func.sh

#!/bin/bash

MENDEL_DEV=/dev/arduino

#
# this file is designed to be sourced into your current shell like this:
#
# source ./func.sh
#
# and then used like this:
#
# $ mendel_cmd G1 X100
# $ mendel_cmd M250
#
# {X:4200,Y:0,Z:0,E:0,F:300,c:19334400}
# {X:4200,Y:0,Z:0,E:0,F:300,c:0}
# Q1/1E
# $ mendel_readsym_uint8 mb_head
# 1
# $ mendel_readsym_target startpoint
# X: 2100
# Y: 0
# Z: 0
# E: 0
# F: 300
# $ mendel_readsym_mb
# [0] {
#         eX: 0   eY: 0   eZ: 0   eE: 0   eF: 0
#         flags: 0
#         dX: 0   dY: 0   dZ: 0   dE: 0
#         cX: 0   cY: 0   cZ: 0   cE: 0
#         ts: 0
#         c: 0    ec: 0   n: 0
# }
# [HEAD,TAIL:1] {
#         eX: 4200        eY: 0   eZ: 0   eE: 0   eF: 300
#         flags: 120
#         dX: 4200        dY: 0   dZ: 0   dE: 0
#         cX: -2100       cY: -2100       cZ: -2100       cE: -2100
#         ts: 4200
#         c: 19334400     ec: 0   n: 0
# }
# [2] {
#         eX: 0   eY: 0   eZ: 0   eE: 0   eF: 0
#         flags: 0
#         dX: 0   dY: 0   dZ: 0   dE: 0
#         cX: 0   cY: 0   cZ: 0   cE: 0
#         ts: 0
#         c: 0    ec: 0   n: 0
# }
# [3] {
#         eX: 0   eY: 0   eZ: 0   eE: 0   eF: 0
#         flags: 0
#         dX: 0   dY: 0   dZ: 0   dE: 0
#         cX: 0   cY: 0   cZ: 0   cE: 0
#         ts: 0
#         c: 0    ec: 0   n: 0
# }
# [4] {
#         eX: 0   eY: 0   eZ: 0   eE: 0   eF: 0
#         flags: 0
#         dX: 0   dY: 0   dZ: 0   dE: 0
#         cX: 0   cY: 0   cZ: 0   cE: 0
#         ts: 0
#         c: 0    ec: 0   n: 0
# }
# [5] {
#         eX: 0   eY: 0   eZ: 0   eE: 0   eF: 0
#         flags: 0
#         dX: 0   dY: 0   dZ: 0   dE: 0
#         cX: 0   cY: 0   cZ: 0   cE: 0
#         ts: 0
#         c: 0    ec: 0   n: 0
# }
# [6] {
#         eX: 0   eY: 0   eZ: 0   eE: 0   eF: 0
#         flags: 0
#         dX: 0   dY: 0   dZ: 0   dE: 0
#         cX: 0   cY: 0   cZ: 0   cE: 0
#         ts: 0
#         c: 0    ec: 0   n: 0
# }
# [7] {
#         eX: 0   eY: 0   eZ: 0   eE: 0   eF: 0
#         flags: 0
#         dX: 0   dY: 0   dZ: 0   dE: 0
#         cX: 0   cY: 0   cZ: 0   cE: 0
#         ts: 0
#         c: 0    ec: 0   n: 0
# }


# Initialize serial port settings
mendel_setup() {
	stty 115200 raw ignbrk -hup -echo ixoff < $MENDEL_DEV
}

# Reset the arduino by dripping DTR
mendel_reset() {
	stty hup < $MENDEL_DEV
	stty hup < $MENDEL_DEV
	mendel_setup
}

#Connect, and type in commands and see the response yourself.
#Basically, a lightweight terminal implementation
mendel_talk() {
	# If there is already a 'cat' process associated with this terminal,
	# don't kill it.
	if ps | grep 'cat$' >/dev/null; then
		skip_kill_cat=1
	fi
	echo "press ctrl+D to exit"
	( cat <&3 & cat >&3; kill $! ; ) 3<>$MENDEL_DEV
	# You're supposed to use "^D" to exit. If somebody uses "^C" instead,
	# it leaves the "cat" process connected between the terminal and $MENDEL_DEV
	# detect this condition and kill that process.
	if [ "$skip_kill_cat" == "" ]; then
		kill `ps | grep 'cat$'| cut -d " " -f -1` 2>/dev/null
	fi
}

