PowKiddy A30 Support?

[StickyChannel92]

I got a PowKiddy A30, and was not immediately impressed about the current TrimUI on the system. So I tried putting in a Miyoo-CFW SD card in. I powered it on, and it showed the MiyooCFW screen, but nothing happens. I was wondering if it was possible to try fixing that, if anyone has come up with a solution to run MiyooCFW on the PowKiddy A30?

[Rezzy-dev]

That will be because there are no drivers yet for that hardware. The PowKiddy A30 is not yet supported by the MiyooCFW to my best knowledge, but I'll let the experts weigh in here.

The A30's specs that I was able to find are:

Screen: 2.8inch 320x240 IPS
CPU: Allwinner, ARM, Single Core F1C200S, ARM926EJ-S, 628 MHz
GPU: 2D accelerator

RAM: 64 MB LPDDR2
Storage: External MicroSD
Battery: 1200 mAh

It does seem to me that support for it could be added in the (near-)future. (But, as I said, I'm not an expert on this.)

[Rezzy-dev]

Device review:

https://www.youtube.com/watch?v=8Tn-CcTd4sQ

@StickyChannel92 If you're not happy with the device or its firmware, it may be a good idea to return it and get a refund. It's not a popular PowKiddy device at all, unfortunately.