diff --git a/doc/stratum-v2.md b/doc/stratum-v2.md
new file mode 100644
index 0000000000000..a66bff610d9cf
--- /dev/null
+++ b/doc/stratum-v2.md
@@ -0,0 +1,379 @@
+# Stratum v2
+
+## Design
+
+The Stratum v2 protocol specification can be found here: https://github.com/stratum-mining/sv2-spec
+
+Bitcoin Core performs the Template Provider role, and for that it implements the
+Template Distribution Protocol. When launched with `-sv2` we listen for connections
+from Job Declarator clients.
+
+A Job Declarator client might run on the same machine, e.g. for a single ASIC
+hobby miner. In a more advanced setup it might run on another machine, on the same
+local network or remote. A third possible use case is where a miner relies on a
+node run by someone else to provide the templates. Trust may not go both ways in
+that scenario, see the section on DoS.
+
+We send them a new block template whenenver out tip is updated, or when mempool
+fees have increased sufficiently. If the pool finds a block, we attempt to
+broadcast it based on a cached template.
+
+Communication with other roles uses the Noise Protocol, which has been implemented
+to the extend necessary. Its cryptographic primitives were chosen so that they
+were already present in the  Bitcoin Core project at the time of writing the spec.
+
+### Advantage over getblocktemplate RPC
+
+Although under the hood the Template Provider uses `CreateNewBlock()` just like
+the `getblocktemplate` RPC, there's a number of advantages in running a
+server with a stateful connection, and avoiding JSON RPC in general.
+
+1. Stateful, so we can have back-and-forth, e.g. requesting transaction data,
+   processing a block solution.
+2. Less (de)serializing and data sent over the wire, compared to plain text JSON
+3. Encrypted, safer (for now: less unsafe) to expose on the public internet
+4. Push based: new template is sent immediately when a new block is found rather
+   than at the next poll interval. Combined with Cluster Mempool this can
+   hopefully be done for higher fee templates too.
+5. Low friction deployment with other Stratum v2 software / devices
+
+### Message flow(s)
+
+See the [Message Types](https://github.com/stratum-mining/sv2-spec/blob/main/08-Message-Types.md)
+and [Protocol Overview](https://github.com/stratum-mining/sv2-spec/blob/main/03-Protocol-Overview.md)
+section of the spec for all messages and their details.
+
+When a Job Declarator client connects to us, it first sends a  `SetupConnection`
+message. We reply with `SetupConnection.Success` unless something went wrong,
+e.g. version mismatch, in which case we reply with `SetupConnection.Error`.
+
+Next the client sends us their `CoinbaseOutputDataSize`. If this is invalid we
+disconnect. Otherwise we start the cycle below that repeats with every block.
+
+We send a `NewTemplate` message with `future_template` set `true`, immedidately
+followed by `SetNewPrevHash`. We _don't_ send any transaction information
+at this point. The Job Declarator client uses this to announce upstream that
+it wants to declare a new template.
+
+In the simplest setup with SRI the Job Declarator client doubles as a proxy and
+sends these two messages to all connected mining devices. They will keep
+working on their previous job until the `SetNewPrevHash` message arrives.
+Future implementations could provide an empty or speculative template before
+a new block is found.
+
+Meanwhile the pool will request, via the Job Declarator client, the transaction
+lists belonging to the template: `RequestTransactionData`. In case of a problem
+we reply with `RequestTransactionData.Error`. Otherwise we reply with the full[0]
+transaction data in `RequestTransactionData.Success`.
+
+When we find a template with higher fees, we send a `NewTemplate` message
+with `future_template` set to `false`. This is _not_ followed by `SetNewPrevHash`.
+
+Finally, if we find an actual block, the client sends us `SubmitSolution`.
+We then lookup the template (may not be the most recent one), reconstruct
+the block and broadcast it. The pool will do the same.
+
+`[0]`: When the Job Declarator client communicates with the Job Declarator
+server there is an intermediate message which sends short transaction ids
+first, followed by a `ProvideMissingTransactions` message. The spec could be
+modified to introduce a similar message here. This is especially useful when
+the Template Provider runs on a different machine than the Job Declarator
+client. Erlay might be useful here too, in a later stage.
+
+### Noise Protocol
+
+As detailed in the [Protocol Security](https://github.com/stratum-mining/sv2-spec/blob/main/04-Protocol-Security.md)
+section of the spec, Stratum v2 roles use the Noise Protocol to communicate.
+
+We only implement the parts needed for inbound connections, although not much
+code would be needed to support outbound connections as well if this is required later.
