adding github workflow #1
70 tests run, 46 passed, 0 skipped, 24 failed.
Annotations
Check failure on line 6 in tests/device/test_device_reset.py
github-actions / JUnit Test Report
tests/device/test_device_reset.py.test
test setup failure
Raw output
request = <SubRequest 'bridge' for <Function test>>
@pytest.fixture(scope="session")
def bridge(request):
> serial_port = _get_serial_port(request.config, validate=True)
conftest.py:52:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
config = <_pytest.config.Config object at 0x10582a220>, validate = True
def _get_serial_port(config, validate=False):
"""
Get the serial port to be used for the tests.
"""
port = config.getoption("--serial-port")
if (validate is True) and (port is None):
> raise ValueError("Please specify the serial port to be used with "
"the '--serial-port' argument.")
E ValueError: Please specify the serial port to be used with the '--serial-port' argument.
conftest.py:27: ValueError
Check failure on line 6 in tests/device/test_get_product_name.py
github-actions / JUnit Test Report
tests/device/test_get_product_name.py.test
test setup failure
Raw output
request = <SubRequest 'bridge' for <Function test>>
@pytest.fixture(scope="session")
def bridge(request):
> serial_port = _get_serial_port(request.config, validate=True)
conftest.py:52:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
config = <_pytest.config.Config object at 0x10582a220>, validate = True
def _get_serial_port(config, validate=False):
"""
Get the serial port to be used for the tests.
"""
port = config.getoption("--serial-port")
if (validate is True) and (port is None):
> raise ValueError("Please specify the serial port to be used with "
"the '--serial-port' argument.")
E ValueError: Please specify the serial port to be used with the '--serial-port' argument.
conftest.py:27: ValueError
Check failure on line 6 in tests/device/test_get_serial_number.py
github-actions / JUnit Test Report
tests/device/test_get_serial_number.py.test
test setup failure
Raw output
request = <SubRequest 'bridge' for <Function test>>
@pytest.fixture(scope="session")
def bridge(request):
> serial_port = _get_serial_port(request.config, validate=True)
conftest.py:52:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
config = <_pytest.config.Config object at 0x10582a220>, validate = True
def _get_serial_port(config, validate=False):
"""
Get the serial port to be used for the tests.
"""
port = config.getoption("--serial-port")
if (validate is True) and (port is None):
> raise ValueError("Please specify the serial port to be used with "
"the '--serial-port' argument.")
E ValueError: Please specify the serial port to be used with the '--serial-port' argument.
conftest.py:27: ValueError
Check failure on line 6 in tests/device/test_get_set_fan_auto_cleaning_interval.py
github-actions / JUnit Test Report
tests/device/test_get_set_fan_auto_cleaning_interval.py.test
test setup failure
Raw output
request = <SubRequest 'bridge' for <Function test>>
@pytest.fixture(scope="session")
def bridge(request):
> serial_port = _get_serial_port(request.config, validate=True)
conftest.py:52:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
config = <_pytest.config.Config object at 0x10582a220>, validate = True
def _get_serial_port(config, validate=False):
"""
Get the serial port to be used for the tests.
"""
port = config.getoption("--serial-port")
if (validate is True) and (port is None):
> raise ValueError("Please specify the serial port to be used with "
"the '--serial-port' argument.")
E ValueError: Please specify the serial port to be used with the '--serial-port' argument.
conftest.py:27: ValueError
Check failure on line 6 in tests/device/test_get_set_nox_tuning_parameters.py
github-actions / JUnit Test Report
tests/device/test_get_set_nox_tuning_parameters.py.test
test setup failure
Raw output
request = <SubRequest 'bridge' for <Function test>>
@pytest.fixture(scope="session")
def bridge(request):
> serial_port = _get_serial_port(request.config, validate=True)
conftest.py:52:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
config = <_pytest.config.Config object at 0x10582a220>, validate = True
def _get_serial_port(config, validate=False):
"""
Get the serial port to be used for the tests.
