		# Using sudo for MariaDB 10.4 and above
		# Quoting and escaping SQL data
sudo mariadb -u root <<EOF
CREATE USER '$SUPERADMIN_USER'@'%' IDENTIFIED BY '$(echo $SUPERADMIN_PASS | sed 's/[\\"$]/\\&/g')';
GRANT ALL PRIVILEGES ON *.* TO '$SUPERADMIN_USER'@'%' WITH GRANT OPTION;
FLUSH PRIVILEGES;
EOF

if [ $? -eq 0 ]; then
    success "Successfully created '$SUPERADMIN_USER' account. Use this account for administrative tasks instead of 'root'."
	notice "Unsetting User and Password from memory for security reasons..."
	unset SUPERADMIN_USER SUPERADMIN_PASS
	sleep 2s
    full_install_db
else
    error "There was an error creating the '$SUPERADMIN_USER' account. Please check and try again."
    # Print the last few lines of the MariaDB error log for troubleshooting
    sudo tail -n 10 /var/log/mysql/error.log
	notice "Unsetting User and Password from memory for security reasons..."
	unset SUPERADMIN_USER SUPERADMIN_PASS
	sleep 5s
	sudo service start mysql
	notice "Attempting to start MySQL Service if offline during the update proccess..."
	warning "If you continue to get this loop, something is wrong with your DB Setup, please reinstall your DB/MySQL..."
    adminuser_create_db
fi
}
db_node_install(){
sleep 3s
clear
notice "Attempting to create nekouser account..."
notice "Since you made a 'SUPER ADMIN ACCOUNT' please use that instead of root!"
sleep 2s
echo "TIP: for localhost just use localhost or 127.0.0.1, this is for users who have cPanel or weird complex setups."
read -p "Enter the hostname or IP address of the MySQL server (Exmaple: 127.0.0.1 or 5.55.555.5): " DB_HOST
echo " "
read -p "Enter the MySQL root or super_admin username: " ROOT_USER
echo " "
read -sp "Enter the MySQL root or super_admin password: " ROOT_PASSWORD
echo " "
read -sp "Enter the new password for new user of "dbclient": " USERDB_NEW_PASSWORD
echo " "
warning "If Your using root and Root's Password is BLANK then it will ask for a password, just hit enter if blank."
sleep 3s
mysql -h$DB_HOST -u$ROOT_USER -p$ROOT_PASSWORD <<EOF
CREATE USER 'dbclient'@'%' IDENTIFIED BY '$USERDB_NEW_PASSWORD';
GRANT ALL PRIVILEGES ON *.* TO 'dbclient'@'%' WITH GRANT OPTION;
FLUSH PRIVILEGES;
EOF
notice "If your seeing this without any errors from mysql, your account was created successfully"
sleep 3s
notice "Clearing the passwords variables from memory..."
unset ROOT_PASSWORD USERDB_NEW_PASSWORD
success "Unsetting for security reasons.."
sleep 3s
success "Done & Cleared!"
sleep 2s
clear
notice "We have success/attempted to created accounts of (panel and dbclient)"
echo "Continuing With Pterodactyl Install..."
sleep 5s
full_install_continue
}
full_install_db(){
sleep 3s
clear
notice "Attempting to create panel database..."
notice "Since you made a 'SUPER ADMIN ACCOUNT' please use that instead of root!"
sleep 2s
echo "TIP: for localhost just use localhost or 127.0.0.1, this is for users who have cPanel or weird complex setups."
read -p "Enter the hostname or IP address of the MySQL server (Exmaple: 127.0.0.1 or 5.55.555.5):" DB_HOST
echo " "
read -p "Enter the MySQL root or super_admin username: " ROOT_USER
echo " "
read -sp "Enter the MySQL root or super_admin password: " ROOT_PASSWORD
echo " "
read -sp "Enter the new password for new user of "panel": " PANEL_NEW_PASSWORD
echo " "
warning "If Your using root and Root's Password is BLANK then it will ask for a password, just hit enter if blank."
echo " "
sleep 3s
mysql -h$DB_HOST -u$ROOT_USER -p$ROOT_PASSWORD <<EOF
CREATE USER 'panel'@'%' IDENTIFIED BY '$PANEL_NEW_PASSWORD';
CREATE DATABASE panel;
GRANT ALL PRIVILEGES ON *.* TO 'panel'@'%' WITH GRANT OPTION;
FLUSH PRIVILEGES;
EOF
notice "If your seeing this without any errors from mysql, your account was created successfully"
sleep 3s
notice "Clearing the passwords variables from memory..."
unset ROOT_PASSWORD PANEL_NEW_PASSWORD
success "Unsetting for security reasons.."
sleep 3s
success "Done & Cleared!"
sleep 2s
clear
while true; do
notice "Host DB Account seperates from your pterodactylpanel Account and better security wise."
read -p "Do you wish to create a HOST DB [dbclient] for your node(s)? (Y/n)" yn
    case $yn in
        [yY] )
            echo "Yes... Will make user name dbclient."
			db_node_install
            break;;
        [nN] )
			notice "We have success/attempted to created accounts of (panel)"
            echo "Continuing With Pterodactyl Install..."
			sleep 5s
			full_install_continue
            break;;
        *)
            echo "Invalid Response"
			noice "Do you wish to create a HOST DB for your node(s)?"
			read -p "We will make a dbclient user account for your host nodes. [Y/N] " yn;;
    esac
done
}
# -- Continue -- #
full_install_continue(){
clear
cd /var/www/pterodactyl
date=$(date "+%Y%m%d_%H%M%S")
# Fail Safe, Just incase you ran this twice for whatever reason.
cp .env .env.old_$date
cp .env.example .env
notice "We have copied your .env file if existed to .env.old_X, no worries of losing your encryption keys!"
notice "if you get '.env': No such file or directory, safely ignore since there wasn't one to copy."
sleep 3s
COMPOSER_ALLOW_SUPERUSER=1 composer install --no-dev --optimize-autoloader
# Environment Configuration
clear
warning "Only run the key generation if you are installing pterodactyl for the first time!!"
notice "IF your installing the first time, you will enter YES otherwise, No"
warning "This can cause MAC Invalid Issue if your running it a second time!!"
read -p "Do you want to generate a new key? (yes/no): " answer
case $answer in
    [Yy]* )
        warning "RUNNING THE KEY GENERATE!!"
        php artisan key:generate --force;;
    [Nn]* )
        echo "Skipping key generation.";;
    * ) echo "Please answer yes or no.";;
esac
echo "Running.. php artisan p:environment:setup"
sleep 5s
php artisan p:environment:setup
echo "Running.. php artisan p:environment:database"
sleep 5s
php artisan p:environment:database
echo "Running.. php artisan p:environment:mail"
notice  "To use PHP's internal mail sending (not recommended), select "mail". To use a custom SMTP server, select "smtp"."
sleep 5s
php artisan p:environment:mail
sleep 3s
# Database Setup
php artisan migrate --seed --force
# Add The First User
php artisan p:user:make
# Set Permissions
chown -R www-data:www-data /var/www/pterodactyl/*
echo "Stopping Web Servers if any..."
sudo systemctl stop apache2
sudo systemctl stop nginx
clear
# Queue Listeners
# Check if the cron job already exists in root's crontab
cron_exists=$(sudo crontab -l -u root | grep -q 'php /var/www/pterodactyl/artisan schedule:run'; echo $?)

