Skip to content

Commit

Permalink
docs(u-boot): AM335X: Update splash screen details for 09.03.05.02
Browse files Browse the repository at this point in the history 
Update splash screen details with defconfig changes to enable
splash screen.
Add steps to test the splash screen.
Add the reference output image on AM335x EVM.

Signed-off-by: Sukrut Bellary <[email protected]>
  • Loading branch information
@praneethbajjuri
Sukrut Bellary authored and praneethbajjuri committed Dec 13, 2024
1 parent 0082c9a commit 0cbc0f5
Show file tree
Hide file tree
Showing 2 changed files with 44 additions and 229 deletions.
Binary file added source/images/AM335x_evm_uboot_splash_screen.jpg
View file
Loading
Sorry, something went wrong. Reload?
Sorry, we cannot display this file.
Sorry, this file is invalid so it cannot be displayed.
273 changes: 44 additions & 229 deletions source/linux/Foundational_Components/U-Boot/Apps-Splash-Screen.rst
View file
Original file line number Diff line number Diff line change
Expand Up @@ -10,247 +10,62 @@ U-Boot Splash Screen
.. rubric:: AM335x
:name: am335x

All the code below is based on Processor Linux SDK 03.02.00..05.
A splash screen is an introductory screen the user sees over the display when the device boots up. Splash screens are typically used to provide feedback to the user that the board is booting up and to showcase
the vendor logo which helps with branding and identification of which boot image is being used for the bootup.
All the code related to u-boto splash screen support is based on Processor Linux SDK 09.03.05.02.

There is a frame buffer driver for am335x in the drivers/video directory
called am3355x-fb.c. It makes calls to routines in board.c to set up the
LCDC and frame buffer. To use it:
For AM335x, splash screen is enabled in u-boot which uses the LCDC driver.
On AM335x evm, the LCD backlight is controlled using enhanced Auxiliary(eCAP0) PWM.
To use this, enable following configurations in configs/am335x_evm_defconfig.

Either create a new defconfig in the configs directory or just add
SPLASH to CONFIG\_SYS\_EXTRA\_OPTIONS. In this example the
am335x\_evm\_defconfig is copied into a new one called
am335x\_evm\_splash\_defconfig.
.. code-block:: kconfig
.. code-block:: text
CONFIG_SPLASH_SCREEN=y
CONFIG_SPLASH_SOURCE=y
CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_HIDE_LOGO_VERSION=y
CONFIG_AM335X_LCD=y
CONFIG_VIDEO_BMP_GZIP=y
CONFIG_BMP_24BPP=y
CONFIG_BMP_32BPP=y
CONFIG_BMP=y
CONFIG_VIDEO=y
CONFIG_CMD_BMP=y
CONFIG_SYSCON=y
CONFIG_REGMAP=y
CONFIG_CLK_CCF=y
CONFIG_CLK_TI_AM3_DPLL=y
CONFIG_CLK_TI_DIVIDER=y
CONFIG_CLK_TI_MUX=y
CONFIG_DM_PWM=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_PWM_TI_ECAP=y
CONFIG_TARGET_AM335X_EVM=y
CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_DEFAULT_DEVICE_TREE="am335x-evm"
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SYS_EXTRA_OPTIONS="NAND,SPLASH"
CONFIG_HUSH_PARSER=y
CONFIG_AUTOBOOT_KEYED=y
.. rubric:: Display Image using U-Boot command line
:name: Display Image

In include/configs/am335x\_evm.h, add support for the splash screen,
LCDC, and gzipped bitmaps.
To test the display and video driver in U-Boot, run the following commands at U-Boot console:

::
.. code-block:: console
/* Splash scrren support */
#ifdef CONFIG_SPLASH
#define CONFIG_AM335X_LCD
#define CONFIG_LCD
#define CONFIG_LCD_NOSTDOUT
#define CONFIG_SYS_WHITE_ON_BLACK
#define LCD_BPP LCD_COLOR16
#To see all the files in your boot partition run
=> ls mmc 0
#define CONFIG_VIDEO_BMP_GZIP
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (1366*767*4)
#define CONFIG_CMD_UNZIP
#define CONFIG_CMD_BMP
#define CONFIG_BMP_16BPP
#endif
#To load image
=> fatload mmc 0 $loadaddr ti_logo_414x97_32bpp.bmp.gz
In arch/arm/cpu/armv7/am33xx/clock\_am33xx.c enable the LCDC clocks.
#To display image
=> bmp display $loadaddr m m
::
The above command will display an image at the centre of the screen as below

