diff --git a/Makefile.in b/Makefile.in new file mode 100644 index 0000000..8b436ad --- /dev/null +++ b/Makefile.in @@ -0,0 +1,17 @@ +srcdir = @srcdir@ +VPATH = @srcdir@ +STUBS = @STUBS@ +prefix = @prefix@ + +stubs: $(STUBS) + mkdir -p stubs + for i in $(STUBS); do cp -p $$i/* stubs/; done + +install: stubs + mkdir -p $(DESTDIR)/$(prefix)/lib/pkgconfig + cp -p stubs/* $(DESTDIR)/$(prefix)/lib/pkgconfig + +clean: + rm -rf stubs + +.PHONY: all install clean diff --git a/config.guess b/config.guess new file mode 100755 index 0000000..cdfc439 --- /dev/null +++ b/config.guess @@ -0,0 +1,1807 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright 1992-2023 Free Software Foundation, Inc. + +# shellcheck disable=SC2006,SC2268 # see below for rationale + +timestamp='2023-08-22' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, see . +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that +# program. This Exception is an additional permission under section 7 +# of the GNU General Public License, version 3 ("GPLv3"). +# +# Originally written by Per Bothner; maintained since 2000 by Ben Elliston. +# +# You can get the latest version of this script from: +# https://git.savannah.gnu.org/cgit/config.git/plain/config.guess +# +# Please send patches to . + + +# The "shellcheck disable" line above the timestamp inhibits complaints +# about features and limitations of the classic Bourne shell that were +# superseded or lifted in POSIX. However, this script identifies a wide +# variety of pre-POSIX systems that do not have POSIX shells at all, and +# even some reasonably current systems (Solaris 10 as case-in-point) still +# have a pre-POSIX /bin/sh. + + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system '$me' is run on. + +Options: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright 1992-2023 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try '$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +# Just in case it came from the environment. +GUESS= + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, 'CC_FOR_BUILD' used to be named 'HOST_CC'. We still +# use 'HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +tmp= +# shellcheck disable=SC2172 +trap 'test -z "$tmp" || rm -fr "$tmp"' 0 1 2 13 15 + +set_cc_for_build() { + # prevent multiple calls if $tmp is already set + test "$tmp" && return 0 + : "${TMPDIR=/tmp}" + # shellcheck disable=SC2039,SC3028 + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir "$tmp" 2>/dev/null) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir "$tmp" 2>/dev/null) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } + dummy=$tmp/dummy + case ${CC_FOR_BUILD-},${HOST_CC-},${CC-} in + ,,) echo "int x;" > "$dummy.c" + for driver in cc gcc c89 c99 ; do + if ($driver -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then + CC_FOR_BUILD=$driver + break + fi + done + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; + esac +} + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if test -f /.attbin/uname ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +case $UNAME_SYSTEM in +Linux|GNU|GNU/*) + LIBC=unknown + + set_cc_for_build + cat <<-EOF > "$dummy.c" + #if defined(__ANDROID__) + LIBC=android + #else + #include + #if defined(__UCLIBC__) + LIBC=uclibc + #elif defined(__dietlibc__) + LIBC=dietlibc + #elif defined(__GLIBC__) + LIBC=gnu + #else + #include + /* First heuristic to detect musl libc. */ + #ifdef __DEFINED_va_list + LIBC=musl + #endif + #endif + #endif + EOF + cc_set_libc=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'` + eval "$cc_set_libc" + + # Second heuristic to detect musl libc. + if [ "$LIBC" = unknown ] && + command -v ldd >/dev/null && + ldd --version 2>&1 | grep -q ^musl; then + LIBC=musl + fi + + # If the system lacks a compiler, then just pick glibc. + # We could probably try harder. + if [ "$LIBC" = unknown ]; then + LIBC=gnu + fi + ;; +esac + +# Note: order is significant - the case branches are not exclusive. + +case $UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \ + /sbin/sysctl -n hw.machine_arch 2>/dev/null || \ + /usr/sbin/sysctl -n hw.machine_arch 2>/dev/null || \ + echo unknown)` + case $UNAME_MACHINE_ARCH in + aarch64eb) machine=aarch64_be-unknown ;; + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; + earmv*) + arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'` + endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'` + machine=${arch}${endian}-unknown + ;; + *) machine=$UNAME_MACHINE_ARCH-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently (or will in the future) and ABI. + case $UNAME_MACHINE_ARCH in + earm*) + os=netbsdelf + ;; + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ELF__ + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # Determine ABI tags. + case $UNAME_MACHINE_ARCH in + earm*) + expr='s/^earmv[0-9]/-eabi/;s/eb$//' + abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"` + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case $UNAME_VERSION in + Debian*) + release='-gnu' + ;; + *) + release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + GUESS=$machine-${os}${release}${abi-} + ;; + *:Bitrig:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` + GUESS=$UNAME_MACHINE_ARCH-unknown-bitrig$UNAME_RELEASE + ;; + *:OpenBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + GUESS=$UNAME_MACHINE_ARCH-unknown-openbsd$UNAME_RELEASE + ;; + *:SecBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/SecBSD.//'` + GUESS=$UNAME_MACHINE_ARCH-unknown-secbsd$UNAME_RELEASE + ;; + *:LibertyBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'` + GUESS=$UNAME_MACHINE_ARCH-unknown-libertybsd$UNAME_RELEASE + ;; + *:MidnightBSD:*:*) + GUESS=$UNAME_MACHINE-unknown-midnightbsd$UNAME_RELEASE + ;; + *:ekkoBSD:*:*) + GUESS=$UNAME_MACHINE-unknown-ekkobsd$UNAME_RELEASE + ;; + *:SolidBSD:*:*) + GUESS=$UNAME_MACHINE-unknown-solidbsd$UNAME_RELEASE + ;; + *:OS108:*:*) + GUESS=$UNAME_MACHINE-unknown-os108_$UNAME_RELEASE + ;; + macppc:MirBSD:*:*) + GUESS=powerpc-unknown-mirbsd$UNAME_RELEASE + ;; + *:MirBSD:*:*) + GUESS=$UNAME_MACHINE-unknown-mirbsd$UNAME_RELEASE + ;; + *:Sortix:*:*) + GUESS=$UNAME_MACHINE-unknown-sortix + ;; + *:Twizzler:*:*) + GUESS=$UNAME_MACHINE-unknown-twizzler + ;; + *:Redox:*:*) + GUESS=$UNAME_MACHINE-unknown-redox + ;; + mips:OSF1:*.*) + GUESS=mips-dec-osf1 + ;; + alpha:OSF1:*:*) + # Reset EXIT trap before exiting to avoid spurious non-zero exit code. + trap '' 0 + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case $ALPHA_CPU_TYPE in + "EV4 (21064)") + UNAME_MACHINE=alpha ;; + "EV4.5 (21064)") + UNAME_MACHINE=alpha ;; + "LCA4 (21066/21068)") + UNAME_MACHINE=alpha ;; + "EV5 (21164)") + UNAME_MACHINE=alphaev5 ;; + "EV5.6 (21164A)") + UNAME_MACHINE=alphaev56 ;; + "EV5.6 (21164PC)") + UNAME_MACHINE=alphapca56 ;; + "EV5.7 (21164PC)") + UNAME_MACHINE=alphapca57 ;; + "EV6 (21264)") + UNAME_MACHINE=alphaev6 ;; + "EV6.7 (21264A)") + UNAME_MACHINE=alphaev67 ;; + "EV6.8CB (21264C)") + UNAME_MACHINE=alphaev68 ;; + "EV6.8AL (21264B)") + UNAME_MACHINE=alphaev68 ;; + "EV6.8CX (21264D)") + UNAME_MACHINE=alphaev68 ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE=alphaev69 ;; + "EV7 (21364)") + UNAME_MACHINE=alphaev7 ;; + "EV7.9 (21364A)") + UNAME_MACHINE=alphaev79 ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + OSF_REL=`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` + GUESS=$UNAME_MACHINE-dec-osf$OSF_REL + ;; + Amiga*:UNIX_System_V:4.0:*) + GUESS=m68k-unknown-sysv4 + ;; + *:[Aa]miga[Oo][Ss]:*:*) + GUESS=$UNAME_MACHINE-unknown-amigaos + ;; + *:[Mm]orph[Oo][Ss]:*:*) + GUESS=$UNAME_MACHINE-unknown-morphos + ;; + *:OS/390:*:*) + GUESS=i370-ibm-openedition + ;; + *:z/VM:*:*) + GUESS=s390-ibm-zvmoe + ;; + *:OS400:*:*) + GUESS=powerpc-ibm-os400 + ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + GUESS=arm-acorn-riscix$UNAME_RELEASE + ;; + arm*:riscos:*:*|arm*:RISCOS:*:*) + GUESS=arm-unknown-riscos + ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + GUESS=hppa1.1-hitachi-hiuxmpp + ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + case `(/bin/universe) 2>/dev/null` in + att) GUESS=pyramid-pyramid-sysv3 ;; + *) GUESS=pyramid-pyramid-bsd ;; + esac + ;; + NILE*:*:*:dcosx) + GUESS=pyramid-pyramid-svr4 + ;; + DRS?6000:unix:4.0:6*) + GUESS=sparc-icl-nx6 + ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) GUESS=sparc-icl-nx7 ;; + esac + ;; + s390x:SunOS:*:*) + SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'` + GUESS=$UNAME_MACHINE-ibm-solaris2$SUN_REL + ;; + sun4H:SunOS:5.*:*) + SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'` + GUESS=sparc-hal-solaris2$SUN_REL + ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'` + GUESS=sparc-sun-solaris2$SUN_REL + ;; + i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) + GUESS=i386-pc-auroraux$UNAME_RELEASE + ;; + i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) + set_cc_for_build + SUN_ARCH=i386 + # If there is a compiler, see if it is configured for 64-bit objects. + # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. + # This test works for both compilers. + if test "$CC_FOR_BUILD" != no_compiler_found; then + if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS="" $CC_FOR_BUILD -m64 -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + SUN_ARCH=x86_64 + fi + fi + SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'` + GUESS=$SUN_ARCH-pc-solaris2$SUN_REL + ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'` + GUESS=sparc-sun-solaris3$SUN_REL + ;; + sun4*:SunOS:*:*) + case `/usr/bin/arch -k` in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like '4.1.3-JL'. + SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/-/_/'` + GUESS=sparc-sun-sunos$SUN_REL + ;; + sun3*:SunOS:*:*) + GUESS=m68k-sun-sunos$UNAME_RELEASE + ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3 + case `/bin/arch` in + sun3) + GUESS=m68k-sun-sunos$UNAME_RELEASE + ;; + sun4) + GUESS=sparc-sun-sunos$UNAME_RELEASE + ;; + esac + ;; + aushp:SunOS:*:*) + GUESS=sparc-auspex-sunos$UNAME_RELEASE + ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + GUESS=m68k-atari-mint$UNAME_RELEASE + ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + GUESS=m68k-atari-mint$UNAME_RELEASE + ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + GUESS=m68k-atari-mint$UNAME_RELEASE + ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + GUESS=m68k-milan-mint$UNAME_RELEASE + ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + GUESS=m68k-hades-mint$UNAME_RELEASE + ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + GUESS=m68k-unknown-mint$UNAME_RELEASE + ;; + m68k:machten:*:*) + GUESS=m68k-apple-machten$UNAME_RELEASE + ;; + powerpc:machten:*:*) + GUESS=powerpc-apple-machten$UNAME_RELEASE + ;; + RISC*:Mach:*:*) + GUESS=mips-dec-mach_bsd4.3 + ;; + RISC*:ULTRIX:*:*) + GUESS=mips-dec-ultrix$UNAME_RELEASE + ;; + VAX*:ULTRIX*:*:*) + GUESS=vax-dec-ultrix$UNAME_RELEASE + ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + GUESS=clipper-intergraph-clix$UNAME_RELEASE + ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + set_cc_for_build + sed 's/^ //' << EOF > "$dummy.c" +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o "$dummy" "$dummy.c" && + dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`"$dummy" "$dummyarg"` && + { echo "$SYSTEM_NAME"; exit; } + GUESS=mips-mips-riscos$UNAME_RELEASE + ;; + Motorola:PowerMAX_OS:*:*) + GUESS=powerpc-motorola-powermax + ;; + Motorola:*:4.3:PL8-*) + GUESS=powerpc-harris-powermax + ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + GUESS=powerpc-harris-powermax + ;; + Night_Hawk:Power_UNIX:*:*) + GUESS=powerpc-harris-powerunix + ;; + m88k:CX/UX:7*:*) + GUESS=m88k-harris-cxux7 + ;; + m88k:*:4*:R4*) + GUESS=m88k-motorola-sysv4 + ;; + m88k:*:3*:R3*) + GUESS=m88k-motorola-sysv3 + ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if test "$UNAME_PROCESSOR" = mc88100 || test "$UNAME_PROCESSOR" = mc88110 + then + if test "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx || \ + test "$TARGET_BINARY_INTERFACE"x = x + then + GUESS=m88k-dg-dgux$UNAME_RELEASE + else + GUESS=m88k-dg-dguxbcs$UNAME_RELEASE + fi + else + GUESS=i586-dg-dgux$UNAME_RELEASE + fi + ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + GUESS=m88k-dolphin-sysv3 + ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + GUESS=m88k-motorola-sysv3 + ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + GUESS=m88k-tektronix-sysv3 + ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + GUESS=m68k-tektronix-bsd + ;; + *:IRIX*:*:*) + IRIX_REL=`echo "$UNAME_RELEASE" | sed -e 's/-/_/g'` + GUESS=mips-sgi-irix$IRIX_REL + ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + GUESS=romp-ibm-aix # uname -m gives an 8 hex-code CPU id + ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + GUESS=i386-ibm-aix + ;; + ia64:AIX:*:*) + if test -x /usr/bin/oslevel ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=$UNAME_VERSION.$UNAME_RELEASE + fi + GUESS=$UNAME_MACHINE-ibm-aix$IBM_REV + ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + set_cc_for_build + sed 's/^ //' << EOF > "$dummy.c" + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` + then + GUESS=$SYSTEM_NAME + else + GUESS=rs6000-ibm-aix3.2.5 + fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + GUESS=rs6000-ibm-aix3.2.4 + else + GUESS=rs6000-ibm-aix3.2 + fi + ;; + *:AIX:*:[4567]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if test -x /usr/bin/lslpp ; then + IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | \ + awk -F: '{ print $3 }' | sed s/[0-9]*$/0/` + else + IBM_REV=$UNAME_VERSION.$UNAME_RELEASE + fi + GUESS=$IBM_ARCH-ibm-aix$IBM_REV + ;; + *:AIX:*:*) + GUESS=rs6000-ibm-aix + ;; + ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*) + GUESS=romp-ibm-bsd4.4 + ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + GUESS=romp-ibm-bsd$UNAME_RELEASE # 4.3 with uname added to + ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + GUESS=rs6000-bull-bosx + ;; + DPX/2?00:B.O.S.:*:*) + GUESS=m68k-bull-sysv3 + ;; + 9000/[34]??:4.3bsd:1.*:*) + GUESS=m68k-hp-bsd + ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + GUESS=m68k-hp-bsd4.4 + ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*.[0B]*//'` + case $UNAME_MACHINE in + 9000/31?) HP_ARCH=m68000 ;; + 9000/[34]??) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if test -x /usr/bin/getconf; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case $sc_cpu_version in + 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0 + 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case $sc_kernel_bits in + 32) HP_ARCH=hppa2.0n ;; + 64) HP_ARCH=hppa2.0w ;; + '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20 + esac ;; + esac + fi + if test "$HP_ARCH" = ""; then + set_cc_for_build + sed 's/^ //' << EOF > "$dummy.c" + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if test "$HP_ARCH" = hppa2.0w + then + set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | + grep -q __LP64__ + then + HP_ARCH=hppa2.0w + else + HP_ARCH=hppa64 + fi + fi + GUESS=$HP_ARCH-hp-hpux$HPUX_REV + ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*.[0B]*//'` + GUESS=ia64-hp-hpux$HPUX_REV + ;; + 3050*:HI-UX:*:*) + set_cc_for_build + sed 's/^ //' << EOF > "$dummy.c" + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` && + { echo "$SYSTEM_NAME"; exit; } + GUESS=unknown-hitachi-hiuxwe2 + ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*) + GUESS=hppa1.1-hp-bsd + ;; + 9000/8??:4.3bsd:*:*) + GUESS=hppa1.0-hp-bsd + ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + GUESS=hppa1.0-hp-mpeix + ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*) + GUESS=hppa1.1-hp-osf + ;; + hp8??:OSF1:*:*) + GUESS=hppa1.0-hp-osf + ;; + i*86:OSF1:*:*) + if test -x /usr/sbin/sysversion ; then + GUESS=$UNAME_MACHINE-unknown-osf1mk + else + GUESS=$UNAME_MACHINE-unknown-osf1 + fi + ;; + parisc*:Lites*:*:*) + GUESS=hppa1.1-hp-lites + ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + GUESS=c1-convex-bsd + ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + GUESS=c34-convex-bsd + ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + GUESS=c38-convex-bsd + ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + GUESS=c4-convex-bsd + ;; + CRAY*Y-MP:*:*:*) + CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'` + GUESS=ymp-cray-unicos$CRAY_REL + ;; + CRAY*[A-Z]90:*:*:*) + echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*TS:*:*:*) + CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'` + GUESS=t90-cray-unicos$CRAY_REL + ;; + CRAY*T3E:*:*:*) + CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'` + GUESS=alphaev5-cray-unicosmk$CRAY_REL + ;; + CRAY*SV1:*:*:*) + CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'` + GUESS=sv1-cray-unicos$CRAY_REL + ;; + *:UNICOS/mp:*:*) + CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'` + GUESS=craynv-cray-unicosmp$CRAY_REL + ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` + FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` + FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'` + GUESS=${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL} + ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` + FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'` + GUESS=sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL} + ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + GUESS=$UNAME_MACHINE-pc-bsdi$UNAME_RELEASE + ;; + sparc*:BSD/OS:*:*) + GUESS=sparc-unknown-bsdi$UNAME_RELEASE + ;; + *:BSD/OS:*:*) + GUESS=$UNAME_MACHINE-unknown-bsdi$UNAME_RELEASE + ;; + arm:FreeBSD:*:*) + UNAME_PROCESSOR=`uname -p` + set_cc_for_build + if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_PCS_VFP + then + FREEBSD_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'` + GUESS=$UNAME_PROCESSOR-unknown-freebsd$FREEBSD_REL-gnueabi + else + FREEBSD_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'` + GUESS=$UNAME_PROCESSOR-unknown-freebsd$FREEBSD_REL-gnueabihf + fi + ;; + *:FreeBSD:*:*) + UNAME_PROCESSOR=`uname -p` + case $UNAME_PROCESSOR in + amd64) + UNAME_PROCESSOR=x86_64 ;; + i386) + UNAME_PROCESSOR=i586 ;; + esac + FREEBSD_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'` + GUESS=$UNAME_PROCESSOR-unknown-freebsd$FREEBSD_REL + ;; + i*:CYGWIN*:*) + GUESS=$UNAME_MACHINE-pc-cygwin + ;; + *:MINGW64*:*) + GUESS=$UNAME_MACHINE-pc-mingw64 + ;; + *:MINGW*:*) + GUESS=$UNAME_MACHINE-pc-mingw32 + ;; + *:MSYS*:*) + GUESS=$UNAME_MACHINE-pc-msys + ;; + i*:PW*:*) + GUESS=$UNAME_MACHINE-pc-pw32 + ;; + *:SerenityOS:*:*) + GUESS=$UNAME_MACHINE-pc-serenity + ;; + *:Interix*:*) + case $UNAME_MACHINE in + x86) + GUESS=i586-pc-interix$UNAME_RELEASE + ;; + authenticamd | genuineintel | EM64T) + GUESS=x86_64-unknown-interix$UNAME_RELEASE + ;; + IA64) + GUESS=ia64-unknown-interix$UNAME_RELEASE + ;; + esac ;; + i*:UWIN*:*) + GUESS=$UNAME_MACHINE-pc-uwin + ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + GUESS=x86_64-pc-cygwin + ;; + prep*:SunOS:5.*:*) + SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'` + GUESS=powerpcle-unknown-solaris2$SUN_REL + ;; + *:GNU:*:*) + # the GNU system + GNU_ARCH=`echo "$UNAME_MACHINE" | sed -e 's,[-/].*$,,'` + GNU_REL=`echo "$UNAME_RELEASE" | sed -e 's,/.*$,,'` + GUESS=$GNU_ARCH-unknown-$LIBC$GNU_REL + ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + GNU_SYS=`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"` + GNU_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'` + GUESS=$UNAME_MACHINE-unknown-$GNU_SYS$GNU_REL-$LIBC + ;; + x86_64:[Mm]anagarm:*:*|i?86:[Mm]anagarm:*:*) + GUESS="$UNAME_MACHINE-pc-managarm-mlibc" + ;; + *:[Mm]anagarm:*:*) + GUESS="$UNAME_MACHINE-unknown-managarm-mlibc" + ;; + *:Minix:*:*) + GUESS=$UNAME_MACHINE-unknown-minix + ;; + aarch64:Linux:*:*) + set_cc_for_build + CPU=$UNAME_MACHINE + LIBCABI=$LIBC + if test "$CC_FOR_BUILD" != no_compiler_found; then + ABI=64 + sed 's/^ //' << EOF > "$dummy.c" + #ifdef __ARM_EABI__ + #ifdef __ARM_PCS_VFP + ABI=eabihf + #else + ABI=eabi + #endif + #endif +EOF + cc_set_abi=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^ABI' | sed 's, ,,g'` + eval "$cc_set_abi" + case $ABI in + eabi | eabihf) CPU=armv8l; LIBCABI=$LIBC$ABI ;; + esac + fi + GUESS=$CPU-unknown-linux-$LIBCABI + ;; + aarch64_be:Linux:*:*) + UNAME_MACHINE=aarch64_be + GUESS=$UNAME_MACHINE-unknown-linux-$LIBC + ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' /proc/cpuinfo 2>/dev/null` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep -q ld.so.1 + if test "$?" = 0 ; then LIBC=gnulibc1 ; fi + GUESS=$UNAME_MACHINE-unknown-linux-$LIBC + ;; + arc:Linux:*:* | arceb:Linux:*:* | arc32:Linux:*:* | arc64:Linux:*:*) + GUESS=$UNAME_MACHINE-unknown-linux-$LIBC + ;; + arm*:Linux:*:*) + set_cc_for_build + if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_EABI__ + then + GUESS=$UNAME_MACHINE-unknown-linux-$LIBC + else + if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_PCS_VFP + then + GUESS=$UNAME_MACHINE-unknown-linux-${LIBC}eabi + else + GUESS=$UNAME_MACHINE-unknown-linux-${LIBC}eabihf + fi + fi + ;; + avr32*:Linux:*:*) + GUESS=$UNAME_MACHINE-unknown-linux-$LIBC + ;; + cris:Linux:*:*) + GUESS=$UNAME_MACHINE-axis-linux-$LIBC + ;; + crisv32:Linux:*:*) + GUESS=$UNAME_MACHINE-axis-linux-$LIBC + ;; + e2k:Linux:*:*) + GUESS=$UNAME_MACHINE-unknown-linux-$LIBC + ;; + frv:Linux:*:*) + GUESS=$UNAME_MACHINE-unknown-linux-$LIBC + ;; + hexagon:Linux:*:*) + GUESS=$UNAME_MACHINE-unknown-linux-$LIBC + ;; + i*86:Linux:*:*) + GUESS=$UNAME_MACHINE-pc-linux-$LIBC + ;; + ia64:Linux:*:*) + GUESS=$UNAME_MACHINE-unknown-linux-$LIBC + ;; + k1om:Linux:*:*) + GUESS=$UNAME_MACHINE-unknown-linux-$LIBC + ;; + kvx:Linux:*:*) + GUESS=$UNAME_MACHINE-unknown-linux-$LIBC + ;; + kvx:cos:*:*) + GUESS=$UNAME_MACHINE-unknown-cos + ;; + kvx:mbr:*:*) + GUESS=$UNAME_MACHINE-unknown-mbr + ;; + loongarch32:Linux:*:* | loongarch64:Linux:*:*) + GUESS=$UNAME_MACHINE-unknown-linux-$LIBC + ;; + m32r*:Linux:*:*) + GUESS=$UNAME_MACHINE-unknown-linux-$LIBC + ;; + m68*:Linux:*:*) + GUESS=$UNAME_MACHINE-unknown-linux-$LIBC + ;; + mips:Linux:*:* | mips64:Linux:*:*) + set_cc_for_build + IS_GLIBC=0 + test x"${LIBC}" = xgnu && IS_GLIBC=1 + sed 's/^ //' << EOF > "$dummy.c" + #undef CPU + #undef mips + #undef mipsel + #undef mips64 + #undef mips64el + #if ${IS_GLIBC} && defined(_ABI64) + LIBCABI=gnuabi64 + #else + #if ${IS_GLIBC} && defined(_ABIN32) + LIBCABI=gnuabin32 + #else + LIBCABI=${LIBC} + #endif + #endif + + #if ${IS_GLIBC} && defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6 + CPU=mipsisa64r6 + #else + #if ${IS_GLIBC} && !defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6 + CPU=mipsisa32r6 + #else + #if defined(__mips64) + CPU=mips64 + #else + CPU=mips + #endif + #endif + #endif + + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + MIPS_ENDIAN=el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + MIPS_ENDIAN= + #else + MIPS_ENDIAN= + #endif + #endif +EOF + cc_set_vars=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU\|^MIPS_ENDIAN\|^LIBCABI'` + eval "$cc_set_vars" + test "x$CPU" != x && { echo "$CPU${MIPS_ENDIAN}-unknown-linux-$LIBCABI"; exit; } + ;; + mips64el:Linux:*:*) + GUESS=$UNAME_MACHINE-unknown-linux-$LIBC + ;; + openrisc*:Linux:*:*) + GUESS=or1k-unknown-linux-$LIBC + ;; + or32:Linux:*:* | or1k*:Linux:*:*) + GUESS=$UNAME_MACHINE-unknown-linux-$LIBC + ;; + padre:Linux:*:*) + GUESS=sparc-unknown-linux-$LIBC + ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + GUESS=hppa64-unknown-linux-$LIBC + ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) GUESS=hppa1.1-unknown-linux-$LIBC ;; + PA8*) GUESS=hppa2.0-unknown-linux-$LIBC ;; + *) GUESS=hppa-unknown-linux-$LIBC ;; + esac + ;; + ppc64:Linux:*:*) + GUESS=powerpc64-unknown-linux-$LIBC + ;; + ppc:Linux:*:*) + GUESS=powerpc-unknown-linux-$LIBC + ;; + ppc64le:Linux:*:*) + GUESS=powerpc64le-unknown-linux-$LIBC + ;; + ppcle:Linux:*:*) + GUESS=powerpcle-unknown-linux-$LIBC + ;; + riscv32:Linux:*:* | riscv32be:Linux:*:* | riscv64:Linux:*:* | riscv64be:Linux:*:*) + GUESS=$UNAME_MACHINE-unknown-linux-$LIBC + ;; + s390:Linux:*:* | s390x:Linux:*:*) + GUESS=$UNAME_MACHINE-ibm-linux-$LIBC + ;; + sh64*:Linux:*:*) + GUESS=$UNAME_MACHINE-unknown-linux-$LIBC + ;; + sh*:Linux:*:*) + GUESS=$UNAME_MACHINE-unknown-linux-$LIBC + ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + GUESS=$UNAME_MACHINE-unknown-linux-$LIBC + ;; + tile*:Linux:*:*) + GUESS=$UNAME_MACHINE-unknown-linux-$LIBC + ;; + vax:Linux:*:*) + GUESS=$UNAME_MACHINE-dec-linux-$LIBC + ;; + x86_64:Linux:*:*) + set_cc_for_build + CPU=$UNAME_MACHINE + LIBCABI=$LIBC + if test "$CC_FOR_BUILD" != no_compiler_found; then + ABI=64 + sed 's/^ //' << EOF > "$dummy.c" + #ifdef __i386__ + ABI=x86 + #else + #ifdef __ILP32__ + ABI=x32 + #endif + #endif +EOF + cc_set_abi=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^ABI' | sed 's, ,,g'` + eval "$cc_set_abi" + case $ABI in + x86) CPU=i686 ;; + x32) LIBCABI=${LIBC}x32 ;; + esac + fi + GUESS=$CPU-pc-linux-$LIBCABI + ;; + xtensa*:Linux:*:*) + GUESS=$UNAME_MACHINE-unknown-linux-$LIBC + ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + GUESS=i386-sequent-sysv4 + ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + GUESS=$UNAME_MACHINE-pc-sysv4.2uw$UNAME_VERSION + ;; + i*86:OS/2:*:*) + # If we were able to find 'uname', then EMX Unix compatibility + # is probably installed. + GUESS=$UNAME_MACHINE-pc-os2-emx + ;; + i*86:XTS-300:*:STOP) + GUESS=$UNAME_MACHINE-unknown-stop + ;; + i*86:atheos:*:*) + GUESS=$UNAME_MACHINE-unknown-atheos + ;; + i*86:syllable:*:*) + GUESS=$UNAME_MACHINE-pc-syllable + ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) + GUESS=i386-unknown-lynxos$UNAME_RELEASE + ;; + i*86:*DOS:*:*) + GUESS=$UNAME_MACHINE-pc-msdosdjgpp + ;; + i*86:*:4.*:*) + UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + GUESS=$UNAME_MACHINE-univel-sysv$UNAME_REL + else + GUESS=$UNAME_MACHINE-pc-sysv$UNAME_REL + fi + ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + GUESS=$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + GUESS=$UNAME_MACHINE-pc-sco$UNAME_REL + else + GUESS=$UNAME_MACHINE-pc-sysv32 + fi + ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i586. + # Note: whatever this is, it MUST be the same as what config.sub + # prints for the "djgpp" host, or else GDB configure will decide that + # this is a cross-build. + GUESS=i586-pc-msdosdjgpp + ;; + Intel:Mach:3*:*) + GUESS=i386-pc-mach3 + ;; + paragon:*:*:*) + GUESS=i860-intel-osf1 + ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + GUESS=i860-stardent-sysv$UNAME_RELEASE # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + GUESS=i860-unknown-sysv$UNAME_RELEASE # Unknown i860-SVR4 + fi + ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + GUESS=m68010-convergent-sysv + ;; + mc68k:UNIX:SYSTEM5:3.51m) + GUESS=m68k-convergent-sysv + ;; + M680?0:D-NIX:5.3:*) + GUESS=m68k-diab-dnix + ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + NCR*:*:4.2:* | MPRAS*:*:4.2:*) + OS_REL='.3' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } + /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ + && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + GUESS=m68k-unknown-lynxos$UNAME_RELEASE + ;; + mc68030:UNIX_System_V:4.*:*) + GUESS=m68k-atari-sysv4 + ;; + TSUNAMI:LynxOS:2.*:*) + GUESS=sparc-unknown-lynxos$UNAME_RELEASE + ;; + rs6000:LynxOS:2.*:*) + GUESS=rs6000-unknown-lynxos$UNAME_RELEASE + ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) + GUESS=powerpc-unknown-lynxos$UNAME_RELEASE + ;; + SM[BE]S:UNIX_SV:*:*) + GUESS=mips-dde-sysv$UNAME_RELEASE + ;; + RM*:ReliantUNIX-*:*:*) + GUESS=mips-sni-sysv4 + ;; + RM*:SINIX-*:*:*) + GUESS=mips-sni-sysv4 + ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + GUESS=$UNAME_MACHINE-sni-sysv4 + else + GUESS=ns32k-sni-sysv + fi + ;; + PENTIUM:*:4.0*:*) # Unisys 'ClearPath HMP IX 4000' SVR4/MP effort + # says + GUESS=i586-unisys-sysv4 + ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + GUESS=hppa1.1-stratus-sysv4 + ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + GUESS=i860-stratus-sysv4 + ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + GUESS=$UNAME_MACHINE-stratus-vos + ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + GUESS=hppa1.1-stratus-vos + ;; + mc68*:A/UX:*:*) + GUESS=m68k-apple-aux$UNAME_RELEASE + ;; + news*:NEWS-OS:6*:*) + GUESS=mips-sony-newsos6 + ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if test -d /usr/nec; then + GUESS=mips-nec-sysv$UNAME_RELEASE + else + GUESS=mips-unknown-sysv$UNAME_RELEASE + fi + ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + GUESS=powerpc-be-beos + ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + GUESS=powerpc-apple-beos + ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + GUESS=i586-pc-beos + ;; + BePC:Haiku:*:*) # Haiku running on Intel PC compatible. + GUESS=i586-pc-haiku + ;; + ppc:Haiku:*:*) # Haiku running on Apple PowerPC + GUESS=powerpc-apple-haiku + ;; + *:Haiku:*:*) # Haiku modern gcc (not bound by BeOS compat) + GUESS=$UNAME_MACHINE-unknown-haiku + ;; + SX-4:SUPER-UX:*:*) + GUESS=sx4-nec-superux$UNAME_RELEASE + ;; + SX-5:SUPER-UX:*:*) + GUESS=sx5-nec-superux$UNAME_RELEASE + ;; + SX-6:SUPER-UX:*:*) + GUESS=sx6-nec-superux$UNAME_RELEASE + ;; + SX-7:SUPER-UX:*:*) + GUESS=sx7-nec-superux$UNAME_RELEASE + ;; + SX-8:SUPER-UX:*:*) + GUESS=sx8-nec-superux$UNAME_RELEASE + ;; + SX-8R:SUPER-UX:*:*) + GUESS=sx8r-nec-superux$UNAME_RELEASE + ;; + SX-ACE:SUPER-UX:*:*) + GUESS=sxace-nec-superux$UNAME_RELEASE + ;; + Power*:Rhapsody:*:*) + GUESS=powerpc-apple-rhapsody$UNAME_RELEASE + ;; + *:Rhapsody:*:*) + GUESS=$UNAME_MACHINE-apple-rhapsody$UNAME_RELEASE + ;; + arm64:Darwin:*:*) + GUESS=aarch64-apple-darwin$UNAME_RELEASE + ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` + case $UNAME_PROCESSOR in + unknown) UNAME_PROCESSOR=powerpc ;; + esac + if command -v xcode-select > /dev/null 2> /dev/null && \ + ! xcode-select --print-path > /dev/null 2> /dev/null ; then + # Avoid executing cc if there is no toolchain installed as + # cc will be a stub that puts up a graphical alert + # prompting the user to install developer tools. + CC_FOR_BUILD=no_compiler_found + else + set_cc_for_build + fi + if test "$CC_FOR_BUILD" != no_compiler_found; then + if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + case $UNAME_PROCESSOR in + i386) UNAME_PROCESSOR=x86_64 ;; + powerpc) UNAME_PROCESSOR=powerpc64 ;; + esac + fi + # On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc + if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \ + (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_PPC >/dev/null + then + UNAME_PROCESSOR=powerpc + fi + elif test "$UNAME_PROCESSOR" = i386 ; then + # uname -m returns i386 or x86_64 + UNAME_PROCESSOR=$UNAME_MACHINE + fi + GUESS=$UNAME_PROCESSOR-apple-darwin$UNAME_RELEASE + ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = x86; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + GUESS=$UNAME_PROCESSOR-$UNAME_MACHINE-nto-qnx$UNAME_RELEASE + ;; + *:QNX:*:4*) + GUESS=i386-pc-qnx + ;; + NEO-*:NONSTOP_KERNEL:*:*) + GUESS=neo-tandem-nsk$UNAME_RELEASE + ;; + NSE-*:NONSTOP_KERNEL:*:*) + GUESS=nse-tandem-nsk$UNAME_RELEASE + ;; + NSR-*:NONSTOP_KERNEL:*:*) + GUESS=nsr-tandem-nsk$UNAME_RELEASE + ;; + NSV-*:NONSTOP_KERNEL:*:*) + GUESS=nsv-tandem-nsk$UNAME_RELEASE + ;; + NSX-*:NONSTOP_KERNEL:*:*) + GUESS=nsx-tandem-nsk$UNAME_RELEASE + ;; + *:NonStop-UX:*:*) + GUESS=mips-compaq-nonstopux + ;; + BS2000:POSIX*:*:*) + GUESS=bs2000-siemens-sysv + ;; + DS/*:UNIX_System_V:*:*) + GUESS=$UNAME_MACHINE-$UNAME_SYSTEM-$UNAME_RELEASE + ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "${cputype-}" = 386; then + UNAME_MACHINE=i386 + elif test "x${cputype-}" != x; then + UNAME_MACHINE=$cputype + fi + GUESS=$UNAME_MACHINE-unknown-plan9 + ;; + *:TOPS-10:*:*) + GUESS=pdp10-unknown-tops10 + ;; + *:TENEX:*:*) + GUESS=pdp10-unknown-tenex + ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + GUESS=pdp10-dec-tops20 + ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + GUESS=pdp10-xkl-tops20 + ;; + *:TOPS-20:*:*) + GUESS=pdp10-unknown-tops20 + ;; + *:ITS:*:*) + GUESS=pdp10-unknown-its + ;; + SEI:*:*:SEIUX) + GUESS=mips-sei-seiux$UNAME_RELEASE + ;; + *:DragonFly:*:*) + DRAGONFLY_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'` + GUESS=$UNAME_MACHINE-unknown-dragonfly$DRAGONFLY_REL + ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case $UNAME_MACHINE in + A*) GUESS=alpha-dec-vms ;; + I*) GUESS=ia64-dec-vms ;; + V*) GUESS=vax-dec-vms ;; + esac ;; + *:XENIX:*:SysV) + GUESS=i386-pc-xenix + ;; + i*86:skyos:*:*) + SKYOS_REL=`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'` + GUESS=$UNAME_MACHINE-pc-skyos$SKYOS_REL + ;; + i*86:rdos:*:*) + GUESS=$UNAME_MACHINE-pc-rdos + ;; + i*86:Fiwix:*:*) + GUESS=$UNAME_MACHINE-pc-fiwix + ;; + *:AROS:*:*) + GUESS=$UNAME_MACHINE-unknown-aros + ;; + x86_64:VMkernel:*:*) + GUESS=$UNAME_MACHINE-unknown-esx + ;; + amd64:Isilon\ OneFS:*:*) + GUESS=x86_64-unknown-onefs + ;; + *:Unleashed:*:*) + GUESS=$UNAME_MACHINE-unknown-unleashed$UNAME_RELEASE + ;; +esac + +# Do we have a guess based on uname results? +if test "x$GUESS" != x; then + echo "$GUESS" + exit +fi + +# No uname command or uname output not recognized. +set_cc_for_build +cat > "$dummy.c" < +#include +#endif +#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__) +#if defined (vax) || defined (__vax) || defined (__vax__) || defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__) +#include +#if defined(_SIZE_T_) || defined(SIGLOST) +#include +#endif +#endif +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); +#endif + +#if defined (vax) +#if !defined (ultrix) +#include +#if defined (BSD) +#if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +#else +#if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +#else + printf ("vax-dec-bsd\n"); exit (0); +#endif +#endif +#else + printf ("vax-dec-bsd\n"); exit (0); +#endif +#else +#if defined(_SIZE_T_) || defined(SIGLOST) + struct utsname un; + uname (&un); + printf ("vax-dec-ultrix%s\n", un.release); exit (0); +#else + printf ("vax-dec-ultrix\n"); exit (0); +#endif +#endif +#endif +#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__) +#if defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__) +#if defined(_SIZE_T_) || defined(SIGLOST) + struct utsname *un; + uname (&un); + printf ("mips-dec-ultrix%s\n", un.release); exit (0); +#else + printf ("mips-dec-ultrix\n"); exit (0); +#endif +#endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null && SYSTEM_NAME=`"$dummy"` && + { echo "$SYSTEM_NAME"; exit; } + +# Apollos put the system type in the environment. +test -d /usr/apollo && { echo "$ISP-apollo-$SYSTYPE"; exit; } + +echo "$0: unable to guess system type" >&2 + +case $UNAME_MACHINE:$UNAME_SYSTEM in + mips:Linux | mips64:Linux) + # If we got here on MIPS GNU/Linux, output extra information. + cat >&2 <&2 <&2 </dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = "$UNAME_MACHINE" +UNAME_RELEASE = "$UNAME_RELEASE" +UNAME_SYSTEM = "$UNAME_SYSTEM" +UNAME_VERSION = "$UNAME_VERSION" +EOF +fi + +exit 1 + +# Local variables: +# eval: (add-hook 'before-save-hook 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/config.sub b/config.sub new file mode 100755 index 0000000..defe52c --- /dev/null +++ b/config.sub @@ -0,0 +1,1960 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright 1992-2023 Free Software Foundation, Inc. + +# shellcheck disable=SC2006,SC2268 # see below for rationale + +timestamp='2023-09-19' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, see . +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that +# program. This Exception is an additional permission under section 7 +# of the GNU General Public License, version 3 ("GPLv3"). + + +# Please send patches to . +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# You can get the latest version of this script from: +# https://git.savannah.gnu.org/cgit/config.git/plain/config.sub + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +# The "shellcheck disable" line above the timestamp inhibits complaints +# about features and limitations of the classic Bourne shell that were +# superseded or lifted in POSIX. However, this script identifies a wide +# variety of pre-POSIX systems that do not have POSIX shells at all, and +# even some reasonably current systems (Solaris 10 as case-in-point) still +# have a pre-POSIX /bin/sh. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS + +Canonicalize a configuration name. + +Options: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright 1992-2023 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try '$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo "$1" + exit ;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Split fields of configuration type +# shellcheck disable=SC2162 +saved_IFS=$IFS +IFS="-" read field1 field2 field3 field4 <&2 + exit 1 + ;; + *-*-*-*) + basic_machine=$field1-$field2 + basic_os=$field3-$field4 + ;; + *-*-*) + # Ambiguous whether COMPANY is present, or skipped and KERNEL-OS is two + # parts + maybe_os=$field2-$field3 + case $maybe_os in + nto-qnx* | linux-* | uclinux-uclibc* \ + | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* \ + | netbsd*-eabi* | kopensolaris*-gnu* | cloudabi*-eabi* \ + | storm-chaos* | os2-emx* | rtmk-nova* | managarm-* \ + | windows-* ) + basic_machine=$field1 + basic_os=$maybe_os + ;; + android-linux) + basic_machine=$field1-unknown + basic_os=linux-android + ;; + *) + basic_machine=$field1-$field2 + basic_os=$field3 + ;; + esac + ;; + *-*) + # A lone config we happen to match not fitting any pattern + case $field1-$field2 in + decstation-3100) + basic_machine=mips-dec + basic_os= + ;; + *-*) + # Second component is usually, but not always the OS + case $field2 in + # Prevent following clause from handling this valid os + sun*os*) + basic_machine=$field1 + basic_os=$field2 + ;; + zephyr*) + basic_machine=$field1-unknown + basic_os=$field2 + ;; + # Manufacturers + dec* | mips* | sequent* | encore* | pc533* | sgi* | sony* \ + | att* | 7300* | 3300* | delta* | motorola* | sun[234]* \ + | unicom* | ibm* | next | hp | isi* | apollo | altos* \ + | convergent* | ncr* | news | 32* | 3600* | 3100* \ + | hitachi* | c[123]* | convex* | sun | crds | omron* | dg \ + | ultra | tti* | harris | dolphin | highlevel | gould \ + | cbm | ns | masscomp | apple | axis | knuth | cray \ + | microblaze* | sim | cisco \ + | oki | wec | wrs | winbond) + basic_machine=$field1-$field2 + basic_os= + ;; + *) + basic_machine=$field1 + basic_os=$field2 + ;; + esac + ;; + esac + ;; + *) + # Convert single-component short-hands not valid as part of + # multi-component configurations. + case $field1 in + 386bsd) + basic_machine=i386-pc + basic_os=bsd + ;; + a29khif) + basic_machine=a29k-amd + basic_os=udi + ;; + adobe68k) + basic_machine=m68010-adobe + basic_os=scout + ;; + alliant) + basic_machine=fx80-alliant + basic_os= + ;; + altos | altos3068) + basic_machine=m68k-altos + basic_os= + ;; + am29k) + basic_machine=a29k-none + basic_os=bsd + ;; + amdahl) + basic_machine=580-amdahl + basic_os=sysv + ;; + amiga) + basic_machine=m68k-unknown + basic_os= + ;; + amigaos | amigados) + basic_machine=m68k-unknown + basic_os=amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + basic_os=sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + basic_os=sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + basic_os=bsd + ;; + aros) + basic_machine=i386-pc + basic_os=aros + ;; + aux) + basic_machine=m68k-apple + basic_os=aux + ;; + balance) + basic_machine=ns32k-sequent + basic_os=dynix + ;; + blackfin) + basic_machine=bfin-unknown + basic_os=linux + ;; + cegcc) + basic_machine=arm-unknown + basic_os=cegcc + ;; + convex-c1) + basic_machine=c1-convex + basic_os=bsd + ;; + convex-c2) + basic_machine=c2-convex + basic_os=bsd + ;; + convex-c32) + basic_machine=c32-convex + basic_os=bsd + ;; + convex-c34) + basic_machine=c34-convex + basic_os=bsd + ;; + convex-c38) + basic_machine=c38-convex + basic_os=bsd + ;; + cray) + basic_machine=j90-cray + basic_os=unicos + ;; + crds | unos) + basic_machine=m68k-crds + basic_os= + ;; + da30) + basic_machine=m68k-da30 + basic_os= + ;; + decstation | pmax | pmin | dec3100 | decstatn) + basic_machine=mips-dec + basic_os= + ;; + delta88) + basic_machine=m88k-motorola + basic_os=sysv3 + ;; + dicos) + basic_machine=i686-pc + basic_os=dicos + ;; + djgpp) + basic_machine=i586-pc + basic_os=msdosdjgpp + ;; + ebmon29k) + basic_machine=a29k-amd + basic_os=ebmon + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + basic_os=ose + ;; + gmicro) + basic_machine=tron-gmicro + basic_os=sysv + ;; + go32) + basic_machine=i386-pc + basic_os=go32 + ;; + h8300hms) + basic_machine=h8300-hitachi + basic_os=hms + ;; + h8300xray) + basic_machine=h8300-hitachi + basic_os=xray + ;; + h8500hms) + basic_machine=h8500-hitachi + basic_os=hms + ;; + harris) + basic_machine=m88k-harris + basic_os=sysv3 + ;; + hp300 | hp300hpux) + basic_machine=m68k-hp + basic_os=hpux + ;; + hp300bsd) + basic_machine=m68k-hp + basic_os=bsd + ;; + hppaosf) + basic_machine=hppa1.1-hp + basic_os=osf + ;; + hppro) + basic_machine=hppa1.1-hp + basic_os=proelf + ;; + i386mach) + basic_machine=i386-mach + basic_os=mach + ;; + isi68 | isi) + basic_machine=m68k-isi + basic_os=sysv + ;; + m68knommu) + basic_machine=m68k-unknown + basic_os=linux + ;; + magnum | m3230) + basic_machine=mips-mips + basic_os=sysv + ;; + merlin) + basic_machine=ns32k-utek + basic_os=sysv + ;; + mingw64) + basic_machine=x86_64-pc + basic_os=mingw64 + ;; + mingw32) + basic_machine=i686-pc + basic_os=mingw32 + ;; + mingw32ce) + basic_machine=arm-unknown + basic_os=mingw32ce + ;; + monitor) + basic_machine=m68k-rom68k + basic_os=coff + ;; + morphos) + basic_machine=powerpc-unknown + basic_os=morphos + ;; + moxiebox) + basic_machine=moxie-unknown + basic_os=moxiebox + ;; + msdos) + basic_machine=i386-pc + basic_os=msdos + ;; + msys) + basic_machine=i686-pc + basic_os=msys + ;; + mvs) + basic_machine=i370-ibm + basic_os=mvs + ;; + nacl) + basic_machine=le32-unknown + basic_os=nacl + ;; + ncr3000) + basic_machine=i486-ncr + basic_os=sysv4 + ;; + netbsd386) + basic_machine=i386-pc + basic_os=netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + basic_os=linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + basic_os=newsos + ;; + news1000) + basic_machine=m68030-sony + basic_os=newsos + ;; + necv70) + basic_machine=v70-nec + basic_os=sysv + ;; + nh3000) + basic_machine=m68k-harris + basic_os=cxux + ;; + nh[45]000) + basic_machine=m88k-harris + basic_os=cxux + ;; + nindy960) + basic_machine=i960-intel + basic_os=nindy + ;; + mon960) + basic_machine=i960-intel + basic_os=mon960 + ;; + nonstopux) + basic_machine=mips-compaq + basic_os=nonstopux + ;; + os400) + basic_machine=powerpc-ibm + basic_os=os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + basic_os=ose + ;; + os68k) + basic_machine=m68k-none + basic_os=os68k + ;; + paragon) + basic_machine=i860-intel + basic_os=osf + ;; + parisc) + basic_machine=hppa-unknown + basic_os=linux + ;; + psp) + basic_machine=mipsallegrexel-sony + basic_os=psp + ;; + pw32) + basic_machine=i586-unknown + basic_os=pw32 + ;; + rdos | rdos64) + basic_machine=x86_64-pc + basic_os=rdos + ;; + rdos32) + basic_machine=i386-pc + basic_os=rdos + ;; + rom68k) + basic_machine=m68k-rom68k + basic_os=coff + ;; + sa29200) + basic_machine=a29k-amd + basic_os=udi + ;; + sei) + basic_machine=mips-sei + basic_os=seiux + ;; + sequent) + basic_machine=i386-sequent + basic_os= + ;; + sps7) + basic_machine=m68k-bull + basic_os=sysv2 + ;; + st2000) + basic_machine=m68k-tandem + basic_os= + ;; + stratus) + basic_machine=i860-stratus + basic_os=sysv4 + ;; + sun2) + basic_machine=m68000-sun + basic_os= + ;; + sun2os3) + basic_machine=m68000-sun + basic_os=sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + basic_os=sunos4 + ;; + sun3) + basic_machine=m68k-sun + basic_os= + ;; + sun3os3) + basic_machine=m68k-sun + basic_os=sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + basic_os=sunos4 + ;; + sun4) + basic_machine=sparc-sun + basic_os= + ;; + sun4os3) + basic_machine=sparc-sun + basic_os=sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + basic_os=sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + basic_os=solaris2 + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + basic_os= + ;; + sv1) + basic_machine=sv1-cray + basic_os=unicos + ;; + symmetry) + basic_machine=i386-sequent + basic_os=dynix + ;; + t3e) + basic_machine=alphaev5-cray + basic_os=unicos + ;; + t90) + basic_machine=t90-cray + basic_os=unicos + ;; + toad1) + basic_machine=pdp10-xkl + basic_os=tops20 + ;; + tpf) + basic_machine=s390x-ibm + basic_os=tpf + ;; + udi29k) + basic_machine=a29k-amd + basic_os=udi + ;; + ultra3) + basic_machine=a29k-nyu + basic_os=sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + basic_os=none + ;; + vaxv) + basic_machine=vax-dec + basic_os=sysv + ;; + vms) + basic_machine=vax-dec + basic_os=vms + ;; + vsta) + basic_machine=i386-pc + basic_os=vsta + ;; + vxworks960) + basic_machine=i960-wrs + basic_os=vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + basic_os=vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + basic_os=vxworks + ;; + xbox) + basic_machine=i686-pc + basic_os=mingw32 + ;; + ymp) + basic_machine=ymp-cray + basic_os=unicos + ;; + *) + basic_machine=$1 + basic_os= + ;; + esac + ;; +esac + +# Decode 1-component or ad-hoc basic machines +case $basic_machine in + # Here we handle the default manufacturer of certain CPU types. It is in + # some cases the only manufacturer, in others, it is the most popular. + w89k) + cpu=hppa1.1 + vendor=winbond + ;; + op50n) + cpu=hppa1.1 + vendor=oki + ;; + op60c) + cpu=hppa1.1 + vendor=oki + ;; + ibm*) + cpu=i370 + vendor=ibm + ;; + orion105) + cpu=clipper + vendor=highlevel + ;; + mac | mpw | mac-mpw) + cpu=m68k + vendor=apple + ;; + pmac | pmac-mpw) + cpu=powerpc + vendor=apple + ;; + + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + cpu=m68000 + vendor=att + ;; + 3b*) + cpu=we32k + vendor=att + ;; + bluegene*) + cpu=powerpc + vendor=ibm + basic_os=cnk + ;; + decsystem10* | dec10*) + cpu=pdp10 + vendor=dec + basic_os=tops10 + ;; + decsystem20* | dec20*) + cpu=pdp10 + vendor=dec + basic_os=tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + cpu=m68k + vendor=motorola + ;; + dpx2*) + cpu=m68k + vendor=bull + basic_os=sysv3 + ;; + encore | umax | mmax) + cpu=ns32k + vendor=encore + ;; + elxsi) + cpu=elxsi + vendor=elxsi + basic_os=${basic_os:-bsd} + ;; + fx2800) + cpu=i860 + vendor=alliant + ;; + genix) + cpu=ns32k + vendor=ns + ;; + h3050r* | hiux*) + cpu=hppa1.1 + vendor=hitachi + basic_os=hiuxwe2 + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + cpu=hppa1.0 + vendor=hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + cpu=m68000 + vendor=hp + ;; + hp9k3[2-9][0-9]) + cpu=m68k + vendor=hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + cpu=hppa1.0 + vendor=hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + cpu=hppa1.1 + vendor=hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + cpu=hppa1.1 + vendor=hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + cpu=hppa1.1 + vendor=hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + cpu=hppa1.1 + vendor=hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + cpu=hppa1.0 + vendor=hp + ;; + i*86v32) + cpu=`echo "$1" | sed -e 's/86.*/86/'` + vendor=pc + basic_os=sysv32 + ;; + i*86v4*) + cpu=`echo "$1" | sed -e 's/86.*/86/'` + vendor=pc + basic_os=sysv4 + ;; + i*86v) + cpu=`echo "$1" | sed -e 's/86.*/86/'` + vendor=pc + basic_os=sysv + ;; + i*86sol2) + cpu=`echo "$1" | sed -e 's/86.*/86/'` + vendor=pc + basic_os=solaris2 + ;; + j90 | j90-cray) + cpu=j90 + vendor=cray + basic_os=${basic_os:-unicos} + ;; + iris | iris4d) + cpu=mips + vendor=sgi + case $basic_os in + irix*) + ;; + *) + basic_os=irix4 + ;; + esac + ;; + miniframe) + cpu=m68000 + vendor=convergent + ;; + *mint | mint[0-9]* | *MiNT | *MiNT[0-9]*) + cpu=m68k + vendor=atari + basic_os=mint + ;; + news-3600 | risc-news) + cpu=mips + vendor=sony + basic_os=newsos + ;; + next | m*-next) + cpu=m68k + vendor=next + case $basic_os in + openstep*) + ;; + nextstep*) + ;; + ns2*) + basic_os=nextstep2 + ;; + *) + basic_os=nextstep3 + ;; + esac + ;; + np1) + cpu=np1 + vendor=gould + ;; + op50n-* | op60c-*) + cpu=hppa1.1 + vendor=oki + basic_os=proelf + ;; + pa-hitachi) + cpu=hppa1.1 + vendor=hitachi + basic_os=hiuxwe2 + ;; + pbd) + cpu=sparc + vendor=tti + ;; + pbb) + cpu=m68k + vendor=tti + ;; + pc532) + cpu=ns32k + vendor=pc532 + ;; + pn) + cpu=pn + vendor=gould + ;; + power) + cpu=power + vendor=ibm + ;; + ps2) + cpu=i386 + vendor=ibm + ;; + rm[46]00) + cpu=mips + vendor=siemens + ;; + rtpc | rtpc-*) + cpu=romp + vendor=ibm + ;; + sde) + cpu=mipsisa32 + vendor=sde + basic_os=${basic_os:-elf} + ;; + simso-wrs) + cpu=sparclite + vendor=wrs + basic_os=vxworks + ;; + tower | tower-32) + cpu=m68k + vendor=ncr + ;; + vpp*|vx|vx-*) + cpu=f301 + vendor=fujitsu + ;; + w65) + cpu=w65 + vendor=wdc + ;; + w89k-*) + cpu=hppa1.1 + vendor=winbond + basic_os=proelf + ;; + none) + cpu=none + vendor=none + ;; + leon|leon[3-9]) + cpu=sparc + vendor=$basic_machine + ;; + leon-*|leon[3-9]-*) + cpu=sparc + vendor=`echo "$basic_machine" | sed 's/-.*//'` + ;; + + *-*) + # shellcheck disable=SC2162 + saved_IFS=$IFS + IFS="-" read cpu vendor <&2 + exit 1 + ;; + esac + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $vendor in + digital*) + vendor=dec + ;; + commodore*) + vendor=cbm + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if test x"$basic_os" != x +then + +# First recognize some ad-hoc cases, or perhaps split kernel-os, or else just +# set os. +obj= +case $basic_os in + gnu/linux*) + kernel=linux + os=`echo "$basic_os" | sed -e 's|gnu/linux|gnu|'` + ;; + os2-emx) + kernel=os2 + os=`echo "$basic_os" | sed -e 's|os2-emx|emx|'` + ;; + nto-qnx*) + kernel=nto + os=`echo "$basic_os" | sed -e 's|nto-qnx|qnx|'` + ;; + *-*) + # shellcheck disable=SC2162 + saved_IFS=$IFS + IFS="-" read kernel os <&2 + fi + ;; + *) + echo "Invalid configuration '$1': OS '$os' not recognized" 1>&2 + exit 1 + ;; +esac + +case $obj in + aout* | coff* | elf* | pe*) + ;; + '') + # empty is fine + ;; + *) + echo "Invalid configuration '$1': Machine code format '$obj' not recognized" 1>&2 + exit 1 + ;; +esac + +# Here we handle the constraint that a (synthetic) cpu and os are +# valid only in combination with each other and nowhere else. +case $cpu-$os in + # The "javascript-unknown-ghcjs" triple is used by GHC; we + # accept it here in order to tolerate that, but reject any + # variations. + javascript-ghcjs) + ;; + javascript-* | *-ghcjs) + echo "Invalid configuration '$1': cpu '$cpu' is not valid with os '$os$obj'" 1>&2 + exit 1 + ;; +esac + +# As a final step for OS-related things, validate the OS-kernel combination +# (given a valid OS), if there is a kernel. +case $kernel-$os-$obj in + linux-gnu*- | linux-dietlibc*- | linux-android*- | linux-newlib*- \ + | linux-musl*- | linux-relibc*- | linux-uclibc*- | linux-mlibc*- ) + ;; + uclinux-uclibc*- ) + ;; + managarm-mlibc*- | managarm-kernel*- ) + ;; + windows*-msvc*-) + ;; + -dietlibc*- | -newlib*- | -musl*- | -relibc*- | -uclibc*- | -mlibc*- ) + # These are just libc implementations, not actual OSes, and thus + # require a kernel. + echo "Invalid configuration '$1': libc '$os' needs explicit kernel." 1>&2 + exit 1 + ;; + -kernel*- ) + echo "Invalid configuration '$1': '$os' needs explicit kernel." 1>&2 + exit 1 + ;; + *-kernel*- ) + echo "Invalid configuration '$1': '$kernel' does not support '$os'." 1>&2 + exit 1 + ;; + *-msvc*- ) + echo "Invalid configuration '$1': '$os' needs 'windows'." 1>&2 + exit 1 + ;; + kfreebsd*-gnu*- | kopensolaris*-gnu*-) + ;; + vxworks-simlinux- | vxworks-simwindows- | vxworks-spe-) + ;; + nto-qnx*-) + ;; + os2-emx-) + ;; + *-eabi*- | *-gnueabi*-) + ;; + none--*) + # None (no kernel, i.e. freestanding / bare metal), + # can be paired with an machine code file format + ;; + -*-) + # Blank kernel with real OS is always fine. + ;; + --*) + # Blank kernel and OS with real machine code file format is always fine. + ;; + *-*-*) + echo "Invalid configuration '$1': Kernel '$kernel' not known to work with OS '$os'." 1>&2 + exit 1 + ;; +esac + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +case $vendor in + unknown) + case $cpu-$os in + *-riscix*) + vendor=acorn + ;; + *-sunos*) + vendor=sun + ;; + *-cnk* | *-aix*) + vendor=ibm + ;; + *-beos*) + vendor=be + ;; + *-hpux*) + vendor=hp + ;; + *-mpeix*) + vendor=hp + ;; + *-hiux*) + vendor=hitachi + ;; + *-unos*) + vendor=crds + ;; + *-dgux*) + vendor=dg + ;; + *-luna*) + vendor=omron + ;; + *-genix*) + vendor=ns + ;; + *-clix*) + vendor=intergraph + ;; + *-mvs* | *-opened*) + vendor=ibm + ;; + *-os400*) + vendor=ibm + ;; + s390-* | s390x-*) + vendor=ibm + ;; + *-ptx*) + vendor=sequent + ;; + *-tpf*) + vendor=ibm + ;; + *-vxsim* | *-vxworks* | *-windiss*) + vendor=wrs + ;; + *-aux*) + vendor=apple + ;; + *-hms*) + vendor=hitachi + ;; + *-mpw* | *-macos*) + vendor=apple + ;; + *-*mint | *-mint[0-9]* | *-*MiNT | *-MiNT[0-9]*) + vendor=atari + ;; + *-vos*) + vendor=stratus + ;; + esac + ;; +esac + +echo "$cpu-$vendor${kernel:+-$kernel}${os:+-$os}${obj:+-$obj}" +exit + +# Local variables: +# eval: (add-hook 'before-save-hook 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/configure b/configure new file mode 100755 index 0000000..e25bf6b --- /dev/null +++ b/configure @@ -0,0 +1,3262 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.72 for pkgconfig-sys-stubs 1.0. +# +# Report bugs to . +# +# +# Copyright (C) 1992-1996, 1998-2017, 2020-2023 Free Software Foundation, +# Inc. +# +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test ${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1 +then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else case e in #( + e) case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac ;; +esac +fi + + + +# Reset variables that may have inherited troublesome values from +# the environment. + +# IFS needs to be set, to space, tab, and newline, in precisely that order. +# (If _AS_PATH_WALK were called with IFS unset, it would have the +# side effect of setting IFS to empty, thus disabling word splitting.) +# Quoting is to prevent editors from complaining about space-tab. +as_nl=' +' +export as_nl +IFS=" "" $as_nl" + +PS1='$ ' +PS2='> ' +PS4='+ ' + +# Ensure predictable behavior from utilities with locale-dependent output. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# We cannot yet rely on "unset" to work, but we need these variables +# to be unset--not just set to an empty or harmless value--now, to +# avoid bugs in old shells (e.g. pre-3.0 UWIN ksh). This construct +# also avoids known problems related to "unset" and subshell syntax +# in other old shells (e.g. bash 2.01 and pdksh 5.2.14). +for as_var in BASH_ENV ENV MAIL MAILPATH CDPATH +do eval test \${$as_var+y} \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done + +# Ensure that fds 0, 1, and 2 are open. +if (exec 3>&0) 2>/dev/null; then :; else exec 0&1) 2>/dev/null; then :; else exec 1>/dev/null; fi +if (exec 3>&2) ; then :; else exec 2>/dev/null; fi + +# The user is always right. +if ${PATH_SEPARATOR+false} :; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + test -r "$as_dir$0" && as_myself=$as_dir$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as 'sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + printf "%s\n" "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + + +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed 'exec'. +printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test \${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1 +then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else case e in #( + e) case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ) +then : + +else case e in #( + e) exitcode=1; echo positional parameters were not saved. ;; +esac +fi +test x\$exitcode = x0 || exit 1 +blah=\$(echo \$(echo blah)) +test x\"\$blah\" = xblah || exit 1 +test -x / || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 +test \$(( 1 + 1 )) = 2 || exit 1" + if (eval "$as_required") 2>/dev/null +then : + as_have_required=yes +else case e in #( + e) as_have_required=no ;; +esac +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null +then : + +else case e in #( + e) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + as_found=: + case $as_dir in #( + /*) + for as_base in sh bash ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + as_run=a "$as_shell" -c "$as_bourne_compatible""$as_required" 2>/dev/null +then : + CONFIG_SHELL=$as_shell as_have_required=yes + if as_run=a "$as_shell" -c "$as_bourne_compatible""$as_suggested" 2>/dev/null +then : + break 2 +fi +fi + done;; + esac + as_found=false +done +IFS=$as_save_IFS +if $as_found +then : + +else case e in #( + e) if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + as_run=a "$SHELL" -c "$as_bourne_compatible""$as_required" 2>/dev/null +then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi ;; +esac +fi + + + if test "x$CONFIG_SHELL" != x +then : + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed 'exec'. +printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 +fi + + if test x$as_have_required = xno +then : + printf "%s\n" "$0: This script requires a shell more modern than all" + printf "%s\n" "$0: the shells that I found on your system." + if test ${ZSH_VERSION+y} ; then + printf "%s\n" "$0: In particular, zsh $ZSH_VERSION has bugs and should" + printf "%s\n" "$0: be upgraded to zsh 4.3.4 or later." + else + printf "%s\n" "$0: Please tell bug-autoconf@gnu.org and +$0: Simon.Urbanek@r-project.org about your system, +$0: including any error possibly output before this +$0: message. Then install a modern shell, or manually run +$0: the script under such a shell if you do have one." + fi + exit 1 +fi ;; +esac +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`printf "%s\n" "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +printf "%s\n" X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null +then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else case e in #( + e) as_fn_append () + { + eval $1=\$$1\$2 + } ;; +esac +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null +then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else case e in #( + e) as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } ;; +esac +fi # as_fn_arith + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + printf "%s\n" "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +printf "%s\n" X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + + + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + t clear + :clear + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { printf "%s\n" "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + + +# Determine whether it's possible to make 'echo' print without a newline. +# These variables are no longer used directly by Autoconf, but are AC_SUBSTed +# for compatibility with existing Makefiles. +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +# For backward compatibility with old third-party macros, we provide +# the shell variables $as_echo and $as_echo_n. New code should use +# AS_ECHO(["message"]) and AS_ECHO_N(["message"]), respectively. +as_echo='printf %s\n' +as_echo_n='printf %s' + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both 'ln -s file dir' and 'ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; 'ln -s' creates a wrapper executable. + # In both cases, we have to default to 'cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_sed_cpp="y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" +as_tr_cpp="eval sed '$as_sed_cpp'" # deprecated + +# Sed expression to map a string onto a valid variable name. +as_sed_sh="y%*+%pp%;s%[^_$as_cr_alnum]%_%g" +as_tr_sh="eval sed '$as_sed_sh'" # deprecated + + +test -n "$DJDIR" || exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= + +# Identity of this package. +PACKAGE_NAME='pkgconfig-sys-stubs' +PACKAGE_TARNAME='pkgconfig-sys-stubs' +PACKAGE_VERSION='1.0' +PACKAGE_STRING='pkgconfig-sys-stubs 1.0' +PACKAGE_BUGREPORT='Simon.Urbanek@r-project.org' +PACKAGE_URL='' + +ac_unique_file="darwin/zlib.pc" +ac_subst_vars='LTLIBOBJS +LIBOBJS +STUBS +ac_prefix_program +SED +host_os +host_vendor +host_cpu +host +build_os +build_vendor +build_cpu +build +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +runstatedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +' + ac_precious_vars='build_alias +host_alias +target_alias' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +runstatedir='${localstatedir}/run' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: '$ac_useropt'" + ac_useropt_orig=$ac_useropt + ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: '$ac_useropt'" + ac_useropt_orig=$ac_useropt + ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -runstatedir | --runstatedir | --runstatedi | --runstated \ + | --runstate | --runstat | --runsta | --runst | --runs \ + | --run | --ru | --r) + ac_prev=runstatedir ;; + -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \ + | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \ + | --run=* | --ru=* | --r=*) + runstatedir=$ac_optarg ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: '$ac_useropt'" + ac_useropt_orig=$ac_useropt + ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: '$ac_useropt'" + ac_useropt_orig=$ac_useropt + ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) as_fn_error $? "unrecognized option: '$ac_option' +Try '$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: '$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + printf "%s\n" "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + printf "%s\n" "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + as_fn_error $? "missing argument to $ac_option" +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) printf "%s\n" "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir runstatedir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" +done + +# There might be people who depend on the old broken behavior: '$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +printf "%s\n" X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but 'cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +'configure' configures pkgconfig-sys-stubs 1.0 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print 'checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for '--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or '..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, 'make install' will install all the files in +'$ac_default_prefix/bin', '$ac_default_prefix/lib' etc. You can specify +an installation prefix other than '$ac_default_prefix' using '--prefix', +for instance '--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --runstatedir=DIR modifiable per-process data [LOCALSTATEDIR/run] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root + [DATAROOTDIR/doc/pkgconfig-sys-stubs] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of pkgconfig-sys-stubs 1.0:";; + esac + cat <<\_ACEOF + +Report bugs to . +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`printf "%s\n" "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`printf "%s\n" "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for configure.gnu first; this name is used for a wrapper for + # Metaconfig's "Configure" on case-insensitive file systems. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + printf "%s\n" "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +pkgconfig-sys-stubs configure 1.0 +generated by GNU Autoconf 2.72 + +Copyright (C) 2023 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## +ac_configure_args_raw= +for ac_arg +do + case $ac_arg in + *\'*) + ac_arg=`printf "%s\n" "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + as_fn_append ac_configure_args_raw " '$ac_arg'" +done + +case $ac_configure_args_raw in + *$as_nl*) + ac_safe_unquote= ;; + *) + ac_unsafe_z='|&;<>()$`\\"*?[ '' ' # This string ends in space, tab. + ac_unsafe_a="$ac_unsafe_z#~" + ac_safe_unquote="s/ '\\([^$ac_unsafe_a][^$ac_unsafe_z]*\\)'/ \\1/g" + ac_configure_args_raw=` printf "%s\n" "$ac_configure_args_raw" | sed "$ac_safe_unquote"`;; +esac + +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by pkgconfig-sys-stubs $as_me 1.0, which was +generated by GNU Autoconf 2.72. Invocation command line was + + $ $0$ac_configure_args_raw + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + printf "%s\n" "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`printf "%s\n" "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Sanitize IFS. + IFS=" "" $as_nl" + # Save into config.log some information that might help in debugging. + { + echo + + printf "%s\n" "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +printf "%s\n" "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + printf "%s\n" "## ----------------- ## +## Output variables. ## +## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`printf "%s\n" "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + printf "%s\n" "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + printf "%s\n" "## ------------------- ## +## File substitutions. ## +## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`printf "%s\n" "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + printf "%s\n" "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + printf "%s\n" "## ----------- ## +## confdefs.h. ## +## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + printf "%s\n" "$as_me: caught signal $ac_signal" + printf "%s\n" "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +printf "%s\n" "/* confdefs.h */" > confdefs.h + +# Predefined preprocessor variables. + +printf "%s\n" "#define PACKAGE_NAME \"$PACKAGE_NAME\"" >>confdefs.h + +printf "%s\n" "#define PACKAGE_TARNAME \"$PACKAGE_TARNAME\"" >>confdefs.h + +printf "%s\n" "#define PACKAGE_VERSION \"$PACKAGE_VERSION\"" >>confdefs.h + +printf "%s\n" "#define PACKAGE_STRING \"$PACKAGE_STRING\"" >>confdefs.h + +printf "%s\n" "#define PACKAGE_BUGREPORT \"$PACKAGE_BUGREPORT\"" >>confdefs.h + +printf "%s\n" "#define PACKAGE_URL \"$PACKAGE_URL\"" >>confdefs.h + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +if test -n "$CONFIG_SITE"; then + ac_site_files="$CONFIG_SITE" +elif test "x$prefix" != xNONE; then + ac_site_files="$prefix/share/config.site $prefix/etc/config.site" +else + ac_site_files="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +fi + +for ac_site_file in $ac_site_files +do + case $ac_site_file in #( + */*) : + ;; #( + *) : + ac_site_file=./$ac_site_file ;; +esac + if test -f "$ac_site_file" && test -r "$ac_site_file"; then + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +printf "%s\n" "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" \ + || { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 +printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See 'config.log' for more details" "$LINENO" 5; } + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +printf "%s\n" "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +printf "%s\n" "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + + +# Auxiliary files required by this configure script. +ac_aux_files="config.guess config.sub" + +# Locations in which to look for auxiliary files. +ac_aux_dir_candidates="${srcdir}${PATH_SEPARATOR}${srcdir}/..