# If it doesn't exist, add it
if [ "$cron_exists" -ne 0 ]; then
    # Add the cron job to the root user's crontab
    (sudo crontab -l -u root 2>/dev/null; echo "* * * * * php /var/www/pterodactyl/artisan schedule:run >> /dev/null 2>&1") | sudo crontab -u root -
    notice "Cron job added to root's crontab!"
else
    warning "Cron job already exists in root's crontab!"
fi
# Adding Service of Pterodactyl
sleep 2s
cat <<EOL > /etc/systemd/system/pteroq.service
[Unit]
Description=Pterodactyl Queue Worker
After=redis-server.service

[Service]
User=www-data
Group=www-data
Restart=always
ExecStart=/usr/bin/php /var/www/pterodactyl/artisan queue:work --queue=high,standard,low --sleep=3 --tries=3
StartLimitInterval=180
StartLimitBurst=30
RestartSec=5s

[Install]
WantedBy=multi-user.target
EOL
#Enabling Redis on System
sudo systemctl enable --now redis-server
#Enabling Pterodactyl on System
sudo systemctl enable --now pteroq.service
echo " "
echo " "
echo " "
sleep 3s
clear
read -p "Do you wish to continue to SSL Installation + Webserver? [RECOMMENDED](Y/n) " yn
while true; do
    # Prompt the user for input and read it into the yn variable
    read -p "Do you want to setup webserver + ssl for Pterodactyl? (y/n): " yn

    case $yn in
        [yY] ) 
            echo "Will make webserver + ssl for Pterodactyl...";
            sleep 3
            full_certbot_ssl
            break;;
        [nN] ) 
            echo "Skipping webserver + ssl for Pterodactyl...";
            sleep 3
            full_install_continue
            break;;
        * ) echo "Invalid Response";;
    esac
done
}
full_certbot_ssl(){
warning "We will be using and running SSL Version of Installation otherwise you will need to cancel and manually make your own WEBSERVER"
warning "Continuing in 15 Seconds... This is your only warning."
sleep 15s
notice "Installing Certbot for SSL..."
sudo apt install -y certbot
clear
echo "Enter your DOMAIN that will be challenged for certbot."
read -p "Example, NekoHosting's Pterodactyl Domain is beta.nekohosting.gg | DOMAIN/URL: " FULL_DOMAIN_URL
sudo systemctl stop nginx
sudo systemctl stop apache2 #I don't know but sometimes apache2 is installed for no reason.
sudo service apache2 stop
sudo service nginx stop
sudo netstat -tulnep | grep -E ':80|:443' | awk '{print $9}' | cut -d'/' -f1 | xargs sudo kill -9
sudo netstat -tulnep | grep -E ':80|:443' | awk '{print $9}' | cut -d'/' -f1 | xargs sudo kill -9
sudo netstat -tulnep | grep -E ':80|:443' | awk '{print $9}' | cut -d'/' -f1 | xargs sudo kill -9
echo "Choose a command to run:"
echo "============================================================================"
echo "1. DNS challenge"
echo "2. HTTP challenge Standalone (Recommend)"
echo "3. Cancel Script and exit."
echo "============================================================================"
select opt in "1" "2" "3"
do
    case $opt in
        "1")
			sudo systemctl stop nginx
			sudo systemctl stop apache2 #I don't know but sometimes apache2 is installed for no reason.
			sudo service apache2 stop
			sudo service nginx stop
			sudo netstat -tulnep | grep -E ':80|:443' | awk '{print $9}' | cut -d'/' -f1 | xargs sudo kill -9
			sudo netstat -tulnep | grep -E ':80|:443' | awk '{print $9}' | cut -d'/' -f1 | xargs sudo kill -9
            sudo certbot -d $FULL_DOMAIN_URL --manual --preferred-challenges dns certonly
            break;;
        "2")
		    sudo systemctl stop nginx
			sudo systemctl stop apache2 #I don't know but sometimes apache2 is installed for no reason.
			sudo service apache2 stop
			sudo service nginx stop
			sudo netstat -tulnep | grep -E ':80|:443' | awk '{print $9}' | cut -d'/' -f1 | xargs sudo kill -9
			sudo netstat -tulnep | grep -E ':80|:443' | awk '{print $9}' | cut -d'/' -f1 | xargs sudo kill -9
            sudo certbot certonly --standalone -d $FULL_DOMAIN_URL
            break;;		
        "3")
            break;;
        *) echo "Invalid option $REPLY";;
    esac
done

notice "If any issues, recommend looking at docs for certbot: https://pterodactyl.io/tutorials/creating_ssl_certificates.html#auto-renewal"
sleep 5s
notice "Clearing the variables from memory..."
success "Unsetting for security reasons.."
success "Done & Cleared!"
full_web_server
}
full_web_server(){
rm /etc/nginx/sites-enabled/default
AVAILABLE_CONFIG="/etc/nginx/sites-available/pterodactyl.conf"
ENABLED_CONFIG="/etc/nginx/sites-enabled/pterodactyl.conf"
# Write the configuration to the file
cat > "$AVAILABLE_CONFIG" <<'EOF'
server_tokens off;

server {
    listen 80;
    server_name <domain>;
    return 301 https://$server_name$request_uri;
}

server {
    listen 443 ssl http2;
    server_name <domain>;

    root /var/www/pterodactyl/public;
    index index.php;

    access_log /var/log/nginx/pterodactyl.app-access.log;
    error_log  /var/log/nginx/pterodactyl.app-error.log error;

    # allow larger file uploads and longer script runtimes
    client_max_body_size 100m;
    client_body_timeout 120s;

    sendfile off;

    # SSL Configuration - Replace the example <domain> with your domain
    ssl_certificate /etc/letsencrypt/live/<domain>/fullchain.pem;
    ssl_certificate_key /etc/letsencrypt/live/<domain>/privkey.pem;
    ssl_session_cache shared:SSL:10m;
    ssl_protocols TLSv1.2 TLSv1.3;
    ssl_ciphers "ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384";
    ssl_prefer_server_ciphers on;

    # See https://hstspreload.org/ before uncommenting the line below.
    # add_header Strict-Transport-Security "max-age=15768000; preload;";
    add_header X-Content-Type-Options nosniff;
    add_header X-XSS-Protection "1; mode=block";
    add_header X-Robots-Tag "index, follow";
    add_header Content-Security-Policy "frame-ancestors 'self'";
    add_header X-Frame-Options DENY;
    add_header Referrer-Policy same-origin;

    location / {
        try_files $uri $uri/ /index.php?$query_string;
    }

    location ~ \.php$ {
        fastcgi_split_path_info ^(.+\.php)(/.+)$;
        fastcgi_pass unix:/run/php/php8.1-fpm.sock;
        fastcgi_index index.php;
        include fastcgi_params;
        fastcgi_param PHP_VALUE "upload_max_filesize = 100M \n post_max_size=100M";
        fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
        fastcgi_param HTTP_PROXY "";
        fastcgi_intercept_errors off;
        fastcgi_buffer_size 16k;
        fastcgi_buffers 4 16k;
        fastcgi_connect_timeout 300;
        fastcgi_send_timeout 300;
        fastcgi_read_timeout 300;
        include /etc/nginx/fastcgi_params;
    }

    location ~ /\.ht {
        deny all;
    }
}
EOF

# Replace the placeholder with the actual domain
sed -i "s/<domain>/$FULL_DOMAIN_URL/g" "$AVAILABLE_CONFIG"
# If you want to continue with enabling the configuration for Nginx:
if [ ! -e "$ENABLED_CONFIG" ]; then
    sudo ln -s "$AVAILABLE_CONFIG" "$ENABLED_CONFIG"
else
    echo "Symbolic link $ENABLED_CONFIG already exists. Skipping link creation."
fi
# Test and reload nginx config
if sudo nginx -t; then
    sudo systemctl reload nginx
else
    echo "Nginx configuration test failed. Please review your settings."
fi
notice "Selecting No will go to WEMX Installation!"
read -p "Do you wish to continue to Wings Installation (Y/n) " yn
while true; do
case $yn in
	[yY] ) 
		echo Will continue to install Wings for Pterodactyl...;
		sleep 3
		echo " "
		full_wings
		break;;
	[nN] ) 
		echo Skipping Wings for Pterodactyl... Moving to Wemx Install...;
		sleep 3
		echo " "
		wemx_install
		break;;
	* ) echo Invalid Response;;
esac
done
}
full_wings(){
# Check for manufacturer or virtualization type
MANUFACTURER=$(sudo dmidecode -s system-manufacturer)
VIRTUALIZATION=$(sudo systemd-detect-virt)
# Check if OpenVZ, LXC or Virtuozzo is being used
if [[ $VIRTUALIZATION == "openvz" ]] || [[ $VIRTUALIZATION == "lxc" ]] || [[ $MANUFACTURER == *'Virtuozzo'* ]]; then
    clear
	warning "Your provider uses a virtualization that may not be supported."
	sleep 3
	error "Please refer to the https://pterodactyl.io/wings/1.0/installing.html since your setup does not support wings at this time."
	sleep 2
	exit 1
elif [[ $VIRTUALIZATION == "none" ]]; then
    success "You are running on dedicated hardware without any virtualization."
	sleep 3
else
    notice "Your system is not on a dedicated hardware/system. However we couldn't find (OPENVZ/LXC/Virtuozzo) running so that good enough."
	sleep 3
fi
curl -sSL https://get.docker.com/ | CHANNEL=stable bash
systemctl enable --now docker
if docker info 2>&1 | grep -q "WARNING: No swap limit support"; then
    echo "Warning detected: Docker has no swap limit support."
	echo "The Script will not modify the GRUB..."
	sleep 5s
else
    echo "Docker seems to have swap limit support. Modifying the GRUB..."
	sleep 2s
	notice "CREATING A BACKUP OF GRUB, just for security/safety reasons..."
	# Backup the current GRUB configuration
	sudo cp /etc/default/grub /etc/default/grub.backup
	# Check if the line exists and modify/add it accordingly
	if grep -q '^GRUB_CMDLINE_LINUX_DEFAULT=' /etc/default/grub; then
    # Modify the existing line
    sed -i 's/^GRUB_CMDLINE_LINUX_DEFAULT=".*"/GRUB_CMDLINE_LINUX_DEFAULT="swapaccount=1"/' /etc/default/grub
	else
    # Add the line if it doesn't exist
    echo 'GRUB_CMDLINE_LINUX_DEFAULT="swapaccount=1"' >> /etc/default/grub
	# Update GRUB
	sudo update-grub
	# Provide feedback to the user
	echo "GRUB modified successfully. Please reboot the system for changes to take effect."
fi
fi
# Installing Pterodactyl Wings
notice "Installing Pterodactyl Wings..."
mkdir -p /etc/pterodactyl
# Determine architecture and download the appropriate version of wings
ARCH=$([[ "$(uname -m)" == "x86_64" ]] && echo "amd64" || echo "arm64")
curl -L -o /usr/local/bin/wings "https://github.com/pterodactyl/wings/releases/latest/download/wings_linux_$ARCH"
chmod u+x /usr/local/bin/wings
# Warning for OVH/SYS Servers
if df -h | grep -q '/home'; then
    warning "It seems you might be using an OVH/SYS server. The main drive space might be allocated to /home. Consider using /home/daemon-data for server data when setting up the node."
fi
mkdir /etc/pterodactyl/
touch /etc/pterodactyl/config.yml
notice "Making a Daemon Server File Directory..."
#Legacy Installer
#echo "Choose a command to run:"
#echo "============================================================================"
#echo "1. Default Location"
#echo "2. Custom Location"
#echo "3. Default Location (OVH)"
#echo "4. Custom Location (OVH)"
#echo "5. Cancel Script and Exit."
#echo "============================================================================"
echo "Making a Daemon Server File Directory"
echo "If you use OVH you should check your partition scheme. You may need to use /home/daemon-data to have enough space."
select opt in "Default Location" "Custom Location" "Default Location (OVH)" "Custom Location (OVH)" "Cancel Script and Exit."; do
    case $opt in
        "Default Location")
			cd /
            mkdir -p /var/lib/pterodactyl/volumes
			notice "Configuration File you will need to add manually from panel itself." 
			sleep 10
			wings_finalize
            break;;
        "Custom Location")
			read -p "Enter Custom Directory Name: " DIR_CUSTOMKEY
            cd /
			mkdir -p /$DIR_CUSTOMKEY/volumes
			notice "Configuration File you will need to add manually from panel itself." 
			sleep 10
			wings_finalize
            break;;
        "Default Location (OVH)")
			cd /
            mkdir -p /home/daemon-data/var/lib/pterodactyl/volumes
			wings_finalize
			notice "Configuration File you will need to add manually from panel itself." 
			sleep 10
            break;;
        "Custom Location (OVH)")
			read -p "Enter Custom Directory Name: " DIR_CUSTOMKEY
            cd /home/daemon-data
			mkdir -p /home/daemon-data/$DIR_CUSTOMKEY/volumes
			notice "Configuration File you will need to add manually from panel itself." 
			sleep 10
			wings_finalize
            break;;	
        "Cancel Script and Exit.")
            echo "Exiting..."
            exit 0;;
        *) echo "Invalid option $REPLY";;
    esac
done
}
wings_finalize(){
clear
# Write the service configuration to the correct location
cat <<EOL > /etc/systemd/system/wings.service
[Unit]
Description=Pterodactyl Wings Daemon
After=docker.service
Requires=docker.service
PartOf=docker.service