&cmrtc->rtcclkctrl,
&cmper->usb0clkctrl,
&cmper->emiffwclkctrl,
&cmper->emifclkctrl,
&cmper->lcdclkctrl,
&cmper->lcdcclkstctrl,
&cmper->epwmss2clkctrl,
0
.. Image:: /images/AM335x_evm_uboot_splash_screen.jpg
:width: 600

In board.c add includes for mmc, fat, lcd, and the frame buffer.
User can use the custom image to display the splash screen.

::
.. code-block:: console
#include <libfdt.h>
#include <fdt_support.h>
#include <mmc.h>
#include <fat.h>
#include <lcd.h>
#include <../../../drivers/video/am335x-fb.h>

This example code is based on the AM335x Starter Kit. A GPIO controls
the backlight so use GPIO\_TO\_PIN to define the GPIO.

::

#define GPIO_ETH1_MODE GPIO_TO_PIN(1, 26)

/* GPIO that controls backlight on EVM-SK */
#define GPIO_BACKLIGHT_EN GPIO_TO_PIN(3, 17)

In board\_late\_init call the splash screen routine.

::

#if !defined(CONFIG_SPL_BUILD)
splash_screen();
/* try reading mac address from efuse */
mac_lo = readl(&cdev->macid0l);
mac_hi = readl(&cdev->macid0h);

The following routines enable the backlight, load the LCD timings (this
example is based on Starter Kit), power on the LCD and enable it, then
finally the splash screen code that registers a fat file system on mmc0.
The gzipped bitmap is named splash.bmp.gz and is displayed with
bmp\_display.

.. code-block:: text
#if defined(CONFIG_LCD) && defined(CONFIG_AM335X_LCD) && \
 !defined(CONFIG_SPL_BUILD)
void lcdbacklight(int on)
{
gpio_request(GPIO_BACKLIGHT_EN, "backlight_en");
if (on)
gpio_direction_output(GPIO_BACKLIGHT_EN, 0);
else
gpio_direction_output(GPIO_BACKLIGHT_EN, 1);
}
int load_lcdtiming(struct am335x_lcdpanel *panel)
{
struct am335x_lcdpanel pnltmp;
pnltmp.hactive = 480;
pnltmp.vactive = 272;
pnltmp.bpp = 16;
pnltmp.hfp = 8;
pnltmp.hbp = 43;
pnltmp.hsw = 4;
pnltmp.vfp = 4;
pnltmp.vbp = 12;
pnltmp.vsw = 10;
pnltmp.pxl_clk_div = 2;
pnltmp.pol = 0;
pnltmp.pup_delay = 1;
pnltmp.pon_delay = 1;
panel_info.vl_rot = 0;
memcpy((void *)panel, (void *)&pnltmp, sizeof(struct am335x_lcdpanel));
return 0;
}
void lcdpower(int on)
{
lcd_enable();
}
vidinfo_t panel_info = {
.vl_col = 480,
.vl_row = 272,
.vl_bpix = 4,
.priv = 0
};
void lcd_ctrl_init(void *lcdbase)
{
struct am335x_lcdpanel lcd_panel;
memset(&lcd_panel, 0, sizeof(struct am335x_lcdpanel));
if (load_lcdtiming(&lcd_panel) != 0)
return;
lcd_panel.panel_power_ctrl = &lcdpower;
if (am335xfb_init(&lcd_panel) != 0)
printf("ERROR: failed to initialize video!");
/* Modify panel into to real resolution */
panel_info.vl_col = lcd_panel.hactive;
panel_info.vl_row = lcd_panel.vactive;
// lcd_set_flush_dcache(1);
}
void lcd_enable(void)
{
lcdbacklight(1);
}
void splash_screen(void)
{
struct mmc *mmc = NULL;
int err;
mmc = find_mmc_device(0);
if (!mmc)
printf("Error finding mmc device\n");
mmc_init(mmc);
err = fat_register_device(&mmc->block_dev,
CONFIG_SYS_MMCSD_FS_BOOT_PARTITION);
if (!err) {
err = file_fat_read("splash.bmp.gz", (void *)0x82000000, 0);
bmp_display(0x82000000, 0, 0);
}
}
#endif
In mux.c define the LCDC pin mux.