${PATH_SEPARATOR}${srcdir}/../.." + +# Search for a directory containing all of the required auxiliary files, +# $ac_aux_files, from the $PATH-style list $ac_aux_dir_candidates. +# If we don't find one directory that contains all the files we need, +# we report the set of missing files from the *first* directory in +# $ac_aux_dir_candidates and give up. +ac_missing_aux_files="" +ac_first_candidate=: +printf "%s\n" "$as_me:${as_lineno-$LINENO}: looking for aux files: $ac_aux_files" >&5 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in $ac_aux_dir_candidates +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + as_found=: + + printf "%s\n" "$as_me:${as_lineno-$LINENO}: trying $as_dir" >&5 + ac_aux_dir_found=yes + ac_install_sh= + for ac_aux in $ac_aux_files + do + # As a special case, if "install-sh" is required, that requirement + # can be satisfied by any of "install-sh", "install.sh", or "shtool", + # and $ac_install_sh is set appropriately for whichever one is found. + if test x"$ac_aux" = x"install-sh" + then + if test -f "${as_dir}install-sh"; then + printf "%s\n" "$as_me:${as_lineno-$LINENO}: ${as_dir}install-sh found" >&5 + ac_install_sh="${as_dir}install-sh -c" + elif test -f "${as_dir}install.sh"; then + printf "%s\n" "$as_me:${as_lineno-$LINENO}: ${as_dir}install.sh found" >&5 + ac_install_sh="${as_dir}install.sh -c" + elif test -f "${as_dir}shtool"; then + printf "%s\n" "$as_me:${as_lineno-$LINENO}: ${as_dir}shtool found" >&5 + ac_install_sh="${as_dir}shtool install -c" + else + ac_aux_dir_found=no + if $ac_first_candidate; then + ac_missing_aux_files="${ac_missing_aux_files} install-sh" + else + break + fi + fi + else + if test -f "${as_dir}${ac_aux}"; then + printf "%s\n" "$as_me:${as_lineno-$LINENO}: ${as_dir}${ac_aux} found" >&5 + else + ac_aux_dir_found=no + if $ac_first_candidate; then + ac_missing_aux_files="${ac_missing_aux_files} ${ac_aux}" + else + break + fi + fi + fi + done + if test "$ac_aux_dir_found" = yes; then + ac_aux_dir="$as_dir" + break + fi + ac_first_candidate=false + + as_found=false +done +IFS=$as_save_IFS +if $as_found +then : + +else case e in #( + e) as_fn_error $? "cannot find required auxiliary files:$ac_missing_aux_files" "$LINENO" 5 ;; +esac +fi + + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +if test -f "${ac_aux_dir}config.guess"; then + ac_config_guess="$SHELL ${ac_aux_dir}config.guess" +fi +if test -f "${ac_aux_dir}config.sub"; then + ac_config_sub="$SHELL ${ac_aux_dir}config.sub" +fi +if test -f "$ac_aux_dir/configure"; then + ac_configure="$SHELL ${ac_aux_dir}configure" +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: '$ac_var' was set to '$ac_old_val' in the previous run" >&5 +printf "%s\n" "$as_me: error: '$ac_var' was set to '$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: '$ac_var' was not set in the previous run" >&5 +printf "%s\n" "$as_me: error: '$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: '$ac_var' has changed since the previous run:" >&5 +printf "%s\n" "$as_me: error: '$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in '$ac_var' since the previous run:" >&5 +printf "%s\n" "$as_me: warning: ignoring whitespace changes in '$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: former value: '$ac_old_val'" >&5 +printf "%s\n" "$as_me: former value: '$ac_old_val'" >&2;} + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: current value: '$ac_new_val'" >&5 +printf "%s\n" "$as_me: current value: '$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`printf "%s\n" "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 +printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +printf "%s\n" "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run '${MAKE-make} distclean' and/or 'rm $cache_file' + and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + + + + + # Make sure we can run config.sub. +$SHELL "${ac_aux_dir}config.sub" sun4 >/dev/null 2>&1 || + as_fn_error $? "cannot run $SHELL ${ac_aux_dir}config.sub" "$LINENO" 5 + +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 +printf %s "checking build system type... " >&6; } +if test ${ac_cv_build+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "${ac_aux_dir}config.guess"` +test "x$ac_build_alias" = x && + as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 +ac_cv_build=`$SHELL "${ac_aux_dir}config.sub" $ac_build_alias` || + as_fn_error $? "$SHELL ${ac_aux_dir}config.sub $ac_build_alias failed" "$LINENO" 5 + ;; +esac +fi +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 +printf "%s\n" "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 +printf %s "checking host system type... " >&6; } +if test ${ac_cv_host+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "${ac_aux_dir}config.sub" $host_alias` || + as_fn_error $? "$SHELL ${ac_aux_dir}config.sub $host_alias failed" "$LINENO" 5 +fi + ;; +esac +fi +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 +printf "%s\n" "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + + +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 +printf %s "checking for a sed that does not truncate output... " >&6; } +if test ${ac_cv_path_SED+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for ac_i in 1 2 3 4 5 6 7; do + ac_script="$ac_script$as_nl$ac_script" + done + echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed + { ac_script=; unset ac_script;} + if test -z "$SED"; then + ac_path_SED_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_prog in sed gsed + do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_SED="$as_dir$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_SED" || continue +# Check for GNU ac_path_SED and select it if it is found. + # Check for GNU $ac_path_SED +case `"$ac_path_SED" --version 2>&1` in #( +*GNU*) + ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; +#( +*) + ac_count=0 + printf %s 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + printf "%s\n" '' >> "conftest.nl" + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_SED_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_SED="$ac_path_SED" + ac_path_SED_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_SED_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_SED"; then + as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 + fi +else + ac_cv_path_SED=$SED +fi + ;; +esac +fi +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 +printf "%s\n" "$ac_cv_path_SED" >&6; } + SED="$ac_cv_path_SED" + rm -f conftest.sed + + +if test "x$prefix" = xNONE; then + printf %s "checking for prefix by " >&6 + # Extract the first word of "pkg-config", so it can be a program name with args. +set dummy pkg-config; ac_word=$2 +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_path_ac_prefix_program+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) case $ac_prefix_program in + [\\/]* | ?:[\\/]*) + ac_cv_path_ac_prefix_program="$ac_prefix_program" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_path_ac_prefix_program="$as_dir$ac_word$ac_exec_ext" + printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac ;; +esac +fi +ac_prefix_program=$ac_cv_path_ac_prefix_program +if test -n "$ac_prefix_program"; then + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_prefix_program" >&5 +printf "%s\n" "$ac_prefix_program" >&6; } +else + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf "%s\n" "no" >&6; } +fi + + + if test -n "$ac_prefix_program"; then + prefix=`$as_dirname -- "$ac_prefix_program" || +$as_expr X"$ac_prefix_program" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_prefix_program" : 'X\(//\)[^/]' \| \ + X"$ac_prefix_program" : 'X\(//\)$' \| \ + X"$ac_prefix_program" : 'X\(/\)' \| . 2>/dev/null || +printf "%s\n" X"$ac_prefix_program" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + prefix=`$as_dirname -- "$prefix" || +$as_expr X"$prefix" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$prefix" : 'X\(//\)[^/]' \| \ + X"$prefix" : 'X\(//\)$' \| \ + X"$prefix" : 'X\(/\)' \| . 2>/dev/null || +printf "%s\n" X"$prefix" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + fi +fi + +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking prefix" >&5 +printf %s "checking prefix... " >&6; } +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $prefix" >&5 +printf "%s\n" "$prefix" >&6; } + +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for stubs matching host" >&5 +printf %s "checking for stubs matching host... " >&6; } + +host_osname=$(echo ${host_os} | $SED -e 's/[0-9.]*$//') +host_osmajor=$(echo ${host_os} | $SED -e 's/[.][0-9.]*$//') + +STUBS='' +test -d ${srcdir}/${host_osname} && STUBS="$STUBS ${srcdir}/${host_osname}" +test -d ${srcdir}/${host_osname}/${host_cpu} && STUBS="$STUBS ${srcdir}/${host_osname}/${host_cpu}" +test -d ${srcdir}/${host_osmajor} && STUBS="$STUBS ${srcdir}/${host_osmajor}" +test -d ${srcdir}/${host_osmajor}/${host_cpu} && STUBS="$STUBS ${srcdir}/${host_osmajor}/{host_cpu}" + +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $STUBS" >&5 +printf "%s\n" "$STUBS" >&6; } + + +ac_config_files="$ac_config_files Makefile" + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# 'ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* 'ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +printf "%s\n" "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # 'set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # 'set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test ${\1+y} || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + if test "x$cache_file" != "x/dev/null"; then + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +printf "%s\n" "$as_me: updating cache $cache_file" >&6;} + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi + else + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +printf "%s\n" "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# Transform confdefs.h into DEFS. +# Protect against shell expansion while executing Makefile rules. +# Protect against Makefile macro expansion. +# +# If the first sed substitution is executed (which looks for macros that +# take arguments), then branch to the quote section. Otherwise, +# look for a macro that doesn't take arguments. +ac_script=' +:mline +/\\$/{ + N + s,\\\n,, + b mline +} +t clear +:clear +s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g +t quote +s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g +t quote +b any +:quote +s/[][ `~#$^&*(){}\\|;'\''"<>?]