sm6150.mk

###########
#QMAA flags starts
###########
#QMAA global flag for modular architecture
#true means QMAA is enabled for system
#false means QMAA is disabled for system

TARGET_USES_QMAA := true
#QMAA tech team flag to override global QMAA per tech team
#true means overriding global QMAA for this tech area
#false means using global, no override
TARGET_USES_QMAA_OVERRIDE_RPMB    := true
TARGET_USES_QMAA_OVERRIDE_DISPLAY := true
TARGET_USES_QMAA_OVERRIDE_AUDIO   := true
TARGET_USES_QMAA_OVERRIDE_VIDEO   := false
TARGET_USES_QMAA_OVERRIDE_CAMERA  := true
TARGET_USES_QMAA_OVERRIDE_GFX     := true
TARGET_USES_QMAA_OVERRIDE_WFD     := true
TARGET_USES_QMAA_OVERRIDE_GPS     := true
TARGET_USES_QMAA_OVERRIDE_ANDROID_RECOVERY := true
TARGET_USES_QMAA_OVERRIDE_ANDROID_CORE := true
TARGET_USES_QMAA_OVERRIDE_WLAN    := true
TARGET_USES_QMAA_OVERRIDE_DPM     := true
TARGET_USES_QMAA_OVERRIDE_BLUETOOTH := true
TARGET_USES_QMAA_OVERRIDE_FM      := true
TARGET_USES_QMAA_OVERRIDE_CVP     := false
TARGET_USES_QMAA_OVERRIDE_FASTCV  := false
TARGET_USES_QMAA_OVERRIDE_SCVE    := false
TARGET_USES_QMAA_OVERRIDE_OPENVX  := false
TARGET_USES_QMAA_OVERRIDE_DIAG    := true
TARGET_USES_QMAA_OVERRIDE_FTM     := false
TARGET_USES_QMAA_OVERRIDE_DATA    := true
TARGET_USES_QMAA_OVERRIDE_DATA_NET := true
TARGET_USES_QMAA_OVERRIDE_MSM_BUS_MODULE := true
TARGET_USES_QMAA_OVERRIDE_KERNEL_TESTS_INTERNAL := true
TARGET_USES_QMAA_OVERRIDE_MSMIRQBALANCE := false
TARGET_USES_QMAA_OVERRIDE_VIBRATOR := true
TARGET_USES_QMAA_OVERRIDE_DRM     := true
TARGET_USES_QMAA_OVERRIDE_KMGK    := false
TARGET_USES_QMAA_OVERRIDE_CRYPTFSHW := true
TARGET_USES_QMAA_OVERRIDE_VPP     := false
TARGET_USES_QMAA_OVERRIDE_GP      := false
TARGET_USES_QMAA_OVERRIDE_SPCOM_UTEST := false
TARGET_USES_QMAA_OVERRIDE_PERF    := true
TARGET_USES_QMAA_OVERRIDE_SENSORS := true
TARGET_USES_QMAA_OVERRIDE_SMCINVOKE := true

#Full QMAA HAL List
QMAA_HAL_LIST :=

###########
#QMAA flags ends

# Default A/B configuration.
ENABLE_AB ?= true

# For QSSI builds, we skip building the system image. Instead we build the
# "non-system" images (that we support).
PRODUCT_BUILD_SYSTEM_IMAGE := true
PRODUCT_BUILD_SYSTEM_OTHER_IMAGE := false
PRODUCT_BUILD_SYSTEM_EXT_IMAGE := true
PRODUCT_BUILD_VENDOR_IMAGE := true
PRODUCT_BUILD_PRODUCT_IMAGE := true
#PRODUCT_BUILD_PRODUCT_SERVICES_IMAGE := false
PRODUCT_BUILD_ODM_IMAGE := false
ifeq ($(ENABLE_AB), true)
PRODUCT_BUILD_CACHE_IMAGE := false
else
PRODUCT_BUILD_CACHE_IMAGE := true
endif
PRODUCT_BUILD_RAMDISK_IMAGE := true
PRODUCT_BUILD_USERDATA_IMAGE := true

# Enable debugfs restrictions
PRODUCT_SET_DEBUGFS_RESTRICTIONS := true

# Also, since we're going to skip building the system image, we also skip
# building the OTA package. We'll build this at a later step. We also don't
# need to build the OTA tools package (we'll use the one from the system build).
TARGET_SKIP_OTA_PACKAGE := true
TARGET_SKIP_OTATOOLS_PACKAGE := true