+
+The spec was written before BIP 324 peer-to-peer encryption was introduced. It
+has much in common with Noise, but for the purposes of Stratum v2 it currently
+lacks authentication. Perhaps a future version of Stratum will use this. Since
+we only communicate with the Job Declarator role, a transition to BIP 324 would
+not require waiting for the entire mining ecosystem to adopt it.
+
+An alternative to implementing the Noise Protocol in Bitcoin Core is to use a
+unix socket instead and rely on the user to install a separate tool to convert
+to this protocol. Such a tool could be provided by developers of the Job
+Declarator client.
+
+ZMQ may be slightly more convenient than a unix socket. Since the Stratum v2
+protocol is stateful we would need to use the [request-reply](https://zguide.zeromq.org/docs/chapter3/)
+mode. Currently we only use the unidirectional `ZMQ_PUB` mode, see
+[zmq_socket](http://api.zeromq.org/4-2:zmq-socket). But then Stratum v2 messages
+can be sent and received without dealing with low level sockets / buffers / bytes.
+This could be implemented as a ZmqTransport subclass of Transport. Whether this
+involves less new code than the Noise Protocol remains to be seen.
+
+### Mempool monitoring
+
+The current design calls `CreateNewBlock()` internally every `-sv2interval` seconds.
+We then broadcast the resulting block template if fees have increased enough to make
+it worth the overhead (`-sv2feedelta`). A pool may have additional rate limiting in
+place.
+
+This is better than the Stratum v1 model of a polling call to the `getblocktemplate` RPC.
+It avoids (de)serializing JSON, uses an encrypted connection and only sends data
+over the wire if fees increased.
+
+But it's still a poll based model, as opposed to the push based approach
+whenever a new block arrives. It would be better if a new template is generated
+as soon as a potentially revenue-increasing transaction is added to the mempool.
+The Cluster Mempool project might enable that.
+
+### DoS and privacy
+
+The current Template Provider should not be run on the public internet with
+unlimited access. It is not harneded against DoS attacks, nor against mempool probing.
+
+There's currently no limit to the number of Job Declarator clients that can connect,
+which could exhaust memory. There's also no limit to the amount of raw transaction
+data that can be requested.
+
+Templates reveal what is in the mempool without any delay or randomization.
+
+This is why the use of `-sv2allowip` is required when `-sv2bind` is set to
+anything other than localhost on mainnet.
+
+Future improvements should aim to reduce or eliminate the above concerns such
+that any node can run a Template Provider as a public service.
+
+## Usage
+
+Using this in a production environment is not yet recommended, but see the testing guide below.
+
+### Build
+
+Follow the instructions in [build-unix.md](build-unix.md), [build-osx.md](build-osx.md),
+etc, but add `-DWITH_SV2=ON` to `cmake -B build`.
+
+### Parameters
+
+See also `bitcoind --help`.
+
+Start Bitcoin Core with `-sv2` to start a Template Provider server with default settings.
+The listening port can be changed with `-sv2port`.
+
+By default it only accepts connections from localhost. This can be changed
+using `-sv2bind`, which requires the use of `-sv2allowip`. See DoS and Privacy below.
+
+Use `-debug=sv2` to see Stratum v2 related log messages. Set `-loglevel=sv2:trace`
+to see which messages are exchanged with the Job Declarator client.
+
+The frequency at which new templates are generated can be controlled with
+`-sv2interval`. The new templates are only submitted to connected clients if
+they are for a new block, or if fees have increased by at least `-sv2feedelta`.
+
+You may increase `-sv2interval`` to something your node can handle, and then
+adjust `-sv2feedelta` to limit back and forth with the pool.
+
+You can use `-debug=bench` to see how long block generation typically takes on
+your machine, look for `CreateNewBlock() ... (total ...ms)`. Another factor to
+consider is upstream rate limiting, see the [Job Declaration Protocol](https://github.com/stratum-mining/sv2-spec/blob/main/06-Job-Declaration-Protocol.md).
+Mining hardware may also incur a performance dip when it receives a new job.
+
+## Testing Guide
+
+Unfortunately testing still requires quite a few moving parts, and each setup has
+its own merits and issues.
+
+To get help with the stratum side of things, this Discord may be useful: https://discord.gg/fsEW23wFYs
+
+The Stratum Reference Implementation (SRI) provides example implementations of
+the various (other) Stratum v2 roles: https://github.com/stratum-mining/stratum
+
+You can set up an entire pool on your own machine. You can also connect to an
+existing pool and only run a limited set of roles on your machine, e.g. the
+Job Declarator client and Translator (v1 to v2).