[Service]
User=root
WorkingDirectory=/etc/pterodactyl
LimitNOFILE=4096
PIDFile=/var/run/wings/daemon.pid
ExecStart=/usr/local/bin/wings
Restart=on-failure
StartLimitInterval=180
StartLimitBurst=30
RestartSec=5s

[Install]
WantedBy=multi-user.target
EOL

# Reload systemd, enable and start the wings service
systemctl enable --now wings
systemctl daemon-reload
systemctl enable wings.service
systemctl start wings.service

# Check the status
if systemctl is-active --quiet wings.service; then
    success "Pterodactyl Wings service is active and running."
	sleep 3s
	wemx_install
else
    error "There was an issue starting the Pterodactyl Wings service. Please check the service status manually when installer is completed.."
	sleep 3s
	wemx_install
fi
}
wemx_install(){
    clear
    echo "============================================================================"
    warning "If there were any issues during the Pterodactyl + Wings installation, please cancel the script!"
    warning "If there were no issues during the Pterodactyl + Wings installation, you may continue the script!"
    echo "============================================================================"

    echo "Hint: No is to continue the installer"
    read -p "Were there any issues during the install? (Y/n): " yn

    case $yn in
        [nN] ) echo "Continuing...";;
        [yY] ) echo "User Selected Yes... Attempting to Exit..."; exit;;
        * ) echo "Invalid Response"; exit;;
    esac
    notice "Wemx Installer will be run in this setup... We will need the key for it to work."
    read -p "Enter the License Key for WEMX: " WEMX_KEY
notice "Installing Composer..."
curl -sS https://getcomposer.org/installer | sudo php -- --install-dir=/usr/local/bin --filename=composer
cd /var/www
sudo rm -r wemx # This is here due to laravel complain if running again.
notice "Making Directory via laravel..."
COMPOSER_ALLOW_SUPERUSER=1 composer create-project laravel/laravel wemx
cd /var/www/wemx
notice "Downloading the WemX Installer using composer..."
COMPOSER_ALLOW_SUPERUSER=1 composer require wemx/installer dev-web
warning "You automatically agree to WEMX's EULA."
php artisan wemx:install $WEMX_KEY
# Fail Safe, Just incase you ran this twice for whatever reason.
cp .env .env.old_$date
cp .env.example .env
notice "We have copied your .env file if existed to .env.old_X, no worries of losing your encryption keys!"
notice "if you get '.env': No such file or directory, safely ignore since there wasn't one to copy."
sleep 5s
clear
#For Whatever reason, Wemx own installer doesn't do This
COMPOSER_ALLOW_SUPERUSER=1 composer require wemx/installer dev-web
chmod -R 755 storage/* bootstrap/cache
COMPOSER_ALLOW_SUPERUSER=1 composer update
COMPOSER_ALLOW_SUPERUSER=1 composer install --optimize-autoloader
php artisan module:enable
php artisan view:clear && php artisan config:clear
php artisan migrate --seed --force
php artisan module:publish
chown -R www-data:www-data /var/www/wemx/*
COMPOSER_ALLOW_SUPERUSER=1 composer install --optimize-autoloader
notice "Clearing the WEMX KEY variable from memory..."
warning "You automatically agree to WEMX's EULA."
php artisan wemx:install $WEMX_KEY
# Fail Safe, Just incase you ran this twice for whatever reason.
cp .env .env.old_$date
cp .env.example .env
notice "We have copied your .env file if existed to .env.old_X, no worries of losing your encryption keys!"
notice "if you get '.env': No such file or directory, safely ignore since there wasn't one to copy."
unset WEMX_KEY
success "Unsetting for security reasons.."
success "Done & Cleared!"
echo "============================================================================"
warning "If there was any issues during the pre-install-wemx please cancel the script!"
warning "If there was no issues during the pre-install-wemx you may contine the script!"
echo "============================================================================"
    while true; do
        read -p "Do you wish to continue to database installation for wemx? (Y/n): " yn

        case $yn in
            [yY] ) 
                echo "Continuing..."
                while true; do
                    clear
                    notice "You already made one via pterodactyl db setup if you skipped it then make one. (Recommend CreateOne)"
                    read -p "Do you already have a super admin account that's not root? (UseExisting/CreateOne): " admin_choice

                    case $admin_choice in
                        UseExisting)
                            echo "Proceeding with the assumption that a Super Admin Account already exists..."
                            full_install_db_wemx
                            break 2;; # Break out of both loops
                        CreateOne)
                            echo "Proceeding to create a new Super Admin Account..."
                            adminuser_create_db_wemx
                            break 2;; # Break out of both loops
                        *)
                            echo "Invalid Response"
                            # The loop will ask again for the admin_choice
                            ;;
                    esac
                done
                ;;
            [nN] ) 
                echo "Attempting to Exit..."
                exit;;
            * ) 
                echo "Invalid Response"
                # The loop will ask again for yn
                ;;
        esac
    done
}
adminuser_create_db_wemx(){
clear
echo "Creating a Super Admin Account for MariaDB..."
sleep 3s
echo " "
read -p "Enter the desired username for the 'super admin' account (e.g., superadmin): " SUPERADMIN_USER
echo " "
read -sp "Enter a password for the '$SUPERADMIN_USER' user: " SUPERADMIN_PASS
echo "" # for new line after password input
		# Create 'superadmin' user with all privileges
		# Using sudo for MariaDB 10.4 and above
		# Quoting and escaping SQL data
sudo mariadb -u root <<EOF
CREATE USER '$SUPERADMIN_USER'@'%' IDENTIFIED BY '$(echo $SUPERADMIN_PASS | sed 's/[\\"$]/\\&/g')';
GRANT ALL PRIVILEGES ON *.* TO '$SUPERADMIN_USER'@'%' WITH GRANT OPTION;
FLUSH PRIVILEGES;
EOF

