BluetoothCommandError

[paulsonmathew21]

Hi,

I could not succeed performing the ble mitm using mirage due to BluetoothCommandError. Please have a look at the attachment which contains the terminal output.

mirage.txt

[RCayre]

Hi,
can you give me more details about the BT dongle you are trying to use ? model, manufacturer, etc.

[paulsonmathew21]

Hi,
That was the dongle issue,and using both CSR4.0 dongles solved the issue. Previously I was using CSR 4.0 and 5.0 dongles. Now its connecting to the slave and cloned it successfully. However, the tool is now throwing a different issue when the master is connected. Could you please have a look at the attachment? I was feeding the LTK also as an input parameter this time.

mirage.txt

[RCayre]

Hi, can you monitor the HCI commands / events using hcidump (on the two dongles) when the error occurs ?

[paulsonmathew21]

Hi RCayre/mirage, Apologies for the delayed response. I have tried with both microbit and csr5.0 dongles to perform active MiTM. With csr 4.0, all the required steps were happening, but the tool exists/terminates automatically when the active mitm mode starts. I couldn't even reach the active mitm stage with the other two dongles. I was feeding in the LTK as an input during the experiment. I will collect the hci dump and push it to you at the earliest.

…

On Tue, Feb 23, 2021, 10:28 PM Romain Cayre ***@***.***> wrote: Hi, can you monitor the HCI commands / events using hcidump (on the two dongles) when the error occurs ? — You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub <#18 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ADKFJBMNEYIZOXOGKVGMC4TTAQTYLANCNFSM4WVDADLQ> .