Working for Q8 v1.6 #474
Replies: 43 comments
-
|
Yea we have that also working (q8 v1.2 and v1.6), the only thing thats need to be finished is the key mapping... |
Beta Was this translation helpful? Give feedback.
-
|
someone get right lcd driver and merge into https://github.com/steward-fu/q8 ..... |
Beta Was this translation helpful? Give feedback.
-
|
Yea we have another builds working around there on the Q8 (including the one form Steward) but thats not the main task, our current source code should handle the Q8 along the other Miyoo consoles, thats the main purpose. i didnt had the time to adapt the current source code with the Q8 stuff, thats why the Q8 isnt still added on the official list. No one at this moment have helped with this, there are few people who got the Q8 stuff working but using an old source code, not the new one, and thats where we need to have it working. |
Beta Was this translation helpful? Give feedback.
-
@wgarnett Do all the buttons work for you in the games and emulators and the sound? |
Beta Was this translation helpful? Give feedback.
-
|
steward-fu/q8 ... replace 7z files with it ..... |
Beta Was this translation helpful? Give feedback.
-
I tried that yesterday, and it didn't work for me, the image looked bad I save the image in the sd and the content of the file Q8.7z put in the partition FC3000. With the image q8_od_jckl_no_roms it looks bad and not finish loading. |
Beta Was this translation helpful? Give feedback.
-
|
7z files only match for q8_od_jckl_no_roms ..... |
Beta Was this translation helpful? Give feedback.
-
|
not finish loading => change another SD card or reboot more times .... until success |
Beta Was this translation helpful? Give feedback.
-
|
I have rewritten the image q8_od_jckl_no_roms. You can check that the content of the Q8.7z file you uploaded is correct, the mininit and rootfs files are the same size as in the image. If the content you have uploaded is correct, I have another screen on my console (version 1.6 firmware) |
Beta Was this translation helpful? Give feedback.
-
|
@salvacam I recheck Q8.7z , it's right ..... and I have a new question , anyone know how to change boot screen ??? I want to change a picture that I like myself |
Beta Was this translation helpful? Give feedback.
-
|
I think the image needs to be recompiled |
Beta Was this translation helpful? Give feedback.
-
|
@salvacam , thanks , and now do your Q8 work ??? |
Beta Was this translation helpful? Give feedback.
-
|
No. I have gone back to do the same process a couple of times and I have the same result. I am doing something wrong or my screen is different from yours I save the image q8_od_jckl_no_roms and copy the files from Q8.7z to the FC3000 partition Can you record an image from your SD card and share it for testing? |
Beta Was this translation helpful? Give feedback.
-
|
@salvacam , full image => https://www.mediafire.com/file/qg27qq7pllykwok/q8_od_fix.7z/file |
Beta Was this translation helpful? Give feedback.
-
|
If the image is 16bit format (rgb565) and the screen resolution is 320x240, then the binary size should match. From there you should look for any similarites in decompiled Hex and look for similar string in size (I assume it would be easier if you had that image file). |
Beta Was this translation helpful? Give feedback.
-
|
@Apaczer , splash image is here , https://github.com/steward-fu/q8/releases |
Beta Was this translation helpful? Give feedback.
-
|
I can see there only 80x80px Framebuffer boot-up logos, is that what you mean? Sorry I do not owe the device, so I'm only guessing. |
Beta Was this translation helpful? Give feedback.
-
|
Splash image is like this if you decompile it from logos |
Beta Was this translation helpful? Give feedback.
-
Use this image and set your OFFSET in Hex editor to 4C064 (use guideline from reddit), the splash image string probably resides there but I can't be 100% sure (between 4C064 and 71864 blocks). Please be aware that you can damage your SD card this way. |
Beta Was this translation helpful? Give feedback.
-
@Apaczer |
Beta Was this translation helpful? Give feedback.
-
Do you have the screen driver source code of this package? |
Beta Was this translation helpful? Give feedback.
-
Do you have the screen driver source code of this package? |
Beta Was this translation helpful? Give feedback.
-
No, I don't have any code. |
Beta Was this translation helpful? Give feedback.
-
|
@wgarnett is key mapping working for you? On my m3, which is clone of q8, none of buttons working. How did you manage correct key mappings? |
Beta Was this translation helpful? Give feedback.
-
|
steps which I have done
|
Beta Was this translation helpful? Give feedback.
-
|
@tiopex , I don't have M3 , you can try to modify gmenu2x/input.conf and test |
Beta Was this translation helpful? Give feedback.
-
|
@wgarnett do you have source code of video driver from below image?
|
Beta Was this translation helpful? Give feedback.
-
|
The file is in the steward-fu repository kernel source https://github.com/steward-fu/q8/releases |
Beta Was this translation helpful? Give feedback.
-
|
duplicate of #242, moving to discuss |
Beta Was this translation helpful? Give feedback.
-
Boot Section and LCD Driver Working
Beta Was this translation helpful? Give feedback.
All reactions