All notable changes to this project will be documented in this file.
- [firmware] not able to connect MQTT server #157 @fivosg
- [firmware] log for firmware update #152
- [webui] Expired access attempts logged as "Expired"
- [firmware] validuntil is being ignored #151
- [firmware] the boot loop when ssid is empty on configuration file (actually more a workaround than a fix) #154
- [webui] sanity check for firmware update file #152
- [firmware] MQTT reconnect code (dirty hack) #149
- [firmware] Global websocket message to inform ws clients to toggle relay (upcoming client version will use it)
- [webui] incremental id for event log
- [webui] available flash space calculation
- [webui] #143 duplicate records on User Data backup
- [firmware] #140 MQTT Heartbeat
- [webui] official board's hardware settings did not populate
- [firmware] do not initialize serial output unless we are debugging
- [build] slice main.cpp to multiple parts for better readability
- [webui] Access Type Active to Always
- [firmware] more reliable activation of relay
- [firmware] Flash partition is changed to 1+3 !!! You need to backup your settings and users before updating to this version
- [firmware] For wiegand readers card id's changed hexadecimal to decimal !!! You need to change hexadecimal values to decimal values on your user backup file
- [build] Optimize code for official board
- [firmware] mqtt boot, hearthbeat, access message added
- [firmware] #128 Do not retain MQTT publishes
- [firmware] Compiller warnings fixed
- [webui] Default wifi type to AP
- [firmware] MQTT Messages are now plain JSON encoded texts
- [build] flash.bat file now asks which firmware to flash
- [firmware] #98 WDT Reset
- [build] BearSSL dependency error with Platformio
- [webui] #115 version numbering
- [firmware] #101 Permanent AP Mode
- [build] Updated PlatformIO configuration file for next PIO release
- [webui] comment out access types
- [firmware] fix a compile warning
- [firmware] change startAP behaviour
- [firmware] publish username to MQTT broker
- [firmware] mqtt username password memory collusion
- [firmware] Modified header
- [firmware] More debug messages
- [webui] minor fixes suggested by Codacy
- [webui] get javascript values as real integers
- [webui] MQTT is enabled by default.
- [firmware] + [webui] Option to use static IP address #89 @nbaglietto
- [firmware] + [webui] Option to hide SSID on AP Mode #89 @nbaglietto
- [webui] Auto focus on login password #94 @pidiet
- [firmware] event log for MQTT
- [webui] We were checking wrongly if the browser has previously had authentication over /login.
- [webui] MQTT listed disabled even if it is enabled #92 @pidiet
- [firmware] !!! BREAKING CHANGE !!! 2 MB Flash 2 MB SPIFFS size for future proof firmware updates plase make sure you made a backup before updating to this version. You need to format SPIFFS.
- [firmware] Experimental PN532 RFID Reader Support
- [webui] Try to connect button upon inprogress complete.
- [webui] Restart without saving changes.
- [firmware] Staging framework for platformio
- [webui] Sign in panel now integrated into index.html
- [firmware] Reduced serial outputs.
- [firmware] Switched to Async MQTT Library, needs testing.
- [firmware] Logs causing Exception 9 because we are delaying async function with NTP sync by WiFi.hostbyname
- [webui] wrong version is shown #80.
- [webui] whole html was shifted with previous css change.
- [firmware] Factory reset via pin
- [firmware] ICACHE_FLASH_ATTR and ICACHE_RAM_ATTR decorators (did not feel any difference in terms of speed, keeping it anyway).
- [dev tools] Web UI Demo https://bitadvise.com/esp-rfid/
- [dev tools] Websocket emulator access log
- [webui] Always show sidebar on big screens
- [webui] Better versioning.
- [build] Platformio bug
- [firmware] Restart ESP if softAP fails.
- [webui] Colorize access log based on result.
- [webui] progress bar for factory reset, update, save settings does not initiated correctly.
- [webui] BSSID is missing when first scan.
- [webui] Now firmware internally holds only unix time, made changes on webui to cover that.
- [webui] Completely refactored html loading, we are getting all files at first login, then no request is made to web server which greatly simplifies some functions.
- [webui] + [firmware] Completely refactored Latest Access Log, it's now unlimited Access Log which holds every picc scan. This should fix #60 (at least there is clear log button :) ).
- [webui] Event log table now displays firmware time for early events.
- [webui] before fetching data wait sidebar to dismiss for smooth animation.
- [webui] fade in web content.
- [firmware] Log login remote IP address.
- [webui] colorize event logs based on severity.
- [webui] progress bar on saving settings.
