Skip to content

Latest commit

 

History

History
173 lines (117 loc) · 8.74 KB

MSBuildIntegration.md

File metadata and controls

173 lines (117 loc) · 8.74 KB
Raw

Coverlet Integration with MSBuild

In this mode, Coverlet doesn't require any additional setup other than including the NuGet package in the unit test project. It integrates with the dotnet test infrastructure built into the .NET Core CLI and when enabled, will automatically generate coverage results after tests are run.

If a property takes multiple comma-separated values please note that you will have to add escaped quotes around the string like this: /p:Exclude=\"[coverlet.*]*,[*]Coverlet.Core*\", /p:Include=\"[coverlet.*]*,[*]Coverlet.Core*\", or /p:CoverletOutputFormat=\"json,opencover\".

Code Coverage

Enabling code coverage is as simple as setting the CollectCoverage property to true

dotnet test /p:CollectCoverage=true

After the above command is run, a coverage.json file containing the results will be generated in the root directory of the test project. A summary of the results will also be displayed in the terminal.

Coverage Output

Coverlet can generate coverage results in multiple formats, which is specified using the CoverletOutputFormat property. For example, the following command emits coverage results in the opencover format:

dotnet test /p:CollectCoverage=true /p:CoverletOutputFormat=opencover

Supported Formats:

  • json (default)
  • lcov
  • opencover
  • cobertura
  • teamcity

You can specify multiple output formats by separating them with a comma (,).

The output of the coverage result can be specified using the CoverletOutput property.

dotnet test /p:CollectCoverage=true /p:CoverletOutput='./result.json'

To specify a directory where all results will be written to (especially if using multiple formats), end the value with a /.

dotnet test /p:CollectCoverage=true /p:CoverletOutput='./results/'

TeamCity Output

Coverlet can output basic code coverage statistics using TeamCity service messages.

dotnet test /p:CollectCoverage=true /p:CoverletOutputFormat=teamcity

The currently supported TeamCity statistics are:

TeamCity Statistic Key Description
CodeCoverageL Line-level code coverage
CodeCoverageB Branch-level code coverage
CodeCoverageM Method-level code coverage
CodeCoverageAbsLTotal The total number of lines
CodeCoverageAbsLCovered The number of covered lines
CodeCoverageAbsBTotal The total number of branches
CodeCoverageAbsBCovered The number of covered branches
CodeCoverageAbsMTotal The total number of methods
CodeCoverageAbsMCovered The number of covered methods

Merging Results

With Coverlet you can combine the output of multiple coverage runs into a single result.

dotnet test /p:CollectCoverage=true /p:MergeWith='/path/to/result.json'

The value given to /p:MergeWith must be a path to Coverlet's own json result format. The results in result.json will be read, and added to the new results written to by Coverlet.
Check the sample.

Threshold

Coverlet allows you to specify a coverage threshold below which it fails the build. This allows you to enforce a minimum coverage percent on all changes to your project.

dotnet test /p:CollectCoverage=true /p:Threshold=80

The above command will automatically fail the build if the line, branch or method coverage of any of the instrumented modules falls below 80%. You can specify what type of coverage to apply the threshold value to using the ThresholdType property. For example to apply the threshold check to only line coverage:

dotnet test /p:CollectCoverage=true /p:Threshold=80 /p:ThresholdType=line

You can specify multiple values for ThresholdType by separating them with commas. Valid values include line, branch and method.

By default, Coverlet will validate the threshold value against the coverage result of each module. The /p:ThresholdStat option allows you to change this behaviour and can have any of the following values:

  • Minimum (Default): Ensures the coverage result of each module isn't less than the threshold
  • Total: Ensures the total combined coverage result of all modules isn't less than the threshold
  • Average: Ensures the average coverage result of all modules isn't less than the threshold

The following command will compare the threshold value with the overall total coverage of all modules:

dotnet test /p:CollectCoverage=true /p:Threshold=80 /p:ThresholdType=line /p:ThresholdStat=total

Excluding From Coverage

Attributes

You can ignore a method or an entire class from code coverage by creating and applying the ExcludeFromCodeCoverage attribute present in the System.Diagnostics.CodeAnalysis namespace.