if [ $? -eq 0 ]; then
    success "Successfully created '$SUPERADMIN_USER' account. Use this account for administrative tasks instead of 'root'."
	notice "Unsetting User and Password from memory for security reasons..."
	unset SUPERADMIN_USER SUPERADMIN_PASS
	sleep 2s
    full_install_db_wemx
else
    error "There was an error creating the '$SUPERADMIN_USER' account. Please check and try again."
    # Print the last few lines of the MariaDB error log for troubleshooting
    sudo tail -n 10 /var/log/mysql/error.log
	notice "Unsetting User and Password from memory for security reasons..."
	unset SUPERADMIN_USER SUPERADMIN_PASS
	sleep 5s
	sudo service start mysql
	notice "Attempting to start MySQL Service if offline during the update proccess..."
	warning "If you continue to get this loop, something is wrong with your DB Setup, please reinstall your DB/MySQL..."
    adminuser_create_db_wemx
fi
}
full_install_db_wemx(){
sleep 3s
clear
notice "Attempting to create wemx database..."
notice "Since you made a 'SUPER ADMIN ACCOUNT' please use that instead of root!"
sleep 2s
echo "TIP: for localhost just use localhost or 127.0.0.1, this is for users who have cPanel or weird complex setups."
read -p "Enter the hostname or IP address of the MySQL server (Exmaple: 127.0.0.1 or 5.55.555.5):" DB_HOST
echo " "
read -p "Enter the MySQL root or super_admin username: " ROOT_USER
echo " "
read -sp "Enter the MySQL root or super_admin password: " ROOT_PASSWORD
echo " "
read -sp "Enter the new password for new user of "wemx": " WEMX_NEW_PASSWORD
echo " "
warning "If Your using root and Root's Password is BLANK then it will ask for a password, just hit enter if blank."
echo " "
sleep 3s

mysql -h$DB_HOST -u$ROOT_USER -p$ROOT_PASSWORD <<EOF
CREATE USER 'wemx'@'%' IDENTIFIED BY '$WEMX_NEW_PASSWORD';
CREATE DATABASE wemx;
GRANT ALL PRIVILEGES ON *.* TO 'wemx'@'%' WITH GRANT OPTION;
FLUSH PRIVILEGES;
EOF
notice "If your seeing this without any errors from mysql, your account was created successfully"
sleep 3s
notice "Clearing the passwords variables from memory..."
unset ROOT_PASSWORD WEMX_NEW_PASSWORD
success "Unsetting for security reasons.."
sleep 3s
success "Done & Cleared!"
sleep 2s
clear

mysql_secure_question
# Securing Database
}
mysql_secure_question(){
    notice "Attempting to Securing MariaDB Installation..."

    echo "Would you like to secure your MariaDB installation? It's recommended. (Y/n)"
    notice "If it's already secured please skip this. 99% of the time it's never secured on first/fresh installs of OS"
    read -p "Your choice (Y/N): " secure_choice

    if [[ $secure_choice =~ ^[Yy]$ ]]; then
        # Run MariaDB security script
        mysql_secure
    else
        warning "Skipped securing MariaDB installation. It's recommended to secure it in the future."
        wemx_install_continue
    fi
}
mysql_secure(){
notice "securing MySQL/MariaDB... please wait..."
sleep 3s
mysql_secure_installation
sleep 2s
wemx_install_continue
}
wemx_install_continue(){
cd /var/www/wemx
# End of Securing Database
notice "Running the 'Setup the environment'"
sleep 3s
php artisan setup:environment && php artisan setup:database
notice "Running the 'Setup database environment'"
sleep 3s
php artisan module:enable && php artisan storage:link

warning "Only run the key generation if you are installing WemX for the first time!!"
notice "IF your installing the first time, you will enter YES otherwise, No"
read -p "Do you want to generate a new key? This can cause MAC Invalid Issue if your running it a second time!! (yes/no): " answer
case $answer in
    [Yy]* )
        warning "RUNNING THE KEY GENERATE!!"
        php artisan key:generate --force;;
    [Nn]* )
        echo "Skipping key generation.";;
    * ) echo "Please answer yes or no.";;
esac
notice "Enable all the default modules and services..."
php artisan module:enable
notice "Create a symbolic link from public/storage to storage/app/public"
php artisan storage:link
notice "Migrate the database..."
php artisan migrate --force
notice "Setting the License key..."
sleep 3s
warning "You may will need to re-enter/paste the key from wemx again..."
php artisan license:update
sleep 2s
clear
sudo chown -R www-data:www-data /var/www/wemx/*
(crontab -l 2>/dev/null; echo "* * * * * php /var/www/wemx/artisan schedule:run >> /dev/null 2>&1") | crontab -
sleep 3s
clear
echo "Choose a command to run:"
echo "============================================================================"
echo "1. If you are migrating over from the previous Wemx Billing Module you can choose to import the users from the old billing module and your pterodactyl users."
echo "The following will be imported: Users, Addresses, Account Balance."
warning "1. At this moment, WemX only supports $ USD if you are using a different currency on the previous version, this might cause some issues. More currency support will be added."
echo "2. If you are not migrating over, this makes a new user."
echo "3. This just stops the script and will not make a user or import a user."
echo "============================================================================"
select opt in "Import Users" "Create New User" "Exit"
do
    case $opt in
        "Import Users")
            php artisan import:pterodactyl:users 2>&1 | tee temp_log.txt
            if grep -q "Table 'wings.billing_users' doesn't exist" temp_log.txt; then
                warning "Detected missing table 'wings.billing_users'."
                echo "Switching to user creation mode..."
                notice "This means that you never had Billing Module V1 or V2 installed before..."
                sleep 5s
                php artisan user:create
            elif grep -q "Could not connect to the database." temp_log.txt; then
                warning "Could not connect to the database."
                echo "Please check your database details and try again."
            elif grep -q "Users table does not exist in the provided database." temp_log.txt; then
                echo "Switching to user creation mode..."
                notice "This means that you never had Billing Module V1 or V2 installed before or connected to the incorrect database..."
				sleep 5s
                php artisan user:create
            fi

            rm temp_log.txt
            break   # exit the case
            ;;
        "Create New User")
            php artisan user:create
            break   # exit the case
            ;;
        "Exit")
            break   # exit the case
            ;;
        *) 
            echo "Invalid option $REPLY";;
    esac
    break  # exit the select loop after finishing any case
done
clear
success "Installation of WEMX is now 50% Completed"
sleep 5s
warning "IF YOU NEVER CREATED A USER, RUN 'php artisan user:create' in cd /var/www/wemx"
sleep 10s
clear
echo "============================================================================"
warning "If there was any issues during the install please cancel the script!"
warning "If there was no issues during the install you may contine the script!"
echo "============================================================================"
read -p "Do you wish to automatically configure your WEBSERVER/NGINX for WEMX? (y/N) " yn
while true; do