# Send a command, printing the reply.
mendel_cmd() {
	(
		local IFS=$' \t\n'
		local RSC=0
		local cmd="$*"
		echo "$cmd" >&3;
		local REPLY=""
		while ! [[ "$REPLY" =~ ^OK ]] && ! [[ "$REPLY" =~ ^ok ]]
		do
			read -u 3
			echo "${REPLY##ok }"
			if [[ "$REPLY" =~ ^RESEND ]] || [[ "$REPLY" =~ ^rs ]]
			then
				if [ "$RSC" -le 3 ]
				then
					echo "$cmd" >&3
					RSC=$(( $RSC + 1 ))
				else
					REPLY="OK"
					echo "Too many retries: aborting" >&2
				fi
			fi
		done
	) 3<>$MENDEL_DEV;
}

#Send a command, printing both the command and the reply, prefix so you can tell which is which.
mendel_cmd_hr() {
	(
		local IFS=$' \t\n'
		local cmd="$*"
		local RSC=0
		echo "$cmd" >&3
		echo "S> $cmd"
		local REPLY=""
		while ! [[ "$REPLY" =~ ^OK ]] && ! [[ "$REPLY" =~ ^ok ]]
		do
			read -u 3
			echo "<R $REPLY"
			if [[ "$REPLY" =~ ^RESEND ]] || [[ "$REPLY" =~ ^rs ]]
			then
				if [ "$RSC" -le 3 ]
				then
					echo "$cmd" >&3
					echo "S> $cmd"
					RSC=$(( $RSC + 1))
				else
					REPLY="OK"
					echo "Too many retries: aborting" >&2
				fi
			fi
		done
	) 3<>$MENDEL_DEV;
}

# Print a gcode file. Echos commands and replies.
mendel_print() {
	(
		for F in "$@"
		do
			local IFS=$'\n'
			for L in $(< $F)
			do
				mendel_cmd_hr "$L"
			done
		done
	)
}

# Print a gcode file. Press a key after each line. Echos commands and replies.
mendel_print_interactive() {
	(
		for F in "$@"
		do
			local IFS=$'\n'
			for L in $(< $F)
			do
				mendel_cmd_hr "$L"
				read
			done
		done
	)
}

# Use the debug interface to directly read memory.
# Usage:
#	mendel_readsym 0x<address>(:<size>)
#   mendel_readsym <name>
# determines address and size of "name" from mendel.sym
mendel_readsym() {
	(
		local IFS=$' \t\n'
		local sym=$1
		if [ -n "$sym" ]
		then
			if [[ "$sym" =~ ^(0?x?[0-9A-Fa-f]+)(:([0-9]+))?$ ]]
			then
				local ADDR=$(( ${BASH_REMATCH[1]} ))
				local SIZE=$(( ${BASH_REMATCH[3]} ))
				if [ "$SIZE" -le 1 ]
				then
					SIZE=1
				fi
				mendel_cmd "M253 S$ADDR P$SIZE"
			else
				make mendel.sym &>/dev/null
				if egrep -q '\b'$sym'\b' mendel.sym
				then
					local ADDR=$(( $(egrep '\b'$sym'\b' mendel.sym | cut -d\  -f1) ))
					local SIZE=$(egrep '\b'$sym'\b' mendel.sym | cut -d+ -f2)
					mendel_cmd "M253 S$ADDR P$SIZE"
				else
					echo "unknown symbol: $sym"
				fi
			fi
		else
			echo "what symbol?" > /dev/fd/2
		fi
	)
}

mendel_readsym_uint8() {
	local sym=$1
	local val=$(mendel_readsym $sym)
	perl -e 'printf "%u\n", hex "0x".$ARGV[0]' $val
}

mendel_readsym_int8() {
	local sym=$1
	local val=$(mendel_readsym $sym)
	perl -e 'printf "%d\n", ((hex "0x".$ARGV[0]) & 0x7F) - (((hex "0x".$ARGV[0]) & 0x80)?0x80:0)' $val
}

mendel_readsym_uint16() {
	local sym=$1
	local val=$(mendel_readsym $sym)
	perl -e '$ARGV[0] =~ m#(..)(..)# && printf "%u\n", hex "0x$2$1"' $val
}