You can also ignore additional attributes by using the ExcludeByAttribute property (short name or full name supported):

dotnet test /p:CollectCoverage=true /p:ExcludeByAttribute="Obsolete,GeneratedCodeAttribute,CompilerGeneratedAttribute"

Source Files

You can also ignore specific source files from code coverage using the ExcludeByFile property

  • Use single or multiple paths (separate by comma)
  • Use absolute or relative paths (relative to the project directory)
  • Use file path or directory path with globbing (e.g dir1/*.cs)
dotnet test /p:CollectCoverage=true /p:ExcludeByFile=\"../dir1/class1.cs,../dir2/*.cs,../dir3/**/*.cs\"

Filters

Coverlet gives the ability to have fine grained control over what gets excluded using "filter expressions".

Syntax: /p:Exclude=[Assembly-Filter]Type-Filter

Wildcards

  • * => matches zero or more characters
  • ? => the prefixed character is optional

Examples

  • /p:Exclude="[*]*" => Excludes all types in all assemblies (nothing is instrumented)
  • /p:Exclude="[coverlet.*]Coverlet.Core.Coverage" => Excludes the Coverage class in the Coverlet.Core namespace belonging to any assembly that matches coverlet.* (e.g coverlet.core)
  • /p:Exclude="[*]Coverlet.Core.Instrumentation.*" => Excludes all types belonging to Coverlet.Core.Instrumentation namespace in any assembly
  • /p:Exclude="[coverlet.*.tests?]*" => Excludes all types in any assembly starting with coverlet. and ending with .test or .tests (the ? makes the s optional)
  • /p:Exclude=\"[coverlet.*]*,[*]Coverlet.Core*\" => Excludes assemblies matching coverlet.* and excludes all types belonging to the Coverlet.Core namespace in any assembly
dotnet test /p:CollectCoverage=true /p:Exclude="[coverlet.*]Coverlet.Core.Coverage"

Coverlet goes a step in the other direction by also letting you explicitly set what can be included using the Include property.

Examples

  • /p:Include="[*]*" => Includes all types in all assemblies (everything is instrumented)
  • /p:Include="[coverlet.*]Coverlet.Core.Coverage" => Includes the Coverage class in the Coverlet.Core namespace belonging to any assembly that matches coverlet.* (e.g coverlet.core)
  • /p:Include="[coverlet.*.tests?]*" => Includes all types in any assembly starting with coverlet. and ending with .test or .tests (the ? makes the s optional)

Both Exclude and Include properties can be used together but Exclude takes precedence. You can specify multiple filter expressions by separting them with a comma (,).

You can also include coverage of the test assembly itself by setting /p:IncludeTestAssembly to true.

Note for Powershell / VSTS users

To exclude or include multiple assemblies when using Powershell scripts or creating a .yaml file for a VSTS build %2c should be used as a separator. Msbuild will translate this symbol to ,.

/p:Exclude="[*]*Examples?%2c[*]*Startup"

VSTS builds do not require double quotes to be unescaped:

dotnet test --configuration $(buildConfiguration) --no-build /p:CollectCoverage=true /p:CoverletOutputFormat=cobertura /p:CoverletOutput=$(Build.SourcesDirectory)/TestResults/Coverage/ /p:Exclude="[MyAppName.DebugHost]*%2c[MyAppNamet.WebHost]*%2c[MyAppName.App]*"

SourceLink

Coverlet supports SourceLink custom debug information contained in PDBs. When you specify the --use-source-link flag in the global tool or /p:UseSourceLink=true property in the MSBuild command, Coverlet will generate results that contain the URL to the source files in your source control instead of absolute file paths.