case $yn in
	[yY] ) echo Continuing to WEBSERVER INSTALLATION...;
		break;;
	[nN] ) echo Attempting to Exit...;
		exit;;
	* ) echo Invalid Response;;
esac
done
warning "We will be using and running SSL Version of Installation otherwise you will need to cancel and manually make your own WEBSERVER"
warning "Continuing in 15 Seconds... This is your only warning."
sleep 15s
clear
echo "Enter your DOMAIN that will be challenged for certbot."
read -p "Example, NekoHosting's Wemx Domain is nekohosting.gg | DOMAIN/URL: " WEMX_DOMAIN_URL
sudo systemctl stop nginx
sudo systemctl stop apache2 #I don't know but sometimes apache2 is installed for no reason.
sudo service apache2 stop
sudo service nginx stop
sudo netstat -tulnep | grep -E ':80|:443' | awk '{print $9}' | cut -d'/' -f1 | xargs sudo kill -9
sudo netstat -tulnep | grep -E ':80|:443' | awk '{print $9}' | cut -d'/' -f1 | xargs sudo kill -9
sudo netstat -tulnep | grep -E ':80|:443' | awk '{print $9}' | cut -d'/' -f1 | xargs sudo kill -9
echo "Choose a command to run:"
echo "============================================================================"
echo "1. DNS challenge"
echo "2. HTTP challenge Standalone (Recommend)"
echo "3. Cancel Script and exit."
echo "============================================================================"
select opt in "1" "2" "3"
do
    case $opt in
        "1")
			sudo systemctl stop nginx
			sudo systemctl stop apache2 #I don't know but sometimes apache2 is installed for no reason.
			sudo service apache2 stop
			sudo service nginx stop
			sudo netstat -tulnep | grep -E ':80|:443' | awk '{print $9}' | cut -d'/' -f1 | xargs sudo kill -9
			sudo netstat -tulnep | grep -E ':80|:443' | awk '{print $9}' | cut -d'/' -f1 | xargs sudo kill -9
            sudo certbot -d $WEMX_DOMAIN_URL --manual --preferred-challenges dns certonly
            break;;
        "2")
		    sudo systemctl stop nginx
			sudo systemctl stop apache2 #I don't know but sometimes apache2 is installed for no reason.
			sudo service apache2 stop
			sudo service nginx stop
			sudo netstat -tulnep | grep -E ':80|:443' | awk '{print $9}' | cut -d'/' -f1 | xargs sudo kill -9
			sudo netstat -tulnep | grep -E ':80|:443' | awk '{print $9}' | cut -d'/' -f1 | xargs sudo kill -9
            sudo certbot certonly --standalone -d $WEMX_DOMAIN_URL
            break;;		
        "3")
            break;;
        *) echo "Invalid option $REPLY";;
    esac
done
notice "If any issues, recommend looking at docs for certbot: https://pterodactyl.io/tutorials/creating_ssl_certificates.html#auto-renewal"
sleep 5s
sudo systemctl start nginx
sudo service wings stop
sudo systemctl stop wings
AVAILABLE_CONFIG="/etc/nginx/sites-available/wemx.conf"
ENABLED_CONFIG="/etc/nginx/sites-enabled/wemx.conf"
# Write the configuration to the file
cat > "$AVAILABLE_CONFIG" <<'EOF'
server {
    listen 80;
    server_name <domain>;
    server_tokens off;
    return 301 https://$server_name$request_uri;
}

server {
    listen 443 ssl http2;
    server_name <domain>;

    root /var/www/wemx/public;
    index index.php;

    access_log /var/log/nginx/wemx.app-access.log;
    error_log  /var/log/nginx/wemx.app-error.log error;

    # allow larger file uploads and longer script runtimes
    client_max_body_size 100m;
    client_body_timeout 120s;

    sendfile off;

    # SSL Configuration - Replace the example <domain> with your domain
    ssl_certificate /etc/letsencrypt/live/<domain>/fullchain.pem;
    ssl_certificate_key /etc/letsencrypt/live/<domain>/privkey.pem;
    ssl_session_cache shared:SSL:10m;
    ssl_protocols TLSv1.2 TLSv1.3;
    ssl_ciphers "ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384";
    ssl_prefer_server_ciphers on;

    # See https://hstspreload.org/ before uncommenting the line below.
    # add_header Strict-Transport-Security "max-age=15768000; preload;";
    add_header X-Content-Type-Options nosniff;
    add_header X-XSS-Protection "1; mode=block";
    add_header X-Robots-Tag "index, follow";
    add_header Content-Security-Policy "frame-ancestors 'self'";
    add_header X-Frame-Options DENY;
    add_header Referrer-Policy same-origin;

    location / {
        try_files $uri $uri/ /index.php?$query_string;
    }

    location ~ \.php$ {
        fastcgi_split_path_info ^(.+\.php)(/.+)$;
        fastcgi_pass unix:/run/php/php8.1-fpm.sock;
        fastcgi_index index.php;
        include fastcgi_params;
        fastcgi_param PHP_VALUE "upload_max_filesize = 100M \n post_max_size=100M";
        fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
        fastcgi_param HTTP_PROXY "";
        fastcgi_intercept_errors off;
        fastcgi_buffer_size 16k;
        fastcgi_buffers 4 16k;
        fastcgi_connect_timeout 300;
        fastcgi_send_timeout 300;
        fastcgi_read_timeout 300;
        include /etc/nginx/fastcgi_params;
    }