"""
port = config.getoption("--serial-port")
if (validate is True) and (port is None):
> raise ValueError("Please specify the serial port to be used with "
"the '--serial-port' argument.")
E ValueError: Please specify the serial port to be used with the '--serial-port' argument.
conftest.py:27: ValueError
Check failure on line 6 in tests/device/test_get_set_rht_acceleration_mode.py
github-actions / JUnit Test Report
tests/device/test_get_set_rht_acceleration_mode.py.test
test setup failure
Raw output
request = <SubRequest 'bridge' for <Function test>>
@pytest.fixture(scope="session")
def bridge(request):
> serial_port = _get_serial_port(request.config, validate=True)
conftest.py:52:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
config = <_pytest.config.Config object at 0x10582a220>, validate = True
def _get_serial_port(config, validate=False):
"""
Get the serial port to be used for the tests.
"""
port = config.getoption("--serial-port")
if (validate is True) and (port is None):
> raise ValueError("Please specify the serial port to be used with "
"the '--serial-port' argument.")
E ValueError: Please specify the serial port to be used with the '--serial-port' argument.
conftest.py:27: ValueError
Check failure on line 6 in tests/device/test_get_set_temperature_offset_parameters.py
github-actions / JUnit Test Report
tests/device/test_get_set_temperature_offset_parameters.py.test_no_arg
test setup failure
Raw output
request = <SubRequest 'bridge' for <Function test>>
@pytest.fixture(scope="session")
def bridge(request):
> serial_port = _get_serial_port(request.config, validate=True)
conftest.py:52:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
config = <_pytest.config.Config object at 0x10582a220>, validate = True
def _get_serial_port(config, validate=False):
"""
Get the serial port to be used for the tests.
"""
port = config.getoption("--serial-port")
if (validate is True) and (port is None):
> raise ValueError("Please specify the serial port to be used with "
"the '--serial-port' argument.")
E ValueError: Please specify the serial port to be used with the '--serial-port' argument.
conftest.py:27: ValueError
Check failure on line 25 in tests/device/test_get_set_temperature_offset_parameters.py
github-actions / JUnit Test Report
tests/device/test_get_set_temperature_offset_parameters.py.test_raw_false
test setup failure
Raw output
request = <SubRequest 'bridge' for <Function test>>
@pytest.fixture(scope="session")
def bridge(request):
> serial_port = _get_serial_port(request.config, validate=True)
conftest.py:52:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
config = <_pytest.config.Config object at 0x10582a220>, validate = True
def _get_serial_port(config, validate=False):
"""
Get the serial port to be used for the tests.
"""
port = config.getoption("--serial-port")
if (validate is True) and (port is None):
> raise ValueError("Please specify the serial port to be used with "
"the '--serial-port' argument.")
E ValueError: Please specify the serial port to be used with the '--serial-port' argument.
conftest.py:27: ValueError
Check failure on line 53 in tests/device/test_get_set_temperature_offset_parameters.py
github-actions / JUnit Test Report
tests/device/test_get_set_temperature_offset_parameters.py.test_raw_true
test setup failure
Raw output
request = <SubRequest 'bridge' for <Function test>>
@pytest.fixture(scope="session")
def bridge(request):
> serial_port = _get_serial_port(request.config, validate=True)
conftest.py:52:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
config = <_pytest.config.Config object at 0x10582a220>, validate = True
def _get_serial_port(config, validate=False):
"""
Get the serial port to be used for the tests.
"""
port = config.getoption("--serial-port")
if (validate is True) and (port is None):
> raise ValueError("Please specify the serial port to be used with "
"the '--serial-port' argument.")
E ValueError: Please specify the serial port to be used with the '--serial-port' argument.
conftest.py:27: ValueError
Check failure on line 6 in tests/device/test_get_set_voc_state.py
github-actions / JUnit Test Report
tests/device/test_get_set_voc_state.py.test
test setup failure
Raw output
request = <SubRequest 'bridge' for <Function test>>
@pytest.fixture(scope="session")
def bridge(request):
> serial_port = _get_serial_port(request.config, validate=True)
conftest.py:52:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
config = <_pytest.config.Config object at 0x10582a220>, validate = True
def _get_serial_port(config, validate=False):
"""
Get the serial port to be used for the tests.
