-
Notifications
You must be signed in to change notification settings - Fork 327
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Item list #82
Comments
I hope this helps |
@amiltonwong I purchased about half of the items online, but the other half I bought at a local electronics store (Microcenter, in my case). Some of the items I bought online were extremely cheap but had to be shipped from overseas, and shipping time was 3-4 weeks in some cases. What I learned is that I'm far too impatient to wait multiple weeks to begin tinkering, so I recommend buying everything from your local electronics store and then you can get started the same day. Most of the items are Raspberry Pi peripherals, so find a place that sells the Pi and you can probably find the rest. So short answer is I haven't posted links because the online retailers I used simply took too long and I discourage going that route. |
Hi, |
And how many ultrasound probes would i need? |
I saw some people using these ultrasonic sensors: |
@0ca Yes, HC-SR04 is what I used. You can buy them from lots of places and they're usually pretty cheap (less than or about $5). @GoldenWings I only use one, but that's just because the car I use is very small and can't fit more (the wiring takes up a lot of space). On bigger cars I've seen people use as many as 5. If you put some in the back you can teach the car how to parallel park. I saw this somewhere on YouTube, but I don't have the link available. |
Hi, Ryan,
Could you reply the item list for the self driving toy car , it'll be more helpful if the direct purchase links for the items are included.
The text was updated successfully, but these errors were encountered: