Request for adapters table on doc

[Essetekip]

Hello, in the documentation or other, would it be possible to make a table with the tested and recommended power supplies? Especially for USB PD adapters and cables, the most used at least

[discip]

What about:

UGREEN 65W GaN Charger

Works great so far!

[River-Mochi]

the Pine64 Pinecil Wiki has an entire article dedicated to different power supplies
https://wiki.pine64.org/wiki/Pinecil_Power_Supplies

however each iron uses different chargers. for example the EPR PD3.1, 28V-140w chargers, only the Pinecil V2 can use the 28V on that usb-C charger. other Irons, people would have to drop to a simple PD60 or PD100 cable to use that same class of 28V usb-C charger.

@Essetekip perhaps you could make a document in the IronOS wiki pages just for the specific irons that you are testing chargers on and list? There is also a Discussions topic on chargers where people add in chargers they use for different irons but as each iron has different Specs, it would have to be separated by Iron brand/model.

For Pinecil from Pine64, there is a dedicated wiki that is robust and detailed and no point copying the whole thing over to here. most people with Pinecils at least just go to Pinecil Wiki pages. That one article is just onthe Power supplies, there is another complete article just on Pinecil Cartridge tips
Other issue is sometimes links to chargers go bad, meaning they are no longer sold. That is why the Pinecil Wiki pages also gives specific ratings people should look for in buying a good performance charger rather than just links alone.

As this is IronOS firmware, and not the hardware side, the Pinecil Wiki is kept separate.

[River-Mochi]

I'm not sure this is an Issue Ticket and perhaps more Discussion.

@Essetekip you might want to close this ticket or transfer it over to discussions which may be more appropriate.