"""
port = config.getoption("--serial-port")
if (validate is True) and (port is None):
> raise ValueError("Please specify the serial port to be used with "
"the '--serial-port' argument.")
E ValueError: Please specify the serial port to be used with the '--serial-port' argument.
conftest.py:27: ValueError
Check failure on line 6 in tests/device/test_get_set_voc_tuning_parameters.py
github-actions / JUnit Test Report
tests/device/test_get_set_voc_tuning_parameters.py.test
test setup failure
Raw output
request = <SubRequest 'bridge' for <Function test>>
@pytest.fixture(scope="session")
def bridge(request):
> serial_port = _get_serial_port(request.config, validate=True)
conftest.py:52:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
config = <_pytest.config.Config object at 0x10582a220>, validate = True
def _get_serial_port(config, validate=False):
"""
Get the serial port to be used for the tests.
"""
port = config.getoption("--serial-port")
if (validate is True) and (port is None):
> raise ValueError("Please specify the serial port to be used with "
"the '--serial-port' argument.")
E ValueError: Please specify the serial port to be used with the '--serial-port' argument.
conftest.py:27: ValueError
Check failure on line 6 in tests/device/test_get_set_warm_start_parameter.py
github-actions / JUnit Test Report
tests/device/test_get_set_warm_start_parameter.py.test_no_arg
test setup failure
Raw output
request = <SubRequest 'bridge' for <Function test>>
@pytest.fixture(scope="session")
def bridge(request):
> serial_port = _get_serial_port(request.config, validate=True)
conftest.py:52:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
config = <_pytest.config.Config object at 0x10582a220>, validate = True
def _get_serial_port(config, validate=False):
"""
Get the serial port to be used for the tests.
"""
port = config.getoption("--serial-port")
if (validate is True) and (port is None):
> raise ValueError("Please specify the serial port to be used with "
"the '--serial-port' argument.")
E ValueError: Please specify the serial port to be used with the '--serial-port' argument.
conftest.py:27: ValueError
Check failure on line 20 in tests/device/test_get_set_warm_start_parameter.py
github-actions / JUnit Test Report
tests/device/test_get_set_warm_start_parameter.py.test_raw_false
test setup failure
Raw output
request = <SubRequest 'bridge' for <Function test>>
@pytest.fixture(scope="session")
def bridge(request):
> serial_port = _get_serial_port(request.config, validate=True)
conftest.py:52:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
config = <_pytest.config.Config object at 0x10582a220>, validate = True
def _get_serial_port(config, validate=False):
"""
Get the serial port to be used for the tests.
"""
port = config.getoption("--serial-port")
if (validate is True) and (port is None):
> raise ValueError("Please specify the serial port to be used with "
"the '--serial-port' argument.")
E ValueError: Please specify the serial port to be used with the '--serial-port' argument.
conftest.py:27: ValueError
Check failure on line 38 in tests/device/test_get_set_warm_start_parameter.py
github-actions / JUnit Test Report
tests/device/test_get_set_warm_start_parameter.py.test_raw_true
test setup failure
Raw output
request = <SubRequest 'bridge' for <Function test>>
@pytest.fixture(scope="session")
def bridge(request):
> serial_port = _get_serial_port(request.config, validate=True)
conftest.py:52:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
config = <_pytest.config.Config object at 0x10582a220>, validate = True
def _get_serial_port(config, validate=False):
"""
Get the serial port to be used for the tests.
"""
port = config.getoption("--serial-port")
if (validate is True) and (port is None):
> raise ValueError("Please specify the serial port to be used with "
"the '--serial-port' argument.")