    location ~ /\.ht {
        deny all;
    }
}
EOF

# Replace the placeholder with the actual domain
sed -i "s/<domain>/$WEMX_DOMAIN_URL/g" "$AVAILABLE_CONFIG"
# If you want to continue with enabling the configuration for Nginx:
if [ ! -e "$ENABLED_CONFIG" ]; then
    sudo ln -s "$AVAILABLE_CONFIG" "$ENABLED_CONFIG"
else
    echo "Symbolic link $ENABLED_CONFIG already exists. Skipping link creation."
fi
# Test and reload nginx config
if sudo nginx -t; then
    sudo systemctl reload nginx
else
    echo "Nginx configuration test failed. Please review your settings."
fi
finish_install``
}
finish_install(){
sudo systemctl reload nginx
sudo systemctl start nginx
sudo service wings stop
sudo systemctl stop wings
sudo service wings start
sudo systemctl start wings
success "Installation of WEMX & WEBSERVER is now Completed and should be running!"
echo "============================================================================"
echo "This was the entire installer!"
echo "Thank You for using the WemxPROAuto Installer!"
echo "Made by nwya#0 or VanillaChan#6571"
echo "============================================================================"
success "Exited WemxPRO-Installer-2.0.0"
}
#Start of Script
echo "============================================================================"
echo "WemxPRO | Wemx Pro INSTALLER Script 2.0.0 EXPERIMENTAL"
echo
echo "Copyright (C) 2021 - $(date +%Y), NekoHosting LLC"
echo "https://github.com/VanillaChan6571/WemxProAuto"
echo
warning "DO NOT RUN THIS IF YOU ALREADY HAVE A WEMX INSTALLED!"
echo "YOU SHOULD ONLY RUN THIS IF YOU WISH TO DO A NEW INSTALL!"
echo "============================================================================"
echo "Patch Notes for 2.0.0"
echo "+ New Install Methods."
echo "+ Add pterodactyl method to auto install first or skip."
echo "+ Marked EXPERIMENTAL "
echo "============================================================================"
#Checks to continue#
while true; do
    echo "Do you want to proceed with the script? [Script: WemxPRO-Installer-2.0.0-EXPERIMENTAL]"
	echo " "
	echo "Full: This does the full install of Pterodactyl+Wemx, (Recommeneded for New Systems)"
	echo "Wemx: This only installs wemx + db, (Recommended for Just Installing Wemx + DB)"
	echo " "
	notice "There is other Choices like Renew certificates(RenewCert) or Making a new User (UserCreate)"
    read -p "Which type of install do you wish to do? (Full, Wemx, UpdateWemx, RenewCert, UserCreate, MakeMyDBPublic): " choice
    case $choice in
		MakeMyDBPublic)
			echo "Changing Database Binding Address to 0.0.0.0 This will allow remote connections to your DB..."
			warning "IF you do not wish to change the Binding Address, Control + C to cancel the changes! or wait 10 seconds to continue..."
			echo "installing MariaDB 11.1... please wait..."
			sleep 2s
			# Detect the Ubuntu version
			version=$(lsb_release -rs)
			# Match the version to its codename
			case $version in
				18.04) codename="bionic" ;;
				20.04) codename="focal" ;;
				22.04) codename="jammy" ;;
				22.10) codename="kinetic" ;;
				23.04) codename="lunar" ;;
				23.10) codename="mantic" ;;
				*)     codename="jammy" ;; # default to jammy for unknown versions
			esac
			echo "Detected Ubuntu Version: $version ($codename)"
			# Install apt-transport-https and curl
			sudo apt-get update
			sudo apt-get install -y apt-transport-https curl
			# Setup the MariaDB repository
			sudo mkdir -p /etc/apt/keyrings
			sudo curl -o /etc/apt/keyrings/mariadb-keyring.pgp 'https://mariadb.org/mariadb_release_signing_key.pgp'
			# Create the mariadb.sources file
			cat << EOF | sudo tee /etc/apt/sources.list.d/mariadb.sources
# MariaDB 11.1 repository list [2024]
# https://mariadb.org/download/
X-Repolib-Name: MariaDB
Types: deb
# deb.mariadb.org is a dynamic mirror if your preferred mirror goes offline. See https://mariadb.org/mirrorbits/ for details.
# URIs: https://deb.mariadb.org/11.1/ubuntu
URIs: https://mirrors.xtom.com/mariadb/repo/11.1/ubuntu
Suites: $codename
Components: main main/debug
Signed-By: /etc/apt/keyrings/mariadb-keyring.pgp
EOF
			# Update the package lists
			sudo apt-get update
			# Install MariaDB server
			sudo apt-get install -y mariadb-server
			echo "MariaDB installation has been completed."
			sleep 3s
			clear
			notice "Adding "add-apt-repository" command..."
			sudo apt -y install software-properties-common curl apt-transport-https ca-certificates gnupg
			notice "Adding additional repositories for PHP, Redis, and MariaDB..."
			sudo LC_ALL=C.UTF-8 add-apt-repository -y ppa:ondrej/php
			notice "Adding Redis official APT repository..."
			sudo curl -fsSL https://packages.redis.io/gpg | sudo gpg --dearmor -o /usr/share/keyrings/redis-archive-keyring.gpg
			echo "deb [signed-by=/usr/share/keyrings/redis-archive-keyring.gpg] https://packages.redis.io/deb $(lsb_release -cs) main" | sudo tee /etc/apt/sources.list.d/redis.list
			warning "You should manually run 'sudo curl -sS https://downloads.mariadb.com/MariaDB/mariadb_repo_setup | sudo bash' since 20.04 or lower is not supported for this script."
			notice "Updating Packages..."
			sudo apt update && sudo apt upgrade -y
			warning "You should manually run 'sudo apt-add-repository universe' since 18.04 is not supported for this script."
			sudo apt -y install php8.1 php8.1-{common,cli,gd,mysql,mbstring,bcmath,xml,fpm,curl,zip} mariadb-server nginx tar unzip git redis-server mariadb-client net-tools
			sleep 10s
			CONFIG_FILE="/etc/mysql/mariadb.conf.d/50-server.cnf"
			if grep -q "^bind-address" $CONFIG_FILE; then
				sudo sed -i '/^bind-address/c\bind-address = 0.0.0.0' $CONFIG_FILE
			else
				# bind-address does not exist, so append it
				echo "bind-address = 0.0.0.0" | sudo tee -a $CONFIG_FILE > /dev/null
				fi
				# Restart MariaDB to apply changes
				sudo systemctl restart mariadb
				# Optional: Confirm bind-address change
				echo "bind-address updated to 0.0.0.0 and MariaDB restarted."
			sleep 2s
			full_install
			break;;
        Full)
            echo "Proceeding with Full Install..."
            echo "Continuing..."
			warning "Control + C to cancel the install now! or wait 10 seconds..."
			sleep 10s
			echo "installing MariaDB 11.1... please wait..."
			# Detect the Ubuntu version
			version=$(lsb_release -rs)
			# Match the version to its codename
			case $version in
				18.04) codename="bionic" ;;
				20.04) codename="focal" ;;
				22.04) codename="jammy" ;;
				22.10) codename="kinetic" ;;
				23.04) codename="lunar" ;;
				23.10) codename="mantic" ;;
				*)     codename="jammy" ;; # default to jammy for unknown versions
			esac
			echo "Detected Ubuntu Version: $version ($codename)"
			# Install apt-transport-https and curl
			sudo apt-get update
			sudo apt-get install -y apt-transport-https curl
			# Setup the MariaDB repository
			sudo mkdir -p /etc/apt/keyrings
			sudo curl -o /etc/apt/keyrings/mariadb-keyring.pgp 'https://mariadb.org/mariadb_release_signing_key.pgp'
			# Create the mariadb.sources file
			cat << EOF | sudo tee /etc/apt/sources.list.d/mariadb.sources
# MariaDB 11.1 repository list [2024]
# https://mariadb.org/download/
X-Repolib-Name: MariaDB
Types: deb
# deb.mariadb.org is a dynamic mirror if your preferred mirror goes offline. See https://mariadb.org/mirrorbits/ for details.
# URIs: https://deb.mariadb.org/11.1/ubuntu
URIs: https://mirrors.xtom.com/mariadb/repo/11.1/ubuntu