# Enable AVB 2.0
BOARD_AVB_ENABLE := true

# By default this target is ota config, so set the default shipping level to 31 (if not set explictly earlier)
SHIPPING_API_LEVEL := 31
PRODUCT_SHIPPING_API_LEVEL := 31

# Enable virtual-ab by default
ENABLE_VIRTUAL_AB := true

# Enable Dynamic partitions only for Q new launch devices.
ifeq (true,$(call math_gt_or_eq,$(SHIPPING_API_LEVEL),29))
  BOARD_DYNAMIC_PARTITION_ENABLE := true
  PRODUCT_SHIPPING_API_LEVEL := $(SHIPPING_API_LEVEL)
else ifeq ($(SHIPPING_API_LEVEL),28)
  BOARD_DYNAMIC_PARTITION_ENABLE := false
  $(call inherit-product, build/make/target/product/product_launched_with_p.mk)
endif

ifeq (true,$(call math_gt_or_eq,$(SHIPPING_API_LEVEL),29))
 # f2fs utilities
 PRODUCT_PACKAGES += \
     sg_write_buffer \
     f2fs_io \
     check_f2fs

 # Userdata checkpoint
 PRODUCT_PACKAGES += \
     checkpoint_gc

 ifeq ($(ENABLE_AB), true)
  AB_OTA_POSTINSTALL_CONFIG += \
      RUN_POSTINSTALL_vendor=true \
      POSTINSTALL_PATH_vendor=bin/checkpoint_gc \
      FILESYSTEM_TYPE_vendor=ext4 \
      POSTINSTALL_OPTIONAL_vendor=true
 endif
endif

PRODUCT_COPY_FILES += \
    device/qcom/sm6150/init.qti.qseecomd.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.qti.qseecomd.sh

ifeq ($(ENABLE_VIRTUAL_AB), true)
    $(call inherit-product, $(SRC_TARGET_DIR)/product/virtual_ab_ota.mk)
endif

$(call inherit-product, $(SRC_TARGET_DIR)/product/emulated_storage.mk)

ifneq ($(strip $(BOARD_DYNAMIC_PARTITION_ENABLE)),true)
# Enable chain partition for system, to facilitate system-only OTA in Treble.
BOARD_AVB_SYSTEM_KEY_PATH := external/avb/test/data/testkey_rsa2048.pem
BOARD_AVB_SYSTEM_ALGORITHM := SHA256_RSA2048
BOARD_AVB_SYSTEM_ROLLBACK_INDEX := 0
BOARD_AVB_SYSTEM_ROLLBACK_INDEX_LOCATION := 2
else
PRODUCT_USE_DYNAMIC_PARTITIONS := true
BOARD_BUILD_SUPER_IMAGE_BY_DEFAULT := true
PRODUCT_BUILD_SUPER_PARTITION := true
PRODUCT_PACKAGES += fastbootd

# Mismatch in the uses-library tags between build system and the manifest leads
# to soong APK manifest_check tool errors. Enable the flag to fix this.
RELAX_USES_LIBRARY_CHECK := true
ifeq ($(ENABLE_AB), true)
PRODUCT_COPY_FILES += $(LOCAL_PATH)/default/fstab_AB_dynamic_partition.qti:$(TARGET_COPY_OUT_RAMDISK)/fstab.default
PRODUCT_COPY_FILES += $(LOCAL_PATH)/emmc/fstab_AB_dynamic_partition.qti:$(TARGET_COPY_OUT_RAMDISK)/fstab.emmc
else
PRODUCT_COPY_FILES += $(LOCAL_PATH)/default/fstab_non_AB_dynamic_partition.qti:$(TARGET_COPY_OUT_RAMDISK)/fstab.default
PRODUCT_COPY_FILES += $(LOCAL_PATH)/emmc/fstab_non_AB_dynamic_partition.qti:$(TARGET_COPY_OUT_RAMDISK)/fstab.emmc
endif
#BOARD_AVB_VBMETA_SYSTEM := system
BOARD_AVB_VBMETA_SYSTEM := system system_ext product
BOARD_AVB_VBMETA_SYSTEM_KEY_PATH := external/avb/test/data/testkey_rsa2048.pem
BOARD_AVB_VBMETA_SYSTEM_ALGORITHM := SHA256_RSA2048
BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX := $(PLATFORM_SECURITY_PATCH_TIMESTAMP)
BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX_LOCATION := 2
endif

# privapp-permissions whitelisting (To Fix CTS :privappPermissionsMustBeEnforced)
PRODUCT_PROPERTY_OVERRIDES += ro.control_privapp_permissions=enforce

