Skip to content

Latest commit

 

History

History
174 lines (129 loc) · 6.31 KB

snpe.md

File metadata and controls

174 lines (129 loc) · 6.31 KB
Raw

Build for SNPE

It is quite simple to support snpe backend: Client/Server mode.

this mode

  1. Can split model convert and inference environments;
  • Inference irrelevant matters are done on host
  • We can get the real running results of gpu/npu instead of cpu simulation values

  1. Can cover cost-sensitive device, armv7/risc-v/mips chips meet product requirements, but often have limited support for Python;

  2. Can simplify mmdeploy installation steps. If you only want to convert snpe model and test, you don't need to compile the .whl package.

1. Run inference server

Download the prebuilt snpe inference server package, adb push it to the phone and execute. Note that the phone must have a qcom chip.

$ wget https://media.githubusercontent.com/media/tpoisonooo/mmdeploy_snpe_testdata/main/snpe-inference-server-1.59.tar.gz
...
$ sudo apt install adb
$ adb push snpe-inference-server-1.59.tar.gz  /data/local/tmp/

# decompress and execute
$ adb shell
venus:/ $ cd /data/local/tmp
130|venus:/data/local/tmp $ tar xvf snpe-inference-server-1.59.tar.gz
...
130|venus:/data/local/tmp $ source export1.59.sh
130|venus:/data/local/tmp $ ./inference_server
...
  Server listening on [::]:60000

At this point the inference service should print all the ipv6 and ipv4 addresses of the device and listen on the port.

tips:

  • If adb devices cannot find the device, may be:
    • Some cheap cables can only charge and cannot transmit data
    • or the "developer mode" of the phone is not turned on
  • If you need to compile the binary by self, please refer to NDK Cross Compiling snpe Inference Service
  • If a segmentation fault occurs when listening on a port, it may be because:
    • The port number is already occupied, use another port

2. Build mmdeploy

1) Environment

Matters Version Remarks
host OS ubuntu18.04 x86_64 snpe specified version
Python 3.6.0 snpe specified version

2) Installation

Download snpe-1.59 from the official website

$ unzip snpe-1.59.0.zip
$ export SNPE_ROOT=${PWD}/snpe-1.59.0.3230
$ cd /path/to/mmdeploy
$ export PYTHONPATH=${PWD}/service/snpe/client:${SNPE_ROOT}/lib/python:${PYTHONPATH}
$ export LD_LIBRARY_PATH=${SNPE_ROOT}/lib/x86_64-linux-clang:${LD_LIBRARY_PATH}
$ export PATH=${SNPE_ROOT}/bin/x86_64-linux-clang:${PATH}
$ python3 -m pip install -e .

3. Test the model

Take Resnet-18 as an example. First refer to documentation to install mmcls and use tools/deploy.py to convert the model.

$ export MODEL_CONFIG=/path/to/mmclassification/configs/resnet/resnet18_8xb16_cifar10.py
$ export MODEL_PATH=https://download.openmmlab.com/mmclassification/v0/resnet/resnet18_b16x8_cifar10_20210528-bd6371c8.pth

# Convert the model
$ cd /path/to/mmdeploy
$ python3 tools/deploy.py  configs/mmcls/classification_snpe_static.py $MODEL_CONFIG  $MODEL_PATH   /path/to/test.png   --work-dir resnet18   --device cpu  --uri 10.0.0.1\:60000  --dump-info

# Test
$ python3 tools/test.py configs/mmcls/classification_snpe_static.py   $MODEL_CONFIG    --model reset18/end2end.dlc   --metrics accuracy precision f1_score recall  --uri 10.0.0.1\:60000

Note that --uri is required to specify the ip and port of the snpe inference service, ipv4 and ipv6 addresses can be used.

4. Build SDK with Android SDK

If you also need to compile mmdeploy SDK with Android NDK, please continue reading.

1) Download NDK and OpenCV package and setup environment

# Download android OCV
$ export OPENCV_VERSION=4.5.4
$ wget https://github.com/opencv/opencv/releases/download/${OPENCV_VERSION}/opencv-${OPENCV_VERSION}-android-sdk.zip
$ unzip opencv-${OPENCV_VERSION}-android-sdk.zip

$ export ANDROID_OCV_ROOT=`realpath opencv-${OPENCV_VERSION}-android-sdk`

# Download ndk r23b
$ wget https://dl.google.com/android/repository/android-ndk-r23b-linux.zip
$ unzip android-ndk-r23b-linux.zip

$ export ANDROID_NDK_ROOT=`realpath android-ndk-r23b`

2) Compile mmdeploy SDK and demo

$ cd /path/to/mmdeploy
$ mkdir build && cd build
$ cmake .. \
  -DMMDEPLOY_BUILD_SDK=ON \
  -DCMAKE_TOOLCHAIN_FILE=${ANDROID_NDK_ROOT}/build/cmake/android.toolchain.cmake \
  -DMMDEPLOY_TARGET_BACKENDS=snpe \
  -DANDROID_ABI=arm64-v8a -DANDROID_PLATFORM=android-30  \
  -DANDROID_STL=c++_static  \
  -DOpenCV_DIR=${ANDROID_OCV_ROOT}/sdk/native/jni/abi-arm64-v8a \
  -DMMDEPLOY_BUILD_EXAMPLES=ON

  $ make && make install
  $ tree ./bin
./bin
├── image_classification
├── image_restorer
├── image_segmentation
├── mmdeploy_onnx2ncnn
├── object_detection
├── ocr
├── pose_detection
└── rotated_object_detection
Options Description
CMAKE_TOOLCHAIN_FILE Load NDK parameters, mainly used to select compiler
MMDEPLOY_TARGET_BACKENDS=snpe Inference backend
ANDROID_STL=c++_static In case of NDK environment can not find suitable c++ library
MMDEPLOY_SHARED_LIBS=ON snpe does not provide static library

Here is all cmake build option description.

3) Run the demo

First make sure that--dump-infois used during convert model, so that the resnet18 directory has the files required by the SDK such as pipeline.json.

adb push the model directory, executable file and .so to the device.

$ cd /path/to/mmdeploy
$ adb push resnet18  /data/local/tmp
$ adb push tests/data/tiger.jpeg /data/local/tmp/resnet18/

$ cd /path/to/install/
$ adb push lib /data/local/tmp
$ adb push bin/image_classification /data/local/tmp/resnet18/

Set up environment variable and execute the sample.

$ adb push /path/to/mmcls/demo/demo.JPEG /data/local/tmp
$ adb shell
venus:/ $ cd /data/local/tmp/resnet18
venus:/data/local/tmp/resnet18 $ export LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:/data/local/tmp/lib

venus:/data/local/tmp/resnet18 $ ./image_classification cpu ./  tiger.jpeg
..
label: 3, score: 0.3214