+
+SRI includes a v1 and v2 CPU miner, but at the time of writing neither seems to work.
+Another CPU miner that does work, when used with the Translator: https://github.com/pooler/cpuminer
+
+### Regtest
+
+TODO
+
+This is also needed for functional test suite coverage. It's also the only test
+network doesn't need a standalone CPU miner or ASIC.
+
+Perhaps a mock Job Declator client can be added. We also need a way mine a given
+block template, akin to `generate`.
+
+To make testing easier it should be possible to use a connection without Noise Protocol.
+
+### Testnet
+
+The difficulty on testnet4 varies wildly, but typically much too high for CPU mining.
+Even when using a relatively cheap second hand miner, e.g. an S9, it could take
+days to find a block.
+
+The above means it's difficult to test the `SubmitSolution` message.
+
+#### Bring your own ASIC, use external testnet pool
+
+This uses an existing testnet pool. There's no need to create an account anywhere.
+The pool does not pay out the testnet coins it generates. It also currently
+doesn't censor anything, so you can't test the (solo mining) fallback behavior.
+
+First start the node:
+
+```
+build/src/bitcoind -testnet4 -sv2 -debug=sv2
+```
+
+Build and run a Job Declator client: [stratum-mining/stratum/tree/main/roles/jd-client](https://github.com/stratum-mining/stratum/tree/main/roles/jd-client
+
+This client connects to your node to receive new block templates and then "declares"
+them to a Job Declarator server. Additionally it connects to the pool itself.
+
+Copy [jdc-config-hosted-example.toml](https://github.com/stratum-mining/stratum/blob/main/roles/jd-client/config-examples/jdc-config-hosted-example.toml)
+to e.g. `~/.stratum/testnet4-jdc.toml`, change `tp_address` to `127.0.0.1:48336` and comment out `tp_authority_public_key`.
+
+The `coinbase_outputs` is used for fallback to solo mining. Generate an address
+of any type and then use the `getaddressinfo` RPC to find its public key.
+
+Finally you most likely need to use the v1 to v2 translator: [stratum-mining/stratum/tree/main/roles/translator](https://github.com/stratum-mining/stratum/tree/main/roles/translator),
+even when you have a stratum v2 capable miner (see notes on ASIC's and Firmware below).
+
+You need to point the translator to your job declator client, which in turn takes
+care of connecting to the pool. Try [tproxy-config-local-jdc-example.toml](https://github.com/stratum-mining/stratum/blob/main/roles/translator/tproxy-config-local-jdc-example.toml).
+
+As soon as you turn on the translator, the Bitcoin Core log should show a `SetupConnection` [message](https://github.com/stratum-mining/sv2-spec/blob/main/08-Message-Types.md).
+
+Now point your ASIC to the translator. At this point you should be seeing
+`NewTemplate`, `SetNewPrevHash` and `SetNewPrevHash` messages.
+
+If the pool is down, notify someone on the above mentioned Discord.
+
+### Custom Signet
+
+Unlike testnet4, signet(s) use the regular difficulty adjustment mechanism.
+Although the default signet has very low difficulty, you can't mine on it,
+because to do so requires signing blocks using a private key that only two people have.
+
+It's possible to create a signet that does not require signatures. There's no
+such public network, because it would risk being "attacked" by very powerful
+ASIC's. They could massively increase the difficulty and then disappear, making
+it impossible for a CPU miner to append new blocks.
+
+Instead, you can create your own custom unsigned signet. Unlike regtest this
+network does have difficulty (adjustment). This allows you to test if e.g. pool
+software correctly sets and adjusts the share difficulty for each participant.
+Although for the Template Provider role this is not relevant.
+
+#### Creating the signet
+
+See also [signet/README.md](../contrib/signet/README.md)
+
+If you use the default signet for anything else, create a fresh data directory.
+
+Add the following to `bitcoin.conf`:
+
+```ini
+[signet]
+# OP_TRUE
+signetchallenge=51
+```
+
+This challenge represents "the special case where an empty solution is valid
+(i.e. scriptSig and scriptWitness are both empty)", see [BIP 325](https://github.com/bitcoin/bips/blob/master/bip-0325.mediawiki). For mining software things will look just like testnet.
+
+The new chain needs to have at least 16 blocks, or the SRI software will panick.
+So we'll mine those using `bitcoin-util grind`:
+
+```sh
+CLI="build/src/bitcoin-cli"
+MINER="contrib/signet/miner"
+GRIND="build/src/bitcoin-util grind"
+ADDR=...