#target name, shall be used in all makefiles
MSMSTEPPE = sm6150
TARGET_DEFINES_DALVIK_HEAP := true
$(call inherit-product, device/qcom/common/common64.mk)

#Inherit all except heap growth limit from phone-xhdpi-2048-dalvik-heap.mk
PRODUCT_PROPERTY_OVERRIDES  += \
        dalvik.vm.heapstartsize=8m \
        dalvik.vm.heapsize=512m \
        dalvik.vm.heaptargetutilization=0.75 \
        dalvik.vm.heapminfree=512k \
        dalvik.vm.heapmaxfree=8m
PRODUCT_NAME := $(MSMSTEPPE)
PRODUCT_DEVICE := $(MSMSTEPPE)
PRODUCT_BRAND := qti
PRODUCT_MODEL := $(MSMSTEPPE) for arm64

#Initial bringup flags
TARGET_USES_AOSP := false
TARGET_USES_QCOM_BSP := false
TARGET_USES_QTIC := false
TARGET_USES_QTIC_EXTENSION := false
ENABLE_HYP := false
BOARD_HAS_QCOM_WLAN := true
TARGET_NO_QTI_WFD := true
BOARD_HAVE_QCOM_FM := true
BOARD_VENDOR_QCOM_LOC_PDK_FEATURE_SET := false
TARGET_USES_AOSP_FOR_WLAN := false
ALLOW_MISSING_DEPENDENCIES := true
BOARD_USES_DPM := true

ifeq ($(TARGET_FWK_SUPPORTS_FULL_VALUEADDS),true)
  $(warning "Compiling with full value-added framework")
else
  $(warning "Compiling without full value-added framework - enabling GENERIC_ODM_IMAGE")
  GENERIC_ODM_IMAGE := true
endif

#Default vendor image configuration
ifeq ($(ENABLE_VENDOR_IMAGE),)
ENABLE_VENDOR_IMAGE := false
endif

TARGET_KERNEL_VERSION := 5.4
TARGET_HAS_GENERIC_KERNEL_HEADERS := true

#Enable llvm support for kernel
KERNEL_LLVM_SUPPORT := true

#Enable sd-llvm suppport for kernel
KERNEL_SD_LLVM_SUPPORT := false

# default is nosdcard, S/W button enabled in resource
PRODUCT_CHARACTERISTICS := nosdcard
BOARD_FRP_PARTITION_NAME := frp

# Kernel modules install path
KERNEL_MODULES_INSTALL := dlkm
KERNEL_MODULES_OUT := out/target/product/$(PRODUCT_NAME)/$(KERNEL_MODULES_INSTALL)/lib/modules


#Android EGL implementation
PRODUCT_PACKAGES += libGLES_android

-include $(QCPATH)/common/config/qtic-config.mk


PRODUCT_BOOT_JARS += tcmiface
PRODUCT_BOOT_JARS += telephony-ext
PRODUCT_PACKAGES += telephony-ext

TARGET_ENABLE_QC_AV_ENHANCEMENTS := true

TARGET_DISABLE_QTI_VPP := true

PRODUCT_PACKAGES += android.hardware.media.omx@1.0-impl

# Audio configuration file
TARGET_USES_AOSP_FOR_AUDIO := false
ifeq ($(TARGET_USES_QMAA_OVERRIDE_AUDIO), false)
ifeq ($(TARGET_USES_QMAA),true)
AUDIO_USE_STUB_HAL := true
TARGET_USES_AOSP_FOR_AUDIO := true
-include $(TOPDIR)vendor/qcom/opensource/audio-hal/primary-hal/configs/common/default.mk
# enable sound trigger hidl hal 2.1
PRODUCT_PACKAGES += \
    android.hardware.soundtrigger@2.1-impl
else
# Audio hal configuration file
-include $(TOPDIR)vendor/qcom/opensource/audio-hal/primary-hal/configs/msmsteppe/msmsteppe.mk
endif
else
# Audio hal configuration file
-include $(TOPDIR)vendor/qcom/opensource/audio-hal/primary-hal/configs/msmsteppe/msmsteppe.mk
endif

PRODUCT_PACKAGES += fs_config_files

ifeq ($(ENABLE_AB), true)
#A/B related packages
PRODUCT_PACKAGES += update_engine \
    update_engine_client \
    update_verifier \
    bootctrl.$(MSMSTEPPE) \
    android.hardware.boot@1.1-impl-qti \
    android.hardware.boot@1.1-impl-qti.recovery \
    android.hardware.boot@1.1-service