E ValueError: Please specify the serial port to be used with the '--serial-port' argument.
conftest.py:27: ValueError
Check failure on line 7 in tests/device/test_get_version.py
github-actions / JUnit Test Report
tests/device/test_get_version.py.test
test setup failure
Raw output
request = <SubRequest 'bridge' for <Function test>>
@pytest.fixture(scope="session")
def bridge(request):
> serial_port = _get_serial_port(request.config, validate=True)
conftest.py:52:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
config = <_pytest.config.Config object at 0x10582a220>, validate = True
def _get_serial_port(config, validate=False):
"""
Get the serial port to be used for the tests.
"""
port = config.getoption("--serial-port")
if (validate is True) and (port is None):
> raise ValueError("Please specify the serial port to be used with "
"the '--serial-port' argument.")
E ValueError: Please specify the serial port to be used with the '--serial-port' argument.
conftest.py:27: ValueError
Check failure on line 7 in tests/device/test_read_data_ready.py
github-actions / JUnit Test Report
tests/device/test_read_data_ready.py.test_normal_mode
test setup failure
Raw output
request = <SubRequest 'bridge' for <Function test>>
@pytest.fixture(scope="session")
def bridge(request):
> serial_port = _get_serial_port(request.config, validate=True)
conftest.py:52:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
config = <_pytest.config.Config object at 0x10582a220>, validate = True
def _get_serial_port(config, validate=False):
"""
Get the serial port to be used for the tests.
"""
port = config.getoption("--serial-port")
if (validate is True) and (port is None):
> raise ValueError("Please specify the serial port to be used with "
"the '--serial-port' argument.")
E ValueError: Please specify the serial port to be used with the '--serial-port' argument.
conftest.py:27: ValueError
Check failure on line 7 in tests/device/test_read_device_status.py
github-actions / JUnit Test Report
tests/device/test_read_device_status.py.test_no_args
test setup failure
Raw output
request = <SubRequest 'bridge' for <Function test>>
@pytest.fixture(scope="session")
def bridge(request):
> serial_port = _get_serial_port(request.config, validate=True)
conftest.py:52:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
config = <_pytest.config.Config object at 0x10582a220>, validate = True
def _get_serial_port(config, validate=False):
"""
Get the serial port to be used for the tests.
"""
port = config.getoption("--serial-port")
if (validate is True) and (port is None):
> raise ValueError("Please specify the serial port to be used with "
"the '--serial-port' argument.")
E ValueError: Please specify the serial port to be used with the '--serial-port' argument.
conftest.py:27: ValueError
Check failure on line 23 in tests/device/test_read_device_status.py
github-actions / JUnit Test Report
tests/device/test_read_device_status.py.test_without_clear
test setup failure
Raw output
request = <SubRequest 'bridge' for <Function test>>
@pytest.fixture(scope="session")
def bridge(request):
> serial_port = _get_serial_port(request.config, validate=True)
conftest.py:52:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
config = <_pytest.config.Config object at 0x10582a220>, validate = True
def _get_serial_port(config, validate=False):
"""
Get the serial port to be used for the tests.
"""
port = config.getoption("--serial-port")
if (validate is True) and (port is None):
> raise ValueError("Please specify the serial port to be used with "
"the '--serial-port' argument.")
E ValueError: Please specify the serial port to be used with the '--serial-port' argument.
conftest.py:27: ValueError
Check failure on line 35 in tests/device/test_read_device_status.py
github-actions / JUnit Test Report
tests/device/test_read_device_status.py.test_with_clear
test setup failure
Raw output
request = <SubRequest 'bridge' for <Function test>>
@pytest.fixture(scope="session")
def bridge(request):
> serial_port = _get_serial_port(request.config, validate=True)
conftest.py:52:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
config = <_pytest.config.Config object at 0x10582a220>, validate = True
def _get_serial_port(config, validate=False):
"""
Get the serial port to be used for the tests.
"""
port = config.getoption("--serial-port")
if (validate is True) and (port is None):
> raise ValueError("Please specify the serial port to be used with "
"the '--serial-port' argument.")