/\\&/g +s/\$/$$/g +H +:any +${ + g + s/^\n// + s/\n/ /g + p +} +' +DEFS=`sed -n "$ac_script" confdefs.h` + + +ac_libobjs= +ac_ltlibobjs= +U= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`printf "%s\n" "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + + +: "${CONFIG_STATUS=./config.status}" +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +printf "%s\n" "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false + +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test ${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1 +then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else case e in #( + e) case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac ;; +esac +fi + + + +# Reset variables that may have inherited troublesome values from +# the environment. + +# IFS needs to be set, to space, tab, and newline, in precisely that order. +# (If _AS_PATH_WALK were called with IFS unset, it would have the +# side effect of setting IFS to empty, thus disabling word splitting.) +# Quoting is to prevent editors from complaining about space-tab. +as_nl=' +' +export as_nl +IFS=" "" $as_nl" + +PS1='$ ' +PS2='> ' +PS4='+ ' + +# Ensure predictable behavior from utilities with locale-dependent output. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# We cannot yet rely on "unset" to work, but we need these variables +# to be unset--not just set to an empty or harmless value--now, to +# avoid bugs in old shells (e.g. pre-3.0 UWIN ksh). This construct +# also avoids known problems related to "unset" and subshell syntax +# in other old shells (e.g. bash 2.01 and pdksh 5.2.14). +for as_var in BASH_ENV ENV MAIL MAILPATH CDPATH +do eval test \${$as_var+y} \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done + +# Ensure that fds 0, 1, and 2 are open. +if (exec 3>&0) 2>/dev/null; then :; else exec 0&1) 2>/dev/null; then :; else exec 1>/dev/null; fi +if (exec 3>&2) ; then :; else exec 2>/dev/null; fi + +# The user is always right. +if ${PATH_SEPARATOR+false} :; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + test -r "$as_dir$0" && as_myself=$as_dir$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as 'sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + printf "%s\n" "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + printf "%s\n" "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null +then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else case e in #( + e) as_fn_append () + { + eval $1=\$$1\$2 + } ;; +esac +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null +then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else case e in #( + e) as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } ;; +esac +fi # as_fn_arith + + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +printf "%s\n" X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + + +# Determine whether it's possible to make 'echo' print without a newline. +# These variables are no longer used directly by Autoconf, but are AC_SUBSTed +# for compatibility with existing Makefiles. +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +# For backward compatibility with old third-party macros, we provide +# the shell variables $as_echo and $as_echo_n. New code should use +# AS_ECHO(["message"]) and AS_ECHO_N(["message"]), respectively. +as_echo='printf %s\n' +as_echo_n='printf %s' + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both 'ln -s file dir' and 'ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; 'ln -s' creates a wrapper executable. + # In both cases, we have to default to 'cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`printf "%s\n" "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +printf "%s\n" X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_sed_cpp="y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" +as_tr_cpp="eval sed '$as_sed_cpp'" # deprecated + +# Sed expression to map a string onto a valid variable name. +as_sed_sh="y%*+%pp%;s%[^_$as_cr_alnum]%_%g" +as_tr_sh="eval sed '$as_sed_sh'" # deprecated + + +exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by pkgconfig-sys-stubs $as_me 1.0, which was +generated by GNU Autoconf 2.72. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +'$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. + +Usage: $0 [OPTION]... [TAG]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + +Configuration files: +$config_files + +Report bugs to ." + +_ACEOF +ac_cs_config=`printf "%s\n" "$ac_configure_args" | sed "$ac_safe_unquote"` +ac_cs_config_escaped=`printf "%s\n" "$ac_cs_config" | sed "s/^ //; s/'/'\\\\\\\\''/g"` +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config='$ac_cs_config_escaped' +ac_cs_version="\\ +pkgconfig-sys-stubs config.status 1.0 +configured by $0, generated by GNU Autoconf 2.72, + with options \\"\$ac_cs_config\\" + +Copyright (C) 2023 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + printf "%s\n" "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + printf "%s\n" "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`printf "%s\n" "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h | --help | --hel | -h ) + printf "%s\n" "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) as_fn_error $? "unrecognized option: '$1' +Try '$0 --help' for more information." ;; + + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \printf "%s\n" "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + printf "%s\n" "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + + *) as_fn_error $? "invalid argument: '$ac_config_target'" "$LINENO" 5;; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test ${CONFIG_FILES+y} || CONFIG_FILES=$config_files +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to '$tmp'. +$debug || +{ + tmp= ac_tmp= + trap 'exit_status=$? + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with './config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +_ACEOF + +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + + +eval set X " :F $CONFIG_FILES " +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag '$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain ':'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: '$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`printf "%s\n" "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is 'configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + printf "%s\n" "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +printf "%s\n" "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`printf "%s\n" "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +printf "%s\n" X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`printf "%s\n" "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`printf "%s\n" "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +printf "%s\n" "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when '$srcdir' = '.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable 'datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +printf "%s\n" "$as_me: WARNING: $ac_file contains a reference to the variable 'datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + + rm -f "$ac_tmp/stdin" + case $ac_file in + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + + + + esac + +done # for ac_tag + + +as_fn_exit 0 +_ACEOF +ac_clean_files=$ac_clean_files_save + +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || as_fn_exit 1 +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +printf "%s\n" "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + + diff --git a/configure.ac b/configure.ac new file mode 100644 index 0000000..ac07ee3 --- /dev/null +++ b/configure.ac @@ -0,0 +1,29 @@ +# Process this file with autoconf to produce a configure script. +AC_INIT([pkgconfig-sys-stubs],[1.0],[Simon.Urbanek@r-project.org]) +AC_CONFIG_SRCDIR([darwin/zlib.pc]) + +AC_CANONICAL_BUILD +AC_CANONICAL_HOST + +AC_PROG_SED + +AC_PREFIX_PROGRAM([pkg-config]) +AC_MSG_CHECKING([prefix]) +AC_MSG_RESULT([$prefix]) + +AC_MSG_CHECKING([for stubs matching host]) + +host_osname=$(echo ${host_os} | $SED -e 's/@<:@0-9.@:>@*$//') +host_osmajor=$(echo ${host_os} | $SED -e 's/@<:@.@:>@@<:@0-9.@:>@*$//') + +STUBS='' +test -d ${srcdir}/${host_osname} && STUBS="$STUBS ${srcdir}/${host_osname}" +test -d ${srcdir}/${host_osname}/${host_cpu} && STUBS="$STUBS ${srcdir}/${host_osname}/${host_cpu}" +test -d ${srcdir}/${host_osmajor} && STUBS="$STUBS ${srcdir}/${host_osmajor}" +test -d ${srcdir}/${host_osmajor}/${host_cpu} && STUBS="$STUBS ${srcdir}/${host_osmajor}/{host_cpu}" + +AC_MSG_RESULT([$STUBS]) +AC_SUBST([STUBS]) + +AC_CONFIG_FILES([Makefile]) +AC_OUTPUT diff --git a/darwin/libcurl.pc b/darwin/libcurl.pc new file mode 100644 index 0000000..c8e38f4 --- /dev/null +++ b/darwin/libcurl.pc @@ -0,0 +1,15 @@ +prefix=/usr +exec_prefix=${prefix} +libdir=${exec_prefix}/lib +includedir=${prefix}/include + +supported_protocols="DICT FILE FTP FTPS GOPHER GOPHERS HTTP HTTPS IMAP IMAPS LDAP LDAPS MQTT POP3 POP3S RTSP SMB SMBS SMTP SMTPS TELNET TFTP" +supported_features="AsynchDNS IPv6 Largefile GSS-API Kerberos SPNEGO NTLM NTLM_WB SSL libz HTTP2 UnixSockets HTTPS-proxy" + +Name: libcurl +URL: https://curl.se/ +Description: Library to transfer files with ftp, http, etc. +Version: 7.54.0 +Requires: +Cflags: -I${includedir} +Libs: -L${libdir} -lcurl diff --git a/darwin/libexslt.pc b/darwin/libexslt.pc new file mode 100644 index 0000000..c0b5f22 --- /dev/null +++ b/darwin/libexslt.pc @@ -0,0 +1,12 @@ +prefix=/usr +exec_prefix=${prefix} +libdir=${exec_prefix}/lib +includedir=${prefix}/include + + +Name: libexslt +Version: 0.8.13 +Description: EXSLT Extension library +Requires: libxml-2.0 +Libs: -L${libdir} -lexslt -lxslt -lxml2 -lz -lpthread -licucore -lm +Cflags: -I${includedir} diff --git a/darwin/libxml-2.0.pc b/darwin/libxml-2.0.pc new file mode 100644 index 0000000..f64f526 --- /dev/null +++ b/darwin/libxml-2.0.pc @@ -0,0 +1,16 @@ +## For use with macOS system libxml2, +## which seems to have been 2.9.4 (May 2016) for a long time +prefix=/usr +exec_prefix=${prefix} +libdir=${exec_prefix}/lib +includedir=${prefix}/include/libxml2 +modules=1 + +Name: libXML +Version: 2.9.4 +Description: libXML library version2. +Requires: +Libs: -lxml2 +## static libs most likely need -llzma -liconv +Libs.private: -lpthread -lz -lm +Cflags: -I${includedir} diff --git a/darwin/libxslt.pc b/darwin/libxslt.pc new file mode 100644 index 0000000..60fdd43 --- /dev/null +++ b/darwin/libxslt.pc @@ -0,0 +1,12 @@ +prefix=/usr +exec_prefix=${prefix} +libdir=${exec_prefix}/lib +includedir=${prefix}/include + + +Name: libxslt +Version: 1.1.24 +Description: XSLT library version 2. +Requires: libxml-2.0 +Libs: -L${libdir} -lxslt -lxml2 -lz -lpthread -licucore -lm +Cflags: -I${includedir} diff --git a/darwin/zlib.pc b/darwin/zlib.pc new file mode 100644 index 0000000..54f2711 --- /dev/null +++ b/darwin/zlib.pc @@ -0,0 +1,10 @@ +prefix=/usr +exec_prefix=${prefix} +libdir=${exec_prefix}/lib +includedir=${prefix}/include + +Name: zlib +Description: zlib (system) +Version: 1.2.11 +Libs: -lz +Cflags: -I${includedir}