#Boot control HAL test app
PRODUCT_PACKAGES_DEBUG += bootctl

PRODUCT_PACKAGES += \
  update_engine_sideload
endif

DEVICE_MANIFEST_FILE := device/qcom/$(MSMSTEPPE)/manifest.xml
DEVICE_MATRIX_FILE := device/qcom/common/compatibility_matrix.xml
DEVICE_FRAMEWORK_MANIFEST_FILE := device/qcom/$(MSMSTEPPE)/framework_manifest.xml
DEVICE_FRAMEWORK_COMPATIBILITY_MATRIX_FILE += \
    vendor/qcom/opensource/core-utils/vendor_framework_compatibility_matrix.xml

#Healthd packages
PRODUCT_PACKAGES += \
    libhealthd.msm

#audio related module
PRODUCT_PACKAGES += libvolumelistener

PRODUCT_PACKAGES += \
    android.hardware.broadcastradio@1.0-impl

PRODUCT_HOST_PACKAGES += \
    brillo_update_payload \
    configstore_xmlparser

# MSM IRQ Balancer configuration file
PRODUCT_COPY_FILES += device/qcom/$(MSMSTEPPE)/msm_irqbalance.conf:$(TARGET_COPY_OUT_VENDOR)/etc/msm_irqbalance.conf

# Camera configuration file. Shared by passthrough/binderized camera HAL
PRODUCT_PACKAGES += camera.device@3.2-impl
PRODUCT_PACKAGES += camera.device@1.0-impl
PRODUCT_PACKAGES += android.hardware.camera.provider@2.4-impl
# Enable binderized camera HAL
PRODUCT_PACKAGES += android.hardware.camera.provider@2.4-service_64

# MIDI feature
PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/android.software.midi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.midi.xml

PRODUCT_RESTRICT_VENDOR_FILES := false

# Kernel modules install path
KERNEL_MODULES_INSTALL := dlkm
KERNEL_MODULES_OUT := out/target/product/$(PRODUCT_NAME)/$(KERNEL_MODULES_INSTALL)/lib/modules

#FEATURE_OPENGLES_EXTENSION_PACK support string config file
PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/android.hardware.opengles.aep.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.opengles.aep.xml

# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
# 196609 is decimal for 0x30001 to report version 3.1
# 196610 is decimal for 0x30002 to report version 3.2
PRODUCT_PROPERTY_OVERRIDES  += \
    ro.opengles.version=196610

#vendor prop to enable advanced network scanning
PRODUCT_PROPERTY_OVERRIDES += \
    persist.vendor.radio.enableadvancedscan=true

# Property to disable ZSL mode
PRODUCT_PROPERTY_OVERRIDES += \
    camera.disable_zsl_mode=1

#Enable full treble flag
PRODUCT_FULL_TREBLE_OVERRIDE := true
PRODUCT_VENDOR_MOVE_ENABLED := true

# Enable flag to support slow devices
TARGET_PRESIL_SLOW_BOARD := true

#add vndservicemanager
PRODUCT_PACKAGES += vndservicemanager

#----------------------------------------------------------------------
# wlan specific
#----------------------------------------------------------------------
include device/qcom/wlan/talos/wlan.mk

# dm-verity definitions
ifneq ($(BOARD_AVB_ENABLE), true)
 PRODUCT_SUPPORTS_VERITY := true
endif

# Enable vndk-sp Librarie
PRODUCT_PACKAGES += vndk_package

PRODUCT_PACKAGES += init.qti.dcvs.sh

PRODUCT_COMPATIBLE_PROPERTY_OVERRIDE:=true
TARGET_MOUNT_POINTS_SYMLINKS := false

PRODUCT_PROPERTY_OVERRIDES += \
			ro.crypto.volume.filenames_mode = "aes-256-cts"

# Enable incremental FS feature
PRODUCT_PROPERTY_OVERRIDES += ro.incremental.enable=1

ifneq ($(GENERIC_ODM_IMAGE),true)
   ODM_MANIFEST_FILES += device/qcom/$(MSMSTEPPE)/manifest-qva.xml
else
   ODM_MANIFEST_FILES += device/qcom/$(MSMSTEPPE)/manifest-generic.xml
endif

PRODUCT_PACKAGES += android.hardware.health@2.1-service \
		android.hardware.health@2.1-impl

###################################################################################
# This is the End of target.mk file.
# Now, Pickup other split product.mk files:
###################################################################################
# TODO: Relocate the system product.mk files pickup into qssi lunch, once it is up.
$(call inherit-product-if-exists, vendor/qcom/defs/product-defs/system/*.mk)
$(call inherit-product-if-exists, vendor/qcom/defs/product-defs/vendor/*.mk)
###################################################################################