E ValueError: Please specify the serial port to be used with the '--serial-port' argument.
conftest.py:27: ValueError
Check failure on line 8 in tests/device/test_read_measured_values.py
github-actions / JUnit Test Report
tests/device/test_read_measured_values.py.test_idle_mode
test setup failure
Raw output
request = <SubRequest 'bridge' for <Function test>>
@pytest.fixture(scope="session")
def bridge(request):
> serial_port = _get_serial_port(request.config, validate=True)
conftest.py:52:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
config = <_pytest.config.Config object at 0x10582a220>, validate = True
def _get_serial_port(config, validate=False):
"""
Get the serial port to be used for the tests.
"""
port = config.getoption("--serial-port")
if (validate is True) and (port is None):
> raise ValueError("Please specify the serial port to be used with "
"the '--serial-port' argument.")
E ValueError: Please specify the serial port to be used with the '--serial-port' argument.
conftest.py:27: ValueError
Check failure on line 25 in tests/device/test_read_measured_values.py
github-actions / JUnit Test Report
tests/device/test_read_measured_values.py.test_measure_mode
test setup failure
Raw output
request = <SubRequest 'bridge' for <Function test>>
@pytest.fixture(scope="session")
def bridge(request):
> serial_port = _get_serial_port(request.config, validate=True)
conftest.py:52:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
config = <_pytest.config.Config object at 0x10582a220>, validate = True
def _get_serial_port(config, validate=False):
"""
Get the serial port to be used for the tests.
"""
port = config.getoption("--serial-port")
if (validate is True) and (port is None):
> raise ValueError("Please specify the serial port to be used with "
"the '--serial-port' argument.")
E ValueError: Please specify the serial port to be used with the '--serial-port' argument.
conftest.py:27: ValueError
Check failure on line 6 in tests/device/test_start_fan_cleaning.py
github-actions / JUnit Test Report
tests/device/test_start_fan_cleaning.py.test
test setup failure
Raw output
request = <SubRequest 'bridge' for <Function test>>
@pytest.fixture(scope="session")
def bridge(request):
> serial_port = _get_serial_port(request.config, validate=True)
conftest.py:52:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
config = <_pytest.config.Config object at 0x10582a220>, validate = True
def _get_serial_port(config, validate=False):
"""
Get the serial port to be used for the tests.
"""
port = config.getoption("--serial-port")
if (validate is True) and (port is None):
> raise ValueError("Please specify the serial port to be used with "
"the '--serial-port' argument.")
E ValueError: Please specify the serial port to be used with the '--serial-port' argument.
conftest.py:27: ValueError
Check failure on line 7 in tests/device/test_start_stop_measurement.py
github-actions / JUnit Test Report
tests/device/test_start_stop_measurement.py.test_normal_mode
test setup failure
Raw output
request = <SubRequest 'bridge' for <Function test>>
@pytest.fixture(scope="session")
def bridge(request):
> serial_port = _get_serial_port(request.config, validate=True)
conftest.py:52:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
config = <_pytest.config.Config object at 0x10582a220>, validate = True
def _get_serial_port(config, validate=False):
"""
Get the serial port to be used for the tests.
"""
port = config.getoption("--serial-port")
if (validate is True) and (port is None):
> raise ValueError("Please specify the serial port to be used with "
"the '--serial-port' argument.")
E ValueError: Please specify the serial port to be used with the '--serial-port' argument.
conftest.py:27: ValueError
Check failure on line 22 in tests/device/test_start_stop_measurement.py
github-actions / JUnit Test Report
tests/device/test_start_stop_measurement.py.test_without_pm
test setup failure
Raw output
request = <SubRequest 'bridge' for <Function test>>
@pytest.fixture(scope="session")
def bridge(request):
> serial_port = _get_serial_port(request.config, validate=True)
conftest.py:52:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
config = <_pytest.config.Config object at 0x10582a220>, validate = True
def _get_serial_port(config, validate=False):
"""
Get the serial port to be used for the tests.
"""
port = config.getoption("--serial-port")
if (validate is True) and (port is None):
> raise ValueError("Please specify the serial port to be used with "
"the '--serial-port' argument.")
E ValueError: Please specify the serial port to be used with the '--serial-port' argument.
conftest.py:27: ValueError