+NBITS=1d00ffff
+$MINER --cli="$CLI" generate --grind-cmd="$GRIND" --address="$ADDR" --nbits=$NBITS
+```
+
+#### Mining
+
+The cleanest setup involves two connected nodes, each with their own data
+directory: one for the pool and one for the miner. By selectively breaking the
+connection you can inspect how unknown transactions in the template are requested
+by the pool, and how a newly found block is submitted is submitted both by the
+pool and the miner.
+
+However things should work fine with just one node.
+
+Start the miner node first, with a GUI for convenience:
+
+```sh
+src/qt/bitcoin-qt -datadir=$HOME/.stratum/bitcoin -signet
+```
+
+Suggested config for the pool node:
+
+```ini
+[signet]
+# OP_TRUE
+signetchallenge=51
+server=0
+listen=0
+connect=127.0.0.1
+```
+
+The above disables its RPC server and p2p listening to avoid a port conflict.
+
+Start the pool node:
+
+```sh
+build/src/bitcoind -datadir=$HOME/.stratum/bitcoin-pool -signet
+```
+
+Configure an SRI pool:
+
+```
+cd roles/pool
+mkdir -p ~/.stratum
+cp
+```
+
+Start the SRI pool:
+
+```sh
+cargo run -p pool_sv2 -- -c ~/.stratum/signet-pool.toml
+```
+
+For the Job Declarator _client_ and Translator, see Testnet above.
+
+Now use the [CPU miner](https://github.com/pooler/cpuminer) and point it to the translator:
+
+```
+./minerd -a sha256d -o stratum+tcp://localhost:34255 -q -D -P
+```
+
+
+#### Mining after being away
+
+The Template Provider will not start until the node is caught up.
+Use `bitcoin-util grind` as explained above for it to catch up.
+
+### Mainnet
+
+See testnet for how to use an external pool. See signet for how to configure your own pool.
+
+Pools that support Stratum v2 on mainnet:
+
+* Braiins: unclear if they are currently compatible with latest spec. URL's are
+           listed [here](https://academy.braiins.com/en/braiins-pool/stratum-v2-manual/#servers-and-ports). There's no Job Declarator server.
+* DEMAND : No account needed for solo mining. Both the pool and Job Declarator
+           server are at `dmnd.work:2000`. Requires a custom SRI branch, see [instructions](https://dmnd.work/#solo-mine).
+
+### Notes on ASIC's and Firmware:
+
+#### BraiinsOS
+
+* v22.08.1 uses an (incompatible) older version of Stratum v2
+* v23.12 is untested (and not available on S9)
+* v22.08.1 when used in Stratum v1 mode, does not work with the SRI Translator
+
+#### Antminer stock OS
+
+This should work with the Translator, but has not been tested.
diff --git a/src/init.cpp b/src/init.cpp
index 1e95bccdccaaa..39f30dc51d861 100644
--- a/src/init.cpp
+++ b/src/init.cpp
@@ -664,7 +664,7 @@ void SetupServerArgs(ArgsManager& argsman, bool can_listen_ipc)
     argsman.AddArg("-blockmintxfee=<amt>", strprintf("Set lowest fee rate (in %s/kvB) for transactions to be included in block creation. (default: %s)", CURRENCY_UNIT, FormatMoney(DEFAULT_BLOCK_MIN_TX_FEE)), ArgsManager::ALLOW_ANY, OptionsCategory::BLOCK_CREATION);
     argsman.AddArg("-blockversion=<n>", "Override block version to test forking scenarios", ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::BLOCK_CREATION);
 #ifdef WITH_SV2
-    argsman.AddArg("-sv2", "Bitcoind will act as a Stratum v2 Template Provider (default: false)", ArgsManager::ALLOW_ANY, OptionsCategory::BLOCK_CREATION);
+    argsman.AddArg("-sv2", "Bitcoind will act as a Stratum v2 Template Provider, see doc/stratum-v2.md (default: false)", ArgsManager::ALLOW_ANY, OptionsCategory::BLOCK_CREATION);
     argsman.AddArg("-sv2interval", strprintf("Template Provider block template update interval (default: %d seconds)", Sv2TemplateProviderOptions().fee_check_interval.count()), ArgsManager::ALLOW_ANY, OptionsCategory::BLOCK_CREATION);
     argsman.AddArg("-sv2feedelta", strprintf("Minimum fee delta for Template Provider to send update upstream (default: %d sat)", uint64_t(Sv2TemplateProviderOptions().fee_delta)), ArgsManager::ALLOW_ANY, OptionsCategory::BLOCK_CREATION);
 #endif