- [dev tools] event log for websocket emulator
- [firmware] Fix #75 Scan of wifi returns more columns of the same wifi.
- [webui] Fix #74 #33 completely New user with incorrect validity.
- [webui] New user with incorrect date.
- [webui] Editing user results non parsed values.
- [webui] event table breakpoints.
- [webui] Firmware Update is now live with latest version check on GitHub.
- [firmware] Update was possible with an unauthorized HTTP Post.
- [webui] Factory reset within Web UI.
- [webui] + [firmware] Event logging is now live.
- [firmware] Can not with default password login on fresh setup.
- [webui] Changes suggested from Codacy.
- [firmware] !!!! Breaking Change !!!! Factory reset on boot if GPIO-16 is LOW or SPIFFS is corrupted. Make changes accordingly.
- [webui] Touch detect on touch enabled devices in order to open/close sidebar on swipe.
- [webui] Logout is now live (this is actually a dirty hack);
- [dev tools] - Websocket emulator time was static
- [firmware] #68 NTP functions cause Exception 9 and ESP crashes
- [webui] Embarrassing multiple HTM pages now reduced to one.
- [webui] Better representing of device and browser times on NTP settings.
- [webui] Prevent closing restore modal until it is finished.
- [firmware] Refactored NTP.
- [webui] Removed GPIO-16 options due to it is being used for Factory Reset
- [firmware] Drop usage of NTPClientLib.
- [firmware + webui] Embedded web files
- [firmware + webui] MQTT to main branch.
- [firmware + webui] Access column to logs for the information, if the access was granted or not @romanzava
- [build] Travis CI
- [firmware] Glyphicons redirection for SPIFFS's limited 32 char filename.
- [dev tools] WebSocket emulator for rapid web page development. (This require node.js)
- [build] Gulp script for auto css/js file concat and gzip
- [dev tools] Offline static web page development capability (enter "neo" as admin password for local testing)
- [dev tools] gulp script for PROGMEM web files.
- [webui] New look and feel - refactored Web UI
- [webui] Hardcoded FooTable Add/Edit text
- [webui] Only support woff glyphicons font
- [dev tools] Clean and beautify main.cpp @nardev
- [webui] Minor cosmetic changes
- [webui] Javascript loading moved to end of the html
- [build] more meaningful directories for web files.
- [webui] RSSI percent calculation
- [firmware] Limit printScanResult to 5 best (based on RSSI) networks around (esp becomes unresponsive if there are too many networks)
- [build] pio script where we were trying to modify flashing parameters it was affecting SPIFFS upload too.
- [firmware + webui] MQTT - UID publish was missing.
- [firmware] Web files no longer contained in SPIFFS
- [firmware] SPIFFS Editor.
- [firmware] Confusion about MFRC533 reader.
- Initial Wiegand Reader (RFID Reader) support. - @nardev
- Use secure WebSocket protocol if there is a reverse proxy available. - @thunderace
- Default IDE is now PlatformIO, from now on Arduino IDE support is dropped.
- SPIFFS Editor's password is now same with the administration password -@thunderace
- SPI SS pin is now have a default value 15 when there is no configuration file. - @thunderace
- Partly fixed (We still have a quirk with adding new user, may fixed by library level) #33
- Fallback AP now gets SSID ESP-RFID-xxxxxx (last 6 digits of mac).
- Also refactored to remove code duplication, new method startAP(ssid, password=NULL) rather than duplicating AP creation.
- Automatically disconnects wifi until an "admin" card is read in by the user. Default is to keep wifi on unless configured otherwise.
- Add automatic restart setting, to lessen risk of memory leaks and crashes.
- The wifi network created will have the same name as the "hostname", in case you have multiple units nearby
- Also some minor tweaks to web interface.
- MQTT support is on another branch.
- Basic Authentication on WebSocket
- minor cosmetic change
- WebSocket fails without null pointer on Mac #17
- New /compiledbin/flash.bat for easy flashing (For Windows Users)
- Sort Latest Log by Date
- 2 second cooldown for RFID Tag scans (to prevent double scans)
- Refactored Wi-Fi Network Scan. Now we are scanning hidden networks too, also additional info is now given to Web UI (Signal Strenght, BSSID of the Network also non used Encryption Type, Channel)
- Scanned Wi-Fi Network List is now sorted by Signal Strenght (RSSI, greater is better)
- Uptime to status
- Tooltips for settings
- Captive Portal
- Support for both Active Low and Active High Relays
- Basic loging (inefficent and limited to last 15 records)
- #11 Simplified captive portal behaviour for stable AP Mode experience.
