Skip to content

Latest commit

 

History

History
117 lines (97 loc) · 4.79 KB

cortexm.md

File metadata and controls

117 lines (97 loc) · 4.79 KB
Raw

Use the Firmware examples for the Cortex M4 or Cortex M33

Applicable platforms: STM32MP157-DK1, STM32MP157-DK2, STM32MP257-EV1

The different platforms have different Cortex M family coprocessor:

  • STM32MP157-DK1 and STM32MP157-DK2: Cortex M4
  • STM32MP257-EV1: Cortex M33

The Firmware examples for the CM4 from STM32CubeMP1 or the CM33 from STM32CubeMP2 are enabled in the demo configuration. All examples built are installed in the path /usr/lib/Cube-M4-examples/ or /usr/lib/Cube-M33-examples/

Cortex M4

We will use the GPIO_EXTI application for the example as it is easy to test.

# cd /usr/lib/Cube-M4-examples/GPIO_EXTI/
# ./fw_cortex_m4.sh start
fw_cortex_m4.sh: fmw_name=GPIO_EXTI.elf
[  284.342266] remoteproc remoteproc0: powering up m4
[  284.346258] remoteproc remoteproc0: Booting fw image GPIO_EXTI.elf, size
197496
[  284.353331] remoteproc remoteproc0: header-less resource table
[  284.358929] remoteproc remoteproc0: no resource table found for this
firmware
[  284.366048] remoteproc remoteproc0: header-less resource table
[  284.371881] remoteproc remoteproc0: remote processor m4 is now up

This run the GPIO_EXTI example on the Cortex M4 processor. Test the behavior of the CM4 application by Pushing the USER1 button to toggle the state of the LED7.

# ./fw_cortex_m4.sh stop
fw_cortex_m4.sh: fmw_name=GPIO_EXTI.elf
[  293.167161] remoteproc remoteproc0: warning: remote FW shutdown without
ack
[  293.172769] remoteproc remoteproc0: stopped remote processor m4

To stop the example running on the M4 processor.

Cortex M33

We will use the USBPD_DRP_UCSI application for the example as it is the one used in OpenST distribution.

# /usr/lib/Cube-M33-examples/USBPD_DRP_UCSI/fw_cortex_m33.sh start
fw_cortex_m33.sh: fmw_name=USBPD_DRP_UCSI_CM33_NonSecure_sign.bin
[   18.436576] remoteproc remoteproc0: powering up m33
[   18.554765] remoteproc remoteproc0: Booting fw image USBPD_DRP_UCSI_CM33_NonSecure_sign.bin, size 153148
[   18.559710] rproc-virtio rproc-virtio.1.auto: assigned reserved memory node vdev0buffer@812fa000
[   18.568169] virtio_rpmsg_bus virtio0: rpmsg host is online
[   18.573088] rproc-virtio rproc-virtio.1.auto: registered virtio0 (type 7)
[   18.579978] remoteproc remoteproc0: remote processor m33 is now up
[   19.267503] virtio_rpmsg_bus virtio0: creating channel rpmsg-intc addr 0x400
[   19.277735] virtio_rpmsg_bus virtio0: creating channel rpmsg_i2c addr 0x401
[   19.279321] rpmsg_i2c virtio0.rpmsg_i2c.-1.1025: new channel: 0x401 -> 0x401!

This run the USBPD_DRP_UCSI example on the Cortex M33 processor which emulate a stm32mp25-typec usb role switch to detect if the USB-C CN15 is plugged as a device or a host.

# /usr/lib/Cube-M33-examples/USBPD_DRP_UCSI/fw_cortex_m33.sh -t ns_s start
fw_cortex_m33.sh: fmw_name=USBPD_DRP_UCSI_CM33_NonSecure_tfm_sign.bin
[   46.067010] remoteproc remoteproc0: powering up m33
[   46.197826] remoteproc remoteproc0: Booting fw image USBPD_DRP_UCSI_CM33_NonSecure_tfm_sign.bin, size 286164
[   46.203151] rproc-virtio rproc-virtio.1.auto: assigned reserved memory node vdev0buffer@812fa000
[   46.211593] virtio_rpmsg_bus virtio0: rpmsg host is online
[   46.216540] rproc-virtio rproc-virtio.1.auto: registered virtio0 (type 7)
[   46.223546] remoteproc remoteproc0: remote processor m33 is now up
[   47.105247] virtio_rpmsg_bus virtio0: creating channel rpmsg-intc addr 0x400
[   47.115483] virtio_rpmsg_bus virtio0: creating channel rpmsg_i2c addr 0x401
[   47.117061] rpmsg_i2c virtio0.rpmsg_i2c.-1.1025: new channel: 0x401 -> 0x401!

You can also use the above command to run the firmware containing TrustedFirmware-M and the USBPD_DRP_UCSI example.

# stm32_usbotg_eth_config.sh start
Start usb gadget
[   35.933516] using random self ethernet address
[   35.933578] using random host ethernet address
[   35.963935] usb0: HOST MAC ec:16:02:e2:af:1a
[   35.963998] usb0: MAC f6:87:0a:a3:dc:96
# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
...
6: usb0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
    link/ether f6:87:0a:a3:dc:96 brd ff:ff:ff:ff:ff:ff

Test the behavior of the CM33 application by running stm32_usbotg_eth_config.sh script which will configure USB configfs to have the USB-C as a USB rndis gadget. If you plug the USB-C to your computer you will see a new network interface.

# stm32_usbotg_eth_config.sh stop
Stop usb gadget
# /usr/lib/Cube-M33-examples/USBPD_DRP_UCSI/fw_cortex_m33.sh stop
[  687.531875] ucsi-stm32g0-i2c 1-0035: i2c write 35, 08 error: -110
[  687.728373] remoteproc remoteproc0: stopped remote processor m33

To stop the example running on the M33 processor.