diff --git a/README.md b/README.md
index 5d0918a..f46ebbb 100644
--- a/README.md
+++ b/README.md
@@ -14,8 +14,11 @@ Current image versie: 1.1\
 Initial documentation at:  [here](https://www.iotforall.com/tensorflow-sound-classification-machine-learning-applications/)
 
 # Installation
-Fetch a preloaded PI image from: (to be determined) and install as you would a standard stretch image\
-**or**\
+Fetch a preloaded PI image from: https://drive.google.com/open?id=1sxMrxHLQPB092P9lWIoXFkvLKNX6K7Da Download this, extract the zip, en put the image on a 16GB SD card (like you would put a stretch image). Downloading
+will take some time, though. Be advised, it is just a simple copy of a prefab installation, maybe some additional configuration has to be done.
+
+**- or -**
+
 Go to the directory installpi of this repository and follow the instructions in INSTALL.md. When done, return here.
 
 After installation, the user - password should be pi - openears. Change as you see fit.\
diff --git a/installpi/INSTALL.md b/installpi/INSTALL.md
index e4bc712..963e39a 100644
--- a/installpi/INSTALL.md
+++ b/installpi/INSTALL.md
@@ -17,7 +17,7 @@ Start the pi and ssh into it.
 
 From this point on, all the installation steps are offcourse done on the pi, not on your host system (!) 
 
-Set the password with raspi-config for the pi user to "openears" (or whatever you think is appropriate, jot it down!). Best to install VNC also.
+Set the password with `sudo raspi-config` for the pi user to "openears" (or whatever you think is appropriate, jot it down!). Best to install VNC also.
 
 Make the VNC autostart (if you like that) with the method described here: https://learn.adafruit.com/adafruit-raspberry-pi-lesson-7-remote-control-with-vnc/running-vncserver-at-startup