- Support for jQuery v1.12.4
- Support for Bootstrap Javascript v3.3.7
- Support for Bootstrap Glyphicons
- Support for FooTable v3.1.6
- Refactored picclist command (JSON Array is now more human readable, can be queried page by page, initially 15 records per page due to Mobile Devices limiting maximum WebSocket message lenght, I do not know if this a feature or a bug)
- Restoring User Data is improved (restoring is now done one by one only when the ESP is ready to digest another userfile)
- Backup User Data is improved (thanks to newly optimized userlist command we are getting all the data from ESP page by page)
- Refactored User List (thanks to FooTable user list is now fully searchable, sortable, filterable, editable)
- Refactored framework's required Javascript and CSS files (All files minified and gzipped together, this will reduce requests made to ESP)
- While restoring user data now we are showing a pop-up (bootstrap modal)
- Run a test where 1000! users can be handled (see https://github.com/omersiar/esp-rfid#tests)
- BSSID Setting (This will allow to connect specific Access Point if there are more than one AP with the same SSID)
- Available SPIFFS storage @rneurink
- Incorrect time were being sent to device (without timezone offset)
- Device Status in AP Mode @rneurink
- ESP gets unresponsive when device is in AP Mode (esprfid#11)
- Colorize progress bars depending on percentage @rneurink
- haveAcc to acctype (This will break backward compatibility if you made backup on previous version, there is a workaround that i can share if anyone wants)
- Switched to new NTP Client Library https://github.com/gmag11/NtpClient/
- Time Settings
- Hostname Setting
- UID sanity check on Users Page
- Restoring Users too fast (increased to 200ms) @rneurink
- Device Status location
- Bootstrap Version to v3.3.7
- Dropped NTPClient Library Usage (since we have TimeLib)
- New WebSocket command "status" (sends bunch of information to browser)
- Device Statics on Settings Page
- Restoring User Data (restoring large backups can take a while because we are sending user data to ESP one by one and waiting 100ms each time to make sure ESP can handle it)
- Branding (Copyright symbol is dropped, feel free to use this project as you want) See License
- Refresh page after saving settings. @rneurink
- Captive Portal for easy first setup. @rneurink
- Long-time-missing the "Remove" button. (Initialy we were getting always valid UID but now things were changed)
- Administrator Password setting.
- Basic Backup / Restore facility. (For now we can only restore settings not the Users)
- Settings Page shows "... WebSocket connecting" message even if the connection was made
- Quirk in Sorting User List
- Config File now is more human readable.
- SPIFFS Update from Web (we will likely be able to update it directly from Internet)
- Now you can select Wi-Fi mode.
- Some fixes (features) were not included in previous release
- NTPClient wastes CPU time when device is in AP mode. (probably tries to force update time)
- Relay Module configuration in Settings Page (You need to make sure how the relay module reacts when device is restarting or on power-on, make changes accordingly). I may try to make it more universal, but for now it's up to you.
- Relay Test Button
- Ability to Add known PICC to User List (useful to add new PICC to device when device is already deployed)
- We do not need hardware reset anymore this frees a GPIO from MCU. (suggested by @farthinder #6 )
- User List table now automaticly sorted by Name
- Click on an any element on User List to edit via Add / Update User
- User List actions are instantly happens on the ESP hardware.
- Javascript functions (As suggested from JSHint and Codacy)
- Run a test where 100 seperate User can be handled (see https://github.com/omersiar/esp-rfid#tests)
- Simple Firmware Update from settings page
- SPIFFS Update from settings page
- Now you can define a user name (or any label) for each PICC
- Now each PICC can be individually configured for access (before this, every known PICC had an access)
- Logging In Authorization is now done via Async XMR Request. Browsers does not complain about it being synchronous anymore. (Tested with Chrome and Firefox)
- Inform web user while pages are loading https://www.nngroup.com/articles/response-times-3-important-limits/
- Configuration rutine
- Seperate settings page and Users specific page
- Appending ChipID to hostname
- RFID Hardware Pin and Gain settings via Web
- New WebSocket commands and better command scheme
- can not fallback to AP Mode if configuration file is missing/corrupt
- Seperate Javascript file
- Refactor settings page
- Refactor Fall Back to AP Mode behaviour
- Rafactor configuration file structure
- Web page files now have support for mobile devices and as well as PCs
- Jumbotron CSS
- 'Settings' Menu - (and some snippets)
- Wi-Fi Client Settings can now be configured via Web
- STA - AP Mode behaviour is improved
- Minor changes
- Initial public upload
- Code is now heavily commented