mendel_readsym_int16() {
	local sym=$1
	local val=$(mendel_readsym $sym)
	perl -e '$ARGV[0] =~ m#(..)(..)# && printf "%d\n", ((hex "0x$2$1") & 0x7FFF) - (((hex "0x$2$1") & 0x8000)?0x8000:0)' $val
}

mendel_readsym_uint32() {
	local sym=$1
	local val=$(mendel_readsym $sym)
	perl -e '$ARGV[0] =~ m#(..)(..)(..)(..)# && printf "%u\n", hex "0x$4$3$2$1"' $val
}

mendel_readsym_int32() {
	local sym=$1
	local val=$(mendel_readsym $sym)
	perl -e '$ARGV[0] =~ m#(..)(..)(..)(..)# && printf "%d\n", hex "0x$4$3$2$1"' $val
}

mendel_readsym_target() {
	local sym=$1
	local val=$(mendel_readsym "$sym")
	if [ -n "$val" ]
	then
		perl -e '@a = qw/X Y Z E F/; $c = 0; while (length $ARGV[0]) { last unless $ARGV[0] =~ s#^(..)(..)(..)(..)##; printf "%s: %d\n", $a[$c], hex "0x$4$3$2$1"; $c++; }' "$val"
	fi
}

mendel_readsym_mb() {
	local val=$(mendel_readsym movebuffer)
	local mbhead=$(mendel_readsym mb_head)
	local mbtail=$(mendel_readsym mb_tail)
	perl - <<'ENDPERL' -- $val $mbhead $mbtail
		$i = -1;
		@a = qw/eX 4 eY 4 eZ 4 eE 4 eF 4 flags 9 dX 12 dY 4 dZ 4 dE 4 cX 12 cY 4 cZ 4 cE 4 ts 12 c 12 rs 4 sn 4 cm 4 n 4 rs 1/;
		$c = 0;
		$c = 1234567;
		while (length $ARGV[1]) {
			if ($c > ($#a / 2)) {
				$i++;
				$c = 0;
				printf "\n}\n"
					if ($i > 0);
				printf "[%s%d] {\n", (($i == $ARGV[2])?"HEAD":"").(($ARGV[2] == $ARGV[3] && $ARGV[2] == $i)?",":"").(($i == $ARGV[3])?"TAIL":"").(($i == $ARGV[2] || $i == $ARGV[3])?":":""), $i
			}
			if ($a[$c * 2 + 1] & 8) {
				printf "\n";
			}
			if (($a[$c * 2 + 1] & 7) == 4) {
				$ARGV[1] =~ s#^(..)(..)(..)(..)##;
				printf "\t%s: %d", $a[$c * 2], hex "0x$4$3$2$1";
			}
			elsif (($a[$c * 2 + 1] & 7) == 1) {
				$ARGV[1] =~ s#^(..)##;
				printf "\t%s: %d", $a[$c * 2], hex "0x$1";
			}
			$c++;
		}
		printf "\n}\n";
ENDPERL
}

# Read status of PID routines.
mendel_heater_pid() {
	local P=$(mendel_readsym_int16 heater_p)
	local I=$(mendel_readsym_int16 heater_i)
	local D=$(mendel_readsym_int16 heater_d)

	local PF=$(mendel_readsym_int32 p_factor)
	local IF=$(mendel_readsym_int32 i_factor)
	local DF=$(mendel_readsym_int32 d_factor)

	local O=$(mendel_readsym_uint8 0x27)
	local T=$(mendel_cmd M105 | cut -d\  -f2 | cut -d/ -f1)

	echo "P=$P	pf=$PF	r="$(($P * $PF))
	echo "I=$I	if=$IF	r="$(($I * $IF))
	echo "D=$D	df=$DF	r="$(($D * $DF))
	echo "R="$(( $(($P * $PF)) + $(($I * $IF)) + $(($D * $DF)) )) / 1024
	echo "R="$(( $(( $(($P * $PF)) + $(($I * $IF)) + $(($D * $DF)) )) / 1024 ))
	echo "R="$(( $(( $(( $(($P * $PF)) + $(($I * $IF)) + $(($D * $DF)) )) / 1024 )) + 128 ))
	echo "O=$O	T=$T"
}

if [[ "$0" =~ ^mendel_(setup|reset|talk|cmd|readsym|heater_pid|print) ]]
then
	eval "$0" "$@"
fi

if [[ "$1" =~ ^mendel_(setup|reset|talk|cmd|readsym|heater_pid|print) ]]
then
	eval "$@"
fi