Suites: $codename
Components: main main/debug
Signed-By: /etc/apt/keyrings/mariadb-keyring.pgp
EOF
			# Update the package lists
			sudo apt-get update
			# Install MariaDB server
			sudo apt-get install -y mariadb-server
			echo "MariaDB installation has been completed."
			sleep 3s
			clear
			notice "Adding "add-apt-repository" command..."
			sudo apt -y install software-properties-common curl apt-transport-https ca-certificates gnupg
			notice "Adding additional repositories for PHP, Redis, and MariaDB..."
			sudo LC_ALL=C.UTF-8 add-apt-repository -y ppa:ondrej/php
			notice "Adding Redis official APT repository..."
			sudo curl -fsSL https://packages.redis.io/gpg | sudo gpg --dearmor -o /usr/share/keyrings/redis-archive-keyring.gpg
			echo "deb [signed-by=/usr/share/keyrings/redis-archive-keyring.gpg] https://packages.redis.io/deb $(lsb_release -cs) main" | sudo tee /etc/apt/sources.list.d/redis.list
			warning "You should manually run 'sudo curl -sS https://downloads.mariadb.com/MariaDB/mariadb_repo_setup | sudo bash' since 20.04 or lower is not supported for this script."
			notice "Updating Packages..."
			sudo apt update && sudo apt upgrade -y
			warning "You should manually run 'sudo apt-add-repository universe' since 18.04 is not supported for this script."
			sudo apt -y install php8.1 php8.1-{common,cli,gd,mysql,mbstring,bcmath,xml,fpm,curl,zip} mariadb-server nginx tar unzip git redis-server mariadb-client net-tools
			sleep 2s
		    echo "Installing ALL, please wait..."
			sleep 2s
			full_install
            break;;
        Wemx)
            echo "Proceeding with Wemx + DB Only Install..."
            echo "Continuing..."
			sleep 10s
			echo "installing MariaDB 11.1... please wait..."
			# Detect the Ubuntu version
			version=$(lsb_release -rs)
			# Match the version to its codename
			case $version in
				18.04) codename="bionic" ;;
				20.04) codename="focal" ;;
				22.04) codename="jammy" ;;
				22.10) codename="kinetic" ;;
				23.04) codename="lunar" ;;
				23.10) codename="mantic" ;;
				*)     codename="jammy" ;; # default to jammy for unknown versions
			esac
			echo "Detected Ubuntu Version: $version ($codename)"
			# Install apt-transport-https and curl
			sudo apt-get update
			sudo apt-get install -y apt-transport-https curl
			# Setup the MariaDB repository
			sudo mkdir -p /etc/apt/keyrings
			sudo curl -o /etc/apt/keyrings/mariadb-keyring.pgp 'https://mariadb.org/mariadb_release_signing_key.pgp'
			# Create the mariadb.sources file
			cat << EOF | sudo tee /etc/apt/sources.list.d/mariadb.sources
# MariaDB 11.1 repository list [2024]
# https://mariadb.org/download/
X-Repolib-Name: MariaDB
Types: deb
# deb.mariadb.org is a dynamic mirror if your preferred mirror goes offline. See https://mariadb.org/mirrorbits/ for details.
# URIs: https://deb.mariadb.org/11.1/ubuntu
URIs: https://mirrors.xtom.com/mariadb/repo/11.1/ubuntu
Suites: $codename
Components: main main/debug
Signed-By: /etc/apt/keyrings/mariadb-keyring.pgp
EOF
			# Update the package lists
			sudo apt-get update
			# Install MariaDB server
			sudo apt-get install -y mariadb-server
			echo "MariaDB installation has been completed."
			sleep 3s
			clear
			notice "Adding "add-apt-repository" command..."
			sudo apt -y install software-properties-common curl apt-transport-https ca-certificates gnupg
			notice "Adding additional repositories for PHP, Redis, and MariaDB..."
			sudo LC_ALL=C.UTF-8 add-apt-repository -y ppa:ondrej/php
			notice "Adding Redis official APT repository..."
			sudo curl -fsSL https://packages.redis.io/gpg | sudo gpg --dearmor -o /usr/share/keyrings/redis-archive-keyring.gpg
			echo "deb [signed-by=/usr/share/keyrings/redis-archive-keyring.gpg] https://packages.redis.io/deb $(lsb_release -cs) main" | sudo tee /etc/apt/sources.list.d/redis.list
			warning "You should manually run 'sudo curl -sS https://downloads.mariadb.com/MariaDB/mariadb_repo_setup | sudo bash' since 20.04 or lower is not supported for this script."
			notice "Updating Packages..."
			sudo apt update && sudo apt upgrade -y
			warning "You should manually run 'sudo apt-add-repository universe' since 18.04 is not supported for this script."
			sudo apt -y install php8.1 php8.1-{common,cli,gd,mysql,mbstring,bcmath,xml,fpm,curl,zip} mariadb-server nginx tar unzip git redis-server mariadb-client net-tools
			sleep 2s
			echo "Skipping pterodactyl... Installing Wemx..."
			notice "It may suggest if Pterodactyl install was successful, you can ignore."
			sleep 2s
			wemx_install
            break;;
        UpdateWemx)
            echo "Proceeding with Wemx + DB Only Install..."
            echo "Continuing..."
			cd /var/www/wemx
			notice "Wemx Installer will be ran in this setup... We will need the key for it to work."
			read -p "Enter the License Key for WEMX: " WEMX_KEY
			notice "if you wish to not always enter your license key, edit this script to find out more!"
			COMPOSER_ALLOW_SUPERUSER=1 composer require wemx/installer dev-web
			php artisan wemx:install $WEMX_KEY
			#Hello! If you are reading this, you can technically use the following:
			#php artisan wemx:install license-key-here
			#This will make it more automated and really let it do everything.
			chmod -R 755 storage/* bootstrap/cache
			chown -R www-data:www-data /var/www/wemx/*
			COMPOSER_ALLOW_SUPERUSER=1 composer update
			COMPOSER_ALLOW_SUPERUSER=1 composer install --optimize-autoloader
			php artisan module:enable
			php artisan view:clear && php artisan config:clear
			php artisan migrate --seed --force
			php artisan module:publish
			chown -R www-data:www-data /var/www/wemx/*
			notice "Clearing the WEMX KEY variable from memory..."
			unset WEMX_KEY
			success "Unsetting for security reasons.."
			success "Done & Cleared!"
			success "Script Complete"
			finish_install
            break;;
		RenewCert)
		    echo "Proceeding with renewing certificates.."
			sudo certbot renew
			finish_install
            break;;
		UserCreate)
			echo "Continuing..."
                while true; do
                    clear
                    notice "Are you going to make Wemx(WUC) or Pterodactyl(PTERO) User?"
                    read -p "Please Choose Which User Your Going to make: " user_c_choice

                    case $user_c_choice in
                        WUC)
                            echo "Proceeding with creating wemx user..."
							cd /var/www/wemx
							php artisan user:create
                            finish_install
                            break 2;; # Break out of both loops
                        PTERO)
                            echo "Proceeding with creating pterodactyl user...."
							cd /var/www/pterodactyl
							php artisan p:user:make
                            finish_install
                            break 2;; # Break out of both loops
                        *)
                            echo "Invalid Response"
                            # The loop will ask again for the admin_choice
                            ;;
                    esac
                done
			finish_install
            break;;
        *)
            echo "Invalid Response"
            # Prompt the user again for input
            ;;
    esac
done