::

#ifdef CONFIG_AM335X_LCD
static struct module_pin_mux lcd_pin_mux[] = {
{OFFSET(lcd_data0), (MODE(0) | PULLUDDIS)}, /* LCD-Data(0) */
{OFFSET(lcd_data1), (MODE(0) | PULLUDDIS)}, /* LCD-Data(1) */
{OFFSET(lcd_data2), (MODE(0) | PULLUDDIS)}, /* LCD-Data(2) */
{OFFSET(lcd_data3), (MODE(0) | PULLUDDIS)}, /* LCD-Data(3) */
{OFFSET(lcd_data4), (MODE(0) | PULLUDDIS)}, /* LCD-Data(4) */
{OFFSET(lcd_data5), (MODE(0) | PULLUDDIS)}, /* LCD-Data(5) */
{OFFSET(lcd_data6), (MODE(0) | PULLUDDIS)}, /* LCD-Data(6) */
{OFFSET(lcd_data7), (MODE(0) | PULLUDDIS)}, /* LCD-Data(7) */
{OFFSET(lcd_data8), (MODE(0) | PULLUDDIS)}, /* LCD-Data(8) */
{OFFSET(lcd_data9), (MODE(0) | PULLUDDIS)}, /* LCD-Data(9) */
{OFFSET(lcd_data10), (MODE(0) | PULLUDDIS)}, /* LCD-Data(10) */
{OFFSET(lcd_data11), (MODE(0) | PULLUDDIS)}, /* LCD-Data(11) */
{OFFSET(lcd_data12), (MODE(0) | PULLUDDIS)}, /* LCD-Data(12) */
{OFFSET(lcd_data13), (MODE(0) | PULLUDDIS)}, /* LCD-Data(13) */
{OFFSET(lcd_data14), (MODE(0) | PULLUDDIS)}, /* LCD-Data(14) */
{OFFSET(lcd_data15), (MODE(0) | PULLUDDIS)}, /* LCD-Data(15) */
{OFFSET(gpmc_ad8), (MODE(1) | PULLUDDIS)}, /* LCD-Data(16) */
{OFFSET(gpmc_ad9), (MODE(1) | PULLUDDIS)}, /* LCD-Data(17) */
{OFFSET(gpmc_ad10), (MODE(1) | PULLUDDIS)}, /* LCD-Data(18) */
{OFFSET(gpmc_ad11), (MODE(1) | PULLUDDIS)}, /* LCD-Data(19) */
{OFFSET(gpmc_ad12), (MODE(1) | PULLUDDIS)}, /* LCD-Data(20) */
{OFFSET(gpmc_ad13), (MODE(1) | PULLUDDIS)}, /* LCD-Data(21) */
{OFFSET(gpmc_ad14), (MODE(1) | PULLUDDIS)}, /* LCD-Data(22) */
{OFFSET(gpmc_ad15), (MODE(1) | PULLUDDIS)}, /* LCD-Data(23) */
{OFFSET(lcd_vsync), (MODE(0) | PULLUDDIS)}, /* LCD-VSync */
{OFFSET(lcd_hsync), (MODE(0) | PULLUDDIS)}, /* LCD-HSync */
{OFFSET(lcd_ac_bias_en), (MODE(0) | PULLUDDIS)},/* LCD-DE */
{OFFSET(lcd_pclk), (MODE(0) | PULLUDDIS)}, /* LCD-CLK */

/* backlight */
{OFFSET(mcasp0_ahclkr), (MODE(7) | PULLUDDIS)}, /* mcasp0_gpio */

{-1},
};
#endif

And enable the LCD.

::

} else if (board_is_evm_sk()) {
/* Starter Kit EVM */
configure_module_pin_mux(i2c1_pin_mux);
configure_module_pin_mux(gpio0_7_pin_mux);
configure_module_pin_mux(rgmii1_pin_mux);
configure_module_pin_mux(mmc0_pin_mux_sk_evm);
#ifdef CONFIG_AM335X_LCD
configure_module_pin_mux(lcd_pin_mux);
#endif
} else if (board_is_bone_lt()) {
#To get the BMP image info
=> bmp info

0 comments on commit 0cbc0